Jump to content

Looking for the best way to change out the bathroom faucet


Markmck

Recommended Posts

  • Moderators

Could you provide a little more information? What year is your Oliver? I’m pretty sure they changed out bathroom faucets at some point. Which faucet do you have?

 

You are going to need to remove the panel on the front of the sink pedestal to get to the connections. There should be four screws on the front (behind covers) and then cut through the caulking with a utility knife and pull the panel off. It will be tethered by an electrical connection for the water pump. Once you’re in there, you should be able to access the connections. When you replace the front panel you’ll want to re-caulk. It’s easy to do, you can find white caulk at Home Depot or Lowes. I did mine a few years ago and it still looks fine (not for a faucet replacement, we still have the original). Mike

  • Thanks 1

Texas Hill Country | 2016 Elite II #135 | 2020 Ram 2500 6.7L

ALAZARCACOFLGAIDILKSKYLAMDMSMOMTNENVNMNYNCNDOHOKSCSDTNTXUTVAWVWYsm.jpgALAZARCACOCTDEFLGAIDILINIAKSKYLAMEMDMAMS

Link to comment
Share on other sites

I can’t add to that, but I do suggest, if you have the Natures Head toilet, to find the unused water line that goes to the small ball valve on the floor behind the toilet. Cut and plug the supply line under the sink close to where it tees off the faucet cold water line. That way you will no longer have to winterize that pesky section of unused plumbing. It really should have been done at the factory when the NH was installed.

 

If you have a regular toilet, then never mind. Good luck.

 

John Davies

 

Spokane WA

  • Like 1

SOLD 07/23 "Mouse":  2017 Legacy Elite II Two Beds, Hull Number 218, See my HOW TO threads: https://olivertraveltrailers.com/topic/john-e-davies-how-to-threads-and-tech-articles-links/

Tow Vehicle: 2013 Land Cruiser 200, 32” LT tires, airbags, Safari snorkel, Maggiolina Grand Tour 360 Carbon RTT.

Link to comment
Share on other sites

I’ve been under my sink to realign the faucet after replacing the cartridge. Use plastic razor blades to remove old caulk from the shelf and vanity. ASI 0240 works real well to remove old caulk. ASI 335 is what I just used to reseal my shower pan. I think you’ll need one of these wrenches to keep from having to use a pair of Channellock plies which will mar your new faucet

 

9C3BBCBB-78BC-4EF9-853D-CC2BD0EB0072.thumb.jpeg.59b84e64110cec419330491739e1ba03.jpeg

 

Wrench in use

 

8C7822BF-5C04-4C29-B6A1-BC5B5D515353.thumb.jpeg.63ef2b1db921607c677fa5aaab9e892b.jpeg

 

What it looks like under there

 

7C2116E2-A55A-4345-8CF6-513E4450E95B.thumb.jpeg.8338bb3c4beb65023fe7d5e027f373f8.jpeg

 

Be sure to “clock” the faucet centerline so that it is perpendicular to the wall otherwise the wand will either hit the wall or swivel out from above the sink and the hot vs. cold adjustment will be awkward.

 

11F039BF-F901-4E52-95B8-B0445FC5D8DF.thumb.jpeg.8d50936a73aab95a7947dc4e4c240d5f.jpeg

 

730E2C3E-CB38-4732-B04E-FF6D9276F0C8.thumb.jpeg.ef3f2abec3b28fcfb7ab9721068a0274.jpeg

  • Thanks 6
  • Like 1

Bill and Martha

2018 LEII Hull 313

2019 Chevrolet 2500HD Duramax

 

Link to comment
Share on other sites

Bill, thanks very much for the great info and pretty pics. I have not been under there yet to cap off my toilet line, but this encourages me to do it. I like your annotations, looks like you use Photos in IOS. The notes really make the pictures more helpful.

 

Where would one get a thin long socket tool? Home Depot? Is it a standard size?

 

Thanks again.

 

John Davies

 

Spokane WA

 

 

 

 

  • Thanks 1
  • Like 1

SOLD 07/23 "Mouse":  2017 Legacy Elite II Two Beds, Hull Number 218, See my HOW TO threads: https://olivertraveltrailers.com/topic/john-e-davies-how-to-threads-and-tech-articles-links/

Tow Vehicle: 2013 Land Cruiser 200, 32” LT tires, airbags, Safari snorkel, Maggiolina Grand Tour 360 Carbon RTT.

Link to comment
Share on other sites

Where would one get a thin long socket tool? Home Depot? Is it a standard size?

 

Thanks John. The wrench comes in a set like this

 

https://www.harborfreight.com/shower-valve-socket-wrench-set-96322.html?cid=paid_google

 

I used the 29/32 x 31/32 wrench. You can get the wrench set at “most good hardware stores”.

 

As for the pictures, I take and edit them on my iPhone. It’s often frustrating but I can do it sitting in a chair in the shop.

Bill and Martha

2018 LEII Hull 313

2019 Chevrolet 2500HD Duramax

 

Link to comment
Share on other sites

...find the unused water line that goes to the small ball valve on the floor behind the toilet. Cut and plug the supply line under the sink close to where it tees off the faucet cold water line.

