Jump to content

Dog House Weather Seal Replacement


connor77

Recommended Posts

My dog house weather seal is coming off and I'm wondering if people have replaced this with something different.  I'm talking about the squishy foam seal on the top edge of the dog house, not the cover.  I'm aware of what people have used for the cover edge and I have ordered this already.

This weather seal gets really dirty.  I'm wondering if there is something that would work that isn't quite as soft that might also be easier to clean. 

ALCTKYMENHNYNCPATNVTVAWVsm.jpg2021 Elite 2 Hull # 832 "Bucket List"

2021 F250 7.3L Gas / 4.30 AR

 

 

Link to comment
Share on other sites

  • Moderators

Interesting -

This is the first time I've heard about this seal "coming off".

Can you get a picture of it?

Bill

2023 Ford F150 Lariat 3.5EB FX4 Max Towing, Max Payload, 2016 Oliver Elite II - Hull #117 "Twist"

Link to comment
Share on other sites

This is with minimal pressure.  I am not "pulling" here.  Doesn't appear that there was ever a good bond between the black - I'm assuming butyl tape strip - and the fiberglass. 

I've asked Service to send me a piece of this so that I can replace it but I still wonder if there is something better out there. 

WeatherSeal.jpg

ALCTKYMENHNYNCPATNVTVAWVsm.jpg2021 Elite 2 Hull # 832 "Bucket List"

2021 F250 7.3L Gas / 4.30 AR

 

 

Link to comment
Share on other sites

  • Moderators

No wonder I never heard of it - my Elite II never had that in the first place!

I'd bet that Oliver started putting that seal on when they switched from the "old" rubber latches to those new fangled jobs.😁

Bill

  • Like 1

2023 Ford F150 Lariat 3.5EB FX4 Max Towing, Max Payload, 2016 Oliver Elite II - Hull #117 "Twist"

Link to comment
Share on other sites

My seal was the same way when I got home from picking it ours up. I removed about half of it and cleaned it and reattached with some adhesive. So far so good. I wondered if someone didn't clean well before attaching it at the factory.

  • Like 1

 

image.jpeg.09f40a09983d95bd862eb789e3430148.jpeg

2019 Ram 1500 5.7L V8, 3.92 axle ratio - 2020 LEll - Hull676

Link to comment
Share on other sites

  • Moderators

Did you use 3m vhb tape?

2008 Ram 1500 4 × 4

2008 Oliver Elite, Hull #12

Florida and Western North Carolina, or wherever the truck goes....

400 watts solar. DC compressor fridge. No inverter. 2 x 105 ah agm batteries .  Life is good.


        
 

 

 

Link to comment
Share on other sites

  • 3 weeks later...

This is EXACTLY the same problem I am having with R-Villa, Hull #803, which is only a year old.

What is the best adhesive to use to reseal it?

 

 

 

 

2021 Legacy Elite II  Twin Beds   "R-Villa" ~ Hull #803 

2021 GMC Denali HD, 6.6 L Duramax Turbo-Diesel, 10-speed Allison

ALARILINIAKYMNMSMOMTOHSDTNWIWYsm.jpg

Link to comment
Share on other sites

I am not sure if this is the best thing to seal it with, but like I mentioned earlier, I removed part of it, then cleaned it really well and used Gorilla Heavy Duty Construction Adhesive.  It has held up just fine for over a year and a half now.

IMG_5884.jpg

Edited by Ray Kimsey
Just adding picture
  • Thanks 2

 

image.jpeg.09f40a09983d95bd862eb789e3430148.jpeg

2019 Ram 1500 5.7L V8, 3.92 axle ratio - 2020 LEll - Hull676

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...