Collier and Joan 7 Posted January 8 Share Posted January 8 This morning while winterizing, I hook up my first jug of antifreeze to the rear inlet ,went Inside and turn on the water pump. Not a sound from the water pump, dead as a door knob, Light on water pump switch was lit, check under the side table at the water pump fuse and it look fined. I put in a new one to be sure, turn on water pump switch, pump switch lite came on but still not a peep from the water pump. Any suggestions, I look at the pump and didn't see anything loose. I have a 2019 Legacy II 2019 Oliver Legacy Elite II - Delivery Date Aug 29, 2019 Ford F150 XL Supercab - 3.5 EcoBoost Link to post Share on other sites
Moderators SeaDawg 1,553 Posted January 8 Moderators Share Posted January 8 I don't know about your trailer, but we have two switches for the pump. Main switch at the door. Switch in the kitchen. Don't think light would come on though, if main were off. At this point, I'd be looking for a loose connection. 2008 Ram 1500 4 × 4 2008 Oliver Elite, Hull #12 Link to post Share on other sites
Landrover 259 Posted January 8 Share Posted January 8 Loose connection most likely. You are winterizing has it been very cold for a long time? Make sure the pump itself did not freeze. Check the site bowl. Good luck Link to post Share on other sites
Collier and Joan 7 Posted January 8 Author Share Posted January 8 Has not been cold, winterized it a month ago with no problems, just got back from Florida where I de-winterized. 2019 Oliver Legacy Elite II - Delivery Date Aug 29, 2019 Ford F150 XL Supercab - 3.5 EcoBoost Link to post Share on other sites
BackofBeyond 816 Posted January 8 Share Posted January 8 Check voltage at the pump - no voltage - trace back to problem. 12v at pump - hmmm. Try to visually verify there is nothing in the pump - blocking action. With pump on - tap it a few times - a swift but gentle tap - if nothing happens, its probably a bad pump. 2 Cindy, Russell and "Harley dog" . Home is our little farm near Winchester TN 2018 Oliver Legacy Elite II - 2018 GMC 2500 Duramax "Die young - As late as possible" Link to post Share on other sites
mossemi 484 Posted January 9 Share Posted January 9 Check the second water pump switch switch in the bath. Still nothing, check the wiring at the switch if you don’t have power at the pump. Mossey 2 Mike and Krunch Lutz, FL LEII #193 “the dog house” Link to post Share on other sites
Cvh 3 Posted January 9 Share Posted January 9 Had the same problem. I found that one of the two red wires that enter into the front of the pump (as you’re looking at it from the hatch opening) was very loose when wiggling it. The loose terminal is actually inside the unit. Jason had the company send a new end cap that contains the built in wiring terminals . Suggest you call Jason for help. 1 2 Link to post Share on other sites
Collier and Joan 7 Posted February 10 Author Share Posted February 10 Just an update, did as Cvh suggested and put on a new end cap. The water pump work perfect after replacing the end cap. 3 4 2019 Oliver Legacy Elite II - Delivery Date Aug 29, 2019 Ford F150 XL Supercab - 3.5 EcoBoost Link to post Share on other sites
Moderators SeaDawg 1,553 Posted February 10 Moderators Share Posted February 10 Collier and Joan, Thanks for letting us know how your problem resolved. This will definitely help others, in the future. 2008 Ram 1500 4 × 4 2008 Oliver Elite, Hull #12 Link to post Share on other sites
Patriot 677 Posted February 10 Share Posted February 10 1 hour ago, Collier and Joan said: Just an update, did as Cvh suggested and put on a new end cap. The water pump work perfect after replacing the end cap. Great work! Glad it worked out! 2020 Ford F-250 6.7 liter Powerstroke Lariat Ultimate “Tremor” High Cap tow pkg - 2020 OLEII - Hull #634 Link to post Share on other sites
connor77 107 Posted February 10 Share Posted February 10 9 minutes ago, SeaDawg said: Collier and Joan, Thanks for letting us know how your problem resolved. This will definitely help others, in the future. Yes, agree wholeheartedly with SeaDawg. It's super helpful to others when an owner "closes the loop" on an issue that they've posted about. Sharing what actually fixed the issue is obviously very much appreciated as well. 1 2021 Elite 2 on order (June 2021 delivery) 2021 F250 7.3L Gas / 4.30 AR Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now