Rivernerd Posted October 22, 2022 Share Posted October 22, 2022 Did you try a heat gun with a plastic putty knife? Hull #1291 Central Idaho 2022 Elite II Tow Vehicle: 2019 Tundra Double Cab 4x4, 5.7L with tow package Link to comment Share on other sites More sharing options...
Ralph Mawyer Posted October 22, 2022 Share Posted October 22, 2022 Didn’t today, but likely the solution. I talked to service later in the day. They put two guys on top at the back corner and one inside pushing up. Then peal it back to front. 2020 Legacy Elite II : Hull 625 - 2013 Lexus LX 570 San Antonio/Boerne - Texas Hill Country Link to comment Share on other sites More sharing options...
bhncb Posted October 22, 2022 Share Posted October 22, 2022 47 minutes ago, Rivernerd said: Did you try a heat gun with a plastic putty knife? Any heat gun hotter than a hair dry will definitely damage the gelcoat. Be very careful using this method. Better to use a solvent, pressure, and patients. 1 Link to comment Share on other sites More sharing options...
Geronimo John Posted November 11, 2022 Share Posted November 11, 2022 Not sure where to post this, so picked this one. The Houghton unit uses a remote for control. As such, several have mentioned the desire for a spare one. To those owners this may be of interest from the RecPro web site: GJ TV: 2019 F-150 SuperCrew Lariat, 3.5L EcoBoost, Max Tow, FX-4, Rear Locker OLLIE: 2018 OE2 Hull 342, Twin Bed. OLLIE DIY’s: Timken Bearings, BB LiFePO4's, Victron 712 Smart, 350 Amp Master Switch, Houghton 3400, Victron Orion DC - DC, 3000-Watt Renogy Inverter, P.D. 60-amp Converter, Frig Dual Exhaust Fans, Kitchen Drawer Straps. TV DIY’s: 2 5/16" Anderson System, Nitto recon’s, Firestone Rear Air Bags, Bilstein 5100’s, Mud Flaps & Weather Tech all, installed Ham Radio (WH6JPR). Link to comment Share on other sites More sharing options...
Patriot Posted November 18, 2022 Share Posted November 18, 2022 On 10/21/2022 at 9:05 PM, bhncb said: Any heat gun hotter than a hair dry will definitely damage the gelcoat. Be very careful using this method. Better to use a solvent, pressure, and patients. Any further updates on the progress on removal of your Dometic AC and the install of the Truma? Patriot 2020 OLEII - Hull #634 aka- “XPLOR” 2021 F350 6.7 liter Diesel Lariat Ultimate Tremor Link to comment Share on other sites More sharing options...
Ralph Mawyer Posted November 18, 2022 Share Posted November 18, 2022 11 hours ago, Patriot said: Any further updates on the progress on removal of your Dometic AC and the install of the Truma? Patriot Nothing on my end. Tech said they’ had an inquiry from Florida. I was going to ping him and see if that went through. 1 2020 Legacy Elite II : Hull 625 - 2013 Lexus LX 570 San Antonio/Boerne - Texas Hill Country Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now