 

John, here’s the water line you mention

 

11FAAA21-E895-448A-97AB-D10A40FA789C.thumb.jpeg.3392571f86b759feb05c7033fa261901.jpeg

 

FF81FCEC-9ED1-4166-9D3F-77C34B07B2D5.thumb.jpeg.24bcff33016474286c8317b4f675ce4d.jpeg

 

 

  • Thanks 1

Bill and Martha

2018 LEII Hull 313

2019 Chevrolet 2500HD Duramax

 

Link to comment
Share on other sites

  • Moderators

Townesw, thanks for the great photos and instructions. I'm sure other users will find this very helpful through the years.

Sherry

  • Thanks 1

2008 Ram 1500 4 × 4

2008 Oliver Elite, Hull #12

Florida and Western North Carolina, or wherever the truck goes....

400 watts solar. DC compressor fridge. No inverter. 2 x 105 ah agm batteries .  Life is good.


        
 

 

 

Link to comment
Share on other sites

Just a suggestion ... whenever any owner opens up a hidden compartment like this, be sure to use nylon wire ties to secure dangling wires and hoses. The factory still has not learned this, it appears. This “rats nest” is very disappointing to me....

 

7293C0DD-DA15-45DE-BEA7-595FB35E8A23.thumb.jpeg.705b6ab9e57acdea99e0fb7432457cf8.jpeg

 

Loose wires and lines flop around, chafe, loosen or break electrical connections, start water leaks and just look untidy. Five minutes with ties makes things secure and you won’t worry so much about failures down the road. Adding split loom would be even better, but more time consuming and not absolutely needed.

 

John Davies

 

Spokane WA

  • Thanks 2

SOLD 07/23 "Mouse":  2017 Legacy Elite II Two Beds, Hull Number 218, See my HOW TO threads: https://olivertraveltrailers.com/topic/john-e-davies-how-to-threads-and-tech-articles-links/

Tow Vehicle: 2013 Land Cruiser 200, 32” LT tires, airbags, Safari snorkel, Maggiolina Grand Tour 360 Carbon RTT.

Link to comment
Share on other sites

  • 1 year later...

Thanks Bill, for the reference to this post. This will be helpful to untwist the hose. If I knew which way to turn it, or if it would be able to be untwisted without removing the front panel, I would do that. Maybe I should remove the front panel anyway to fix other issues, or to verify other issues are not there (or are).

Not securing wiring or plumbing is a surprise. That is rather important for any use, but when in a moving vehicle subject to vibrations and bouncing, it is imperative. At delivery, I was told that the refrigerator plug is now secured with a tie wrap. It would fall out due to vibration and weight of the cord. I don't like using a tie wrap. A "space saver" plug would have helped a lot. But it should be better than it was, for a while. 

John

  • Like 2

      

2014 Toyota Tacoma 4x4

2021 Elite I #758       

      image.png.d972b5fc86270818b1e0f030bfaa433a.pngMap of Provinces I Visited

Link to comment
Share on other sites

JD,

I am assuming that this is a view from the top into the bathroom vanity.

Within the black circle, are bolts like this covered on the protruding end, so they do not rub/abrade the water lines or wiring, or is the distance enough, so no problemo...

Finally, is that (yellow) romex in that area.  i have not seen any yet, in the few areas i have been looking into, but maybe i am just looking enough, or need to pay attention.

 

image.png.666d0c07d39a196e98265e10c3e452dc.png

 

Maggie & Bryan | Arnegard, ND | 2020 LE II "Twins" Hull #665 | 2021 RAM 2500  6.4L HEMI Gasser  4dr  6.5' bed

ABBCMBNBNTNSONPEQCSKYTALARCTDEFLGAILINIAKSKYLAMEMDMAMIMNMSMONENHNJNYNCNDOHOKPARISCSDTNTXVTVAWVWIxlg.jpg.d41b39fcf844ad1935d35acdc8a6c203.jpg

Link to comment
Share on other sites

  • 1 year later...
  • 1 month later...

It doesn't look like any wrench tools will help disassemble the faucet in my 2021 Elite 2. If anyone has any other ideas, I would love hear them. Really don't want to use a channel plier.

IMG_3020.thumb.jpg.a5800267cee9ee1b1169fc76e9c10b18.jpg

2021 Oliver Legacy Elite II - Hull #854
2021 Ford Expedition Platinum

Link to comment
Share on other sites

  • Moderators
8 hours ago, Sak said:

It doesn't look like any wrench tools will help disassemble the faucet in my 2021 Elite 2. If anyone has any other ideas, I would love hear them. Really don't want to use a channel plier.

IMG_3020.thumb.jpg.a5800267cee9ee1b1169fc76e9c10b18.jpg

Read this entire posting, there is a link to the proper tool under a post by Townesw.

 Mossey

  • Thanks 1
  • Like 2

Mike and Krunch   Lutz, FL  
2017 LEII #193 “the dog house”

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...