Jump to content
Sign in to follow this  
Trainman

Adding LED light to the awing

Recommended Posts

As you can see I'm going from one mode to another on our new Elite II, today I'm thinking about adding a LED light strip to the awing. I observed the awing and see the only place to put the strip lighting is either on the inside and it would have to be in two sections as the center swing bar hinge would be in the way for continuous running of the strip, or put it on the awing cover on the bottom side and the lights could be used with either the awning in or out. I'm thinking on the bottom of the awing cover makes more sense them inside the cover, but now I would have to have a power cord showing to run the LED's. Any thoughts on what you did if you installed LED awing lights.

 

 

 

trainman


Elite II, Twin Bed, Hull #489, 2019 RAM 1500, 5.7 Hemi, 4X4, Crew Cab, 5'7" bed, Towing Package, 3.92 Gears.

Share this post


Link to post
Share on other sites

I got a cheap string of Solar powered LED lights from Amazon, about 1” balls that we sometimes hang from the awning with Camco hooks that slide into the awning slot. They are not bright, just provide a mild ambience.  We use them depending on the Campground. Sometimes dark is better. What’s really annoying is campers the have strings of bright LEDs everywhere ruining the night sky.

  • Thanks 1

Mike and Carol | Fair Oaks Ranch, TX | 2016 Elite II #135 | 2020 Ram Rebel 4X4 5.7L Hemi

ALAZARCACOFLGAIDILKSKYLAMDMSMOMTNENVNMNYNCNDOHOKSCSDTNTXUTVAWVWYsm.jpg

 

Share this post


Link to post
Share on other sites

We use a Luminoodle Basecamp string light. I taped the connectors to the bottom of the awning with VHB tape.  Takes about a minute to set it up. It lights up the awning area well and attracts the bugs away from the door. Very groovy in disco mode.


Snowball • LE2 256 • 2018 Ford Raptor

Share this post


Link to post
Share on other sites

I've been giving these awing LED a lot of thought, I decided to go this way and put the LED strip lights in the aluminum holders made for them. https://www.amazon.com/Starlandled-Aluminum-Installation-Professional-Accessories/dp/B01LL2SLME/ref=sr_1_1_sspa?crid=IMEPCSPSMVFG&keywords=led+strip+lights+plastic+cover&qid=1565034448&s=gateway&sprefix=led+strip+lights+plastic%2Caps%2C154

 

I'm going to use double sticky tape to hold them in place and run them on the bottom edge of the Dometic awing frame, this way the lights will come out when the awing is rolled out, but will also work when the awing is in its rolled up position. I don't like seeing any wires so they will probably be mounted on the awing arms that go in and out on the top side and then into the trailer for power. I may even consider a 12v power source (battery) and recharge when needed as these lights are for accent lighting and only used when the occasion calls for it. I will post pics when completed, it was 101 in Ft. Worth yesterday, so working outside when it's a little cooler would sure be more to my liking for projects like this.

 

trainman

  • Thanks 2

Elite II, Twin Bed, Hull #489, 2019 RAM 1500, 5.7 Hemi, 4X4, Crew Cab, 5'7" bed, Towing Package, 3.92 Gears.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...