csevel Posted May 31, 2021 Share Posted May 31, 2021 Since I'm dealing with a number of messy issues with my new to me LE2, I wanted to shift my attention and share with y'all a couple recent mods that I'm proud of. Some were the genius of others on this forum that I copied and some are my own. 2 11 1 2020 Toyota Tundra TRD Sport 5.7L V8 2017 Oliver Legacy Elite II Hull #184 ~ "ILOVHER" Link to comment Share on other sites More sharing options...
Moderators SeaDawg Posted May 31, 2021 Moderators Share Posted May 31, 2021 You have been very, very busy! Nicely done! I especially like the shower head holder for the outside shower. Very useful. 2 1 2008 Ram 1500 4 × 4 2008 Oliver Elite, Hull #12 Florida and Western North Carolina, or wherever the truck goes.... 400 watts solar. DC compressor fridge. No inverter. 2 x 105 ah agm batteries . Life is good. Link to comment Share on other sites More sharing options...
GraniteStaters Posted July 27, 2021 Share Posted July 27, 2021 I like the holder in the closet that holds your aluminum foil etc. What did you use to attach it to the inside of the closet door? Looks like something (wood?, plastic?) was glued (with what?) to the inside of the closet door, then the rack was attached by screws into the wood/plastic. Nice mods! TIA. Paula David Caswell and Paula Saltmarsh Hull 509 "The Swallow" Link to comment Share on other sites More sharing options...
csevel Posted July 28, 2021 Author Share Posted July 28, 2021 23 hours ago, GraniteStaters said: I like the holder in the closet that holds your aluminum foil etc. What did you use to attach it to the inside of the closet door? Looks like something (wood?, plastic?) was glued (with what?) to the inside of the closet door, then the rack was attached by screws into the wood/plastic. Nice mods! TIA. Paula I used a square dowel rod cut to size and used Gorilla construction glue to hold it to the door. After it dried I just used screws to affix the holder to the dowel. This is the link for the bag holder. There are many choices in design but this worked well for my needs. Here is the link for the rack. https://www.amazon.com/dp/B00U86KJG6/ref=cm_sw_r_u_apap_KJZLBqNUa9LkA Happy modding! 1 1 2020 Toyota Tundra TRD Sport 5.7L V8 2017 Oliver Legacy Elite II Hull #184 ~ "ILOVHER" Link to comment Share on other sites More sharing options...
Free2Roam Posted August 15, 2021 Share Posted August 15, 2021 On 7/28/2021 at 4:48 PM, csevel said: I used a square dowel rod cut to size and used Gorilla construction glue to hold it to the door. After it dried I just used screws to affix the holder to the dowel. This is the link for the bag holder. There are many choices in design but this worked well for my needs. Here is the link for the rack. https://www.amazon.com/dp/B00U86KJG6/ref=cm_sw_r_u_apap_KJZLBqNUa9LkA Happy modding! I LOVE the curtain idea on the front door and bathroom! Did the command strip hooks stick to the textured surface of the front door on its own or did you have to add some adhesive? Also, would I be correct in assuming you cut down the curtains from a regular curtain or shower curtain? ~Angela 2017 Legacy Elite II Standard 2006 Chevy 2500 HD Diesel 4WD Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now