Jump to content

Silverware tray


topgun2

Recommended Posts

  • Moderators

Has anyone found a silverware tray that fits nicely into the drawers of the Elite II? Since those drawers measure 16.6 inches wide by 10 inches deep and 3 inches tall, they are not a "standard" size kitchen drawer.

 

Bill

2023 Ford F150 Lariat 3.5EB FX4 Max Towing, Max Payload, 2016 Oliver Elite II - Hull #117 "Twist"

Link to comment
Share on other sites

  • Moderators

Buzzy,

 

Thanks, but I'd already looked at each and every one of those on Amazon. I am hoping to find something that fits a bit better than any of the sizes that are listed there. If I can't find something I'll be reduced to making something.

 

Linda,

 

Could I bother you to take a picture? There are several way to mix and match, but without taxing my brain too much I didn't see a combination of bins that would result in a nice tight fit.

 

Bill

 

p.s. how's the trip doing?

2023 Ford F150 Lariat 3.5EB FX4 Max Towing, Max Payload, 2016 Oliver Elite II - Hull #117 "Twist"

Link to comment
Share on other sites

  • Moderators

Linda,

 

Thanks for the picture - of the silverware, remote control, and wine stuff drawers. Nice to see someone who has their priorities right with the wine stuff.

 

I thought that you two were supposed to hit the road yesterday?

 

Bill

2023 Ford F150 Lariat 3.5EB FX4 Max Towing, Max Payload, 2016 Oliver Elite II - Hull #117 "Twist"

Link to comment
Share on other sites

  • 2 months later...
  • Moderators

Thanks for looking for me - I've been a bit busy since I took delivery of Twist back in mid-February so I have not had a chance to look at this.

 

Bill

2023 Ford F150 Lariat 3.5EB FX4 Max Towing, Max Payload, 2016 Oliver Elite II - Hull #117 "Twist"

Link to comment
Share on other sites

  • 1 year later...

I know this is an old thread but no point starting a new one -

 

I found that the OXO drawer organizers are pretty much a perfect fit for the Oliver drawers.  The large ones are 16.5" wide and can be expanded to fit the depth perfectly, and their silverware tray at 15.5" is only an inch smaller in width than the drawer and the depth at 9.75" just a smidge shorter than the smaller top drawer.  It will expand in depth also, but that extra quarter inch isn't going to be very useful.  Like other OXO stuff, they're a bit more expensive than other options, but they're good quality and I like that they will fit just right and that the dividers can be customized.

 

On a related note, does anyone else wish that Oliver would put the deeper drawers on the bottom?   That's the usual arrangement and I typically find that the larger stuff is most often the least used.  I'm thinking that I may change mine around after delivery.

  • Thanks 1
Link to comment
Share on other sites

The Ed half of our team found these stick on brackets and used 1/4 inch wood for the dividers.  Customizable and pretty easy.  The can be purshased here http://www.leevalley.com/us/hardware/page.aspx?p=74182&cat=3,43722,43743

 

 

 

IMG_0076.thumb.jpg.258316db3d5d16c6e61db7077f310d11.jpg

  • Thanks 4

Ed and Marsha

Legacy Elite II, Hull #85

Ford F150 Lariat

 

Link to comment
Share on other sites

The Ed half of our team found these stick on brackets and used 1/4 inch wood for the dividers. Customizable and pretty easy. The can be purshased here http://www.leevalley.com/us/hardware/page.aspx?p=74182&cat=3,43722,43743  

 

That is a simple and elegant solution, thanks. I have fixed your link (use the third button from the right to make web url a clickable link):

 

http://www.leevalley.com/us/hardware/page.aspx?p=74182&cat=3,43722,43743

 

John Davies

 

Spokane WA

SOLD 07/23 "Mouse":  2017 Legacy Elite II Two Beds, Hull Number 218, See my HOW TO threads: https://olivertraveltrailers.com/topic/john-e-davies-how-to-threads-and-tech-articles-links/

Tow Vehicle: 2013 Land Cruiser 200, 32” LT tires, airbags, Safari snorkel, Maggiolina Grand Tour 360 Carbon RTT.

Link to comment
Share on other sites

The Ed half of our team found these stick on brackets and used 1/4 inch wood for the dividers. Customizable and pretty easy. The can be purshased here

That is a simple and elegant solution, thanks. I have fixed your link (use the third button from the right to make web url a clickable link): http://www.leevalley.com/us/hardware/page.aspx?p=74182&cat=3,43722,43743 John Davies Spokane WA

 

 

 

Thanks for  fixing the link - new iPad user.  Still figuring things out.

Ed and Marsha

Legacy Elite II, Hull #85

Ford F150 Lariat

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...