allenpamela Posted December 19, 2009 Share Posted December 19, 2009 I've noticed that the termination valve handles are getting hard to pull out when I empty the tanks. I'm not sure what I can use on them to make them slide easier. Does anyone have any suggestions? Hope everyone is having a great holiday and I especially enjoy reading the recent amazon.com comments! Pam Link to comment Share on other sites More sharing options...
Moderator+ ScubaRx Posted December 19, 2009 Moderator+ Share Posted December 19, 2009 Hi Pam and Allen, Merry Christmas... I found that the valve handle in the shower area that cuts off the drain got harder and harder to pull out/push in. I simply took my handy-dandy can of Water Displacement liquid - Formula # 40 ** and squirted some around where the shaft enters the casing and let it sit for a while. I moved the handle in and out a couple of times and squirted it again. After repeating this procedure a few times the thing slides pretty well now. I need to do this to the ones outside but it's one of those round tuits that I haven't gotten to yet. Hope this helps... ** (WD-40) Steve, Tali and our dog Rocky plus our beloved Storm, Maggie, Lucy and Reacher (all waiting at the Rainbow Bridge) 2008 Legacy Elite I - Outlaw Oliver, Hull #026 | 2014 Legacy Elite II - Outlaw Oliver, Hull #050 | 2022 Silverado High Country 3500HD SRW Diesel 4x4 Link to comment Share on other sites More sharing options...
allenpamela Posted December 20, 2009 Author Share Posted December 20, 2009 Thanks....WD40 came to mind but it's always good to hear that someone else used it. What would life be like without WD40 and duct tape! Merry Christmas! Link to comment Share on other sites More sharing options...
tumbleweed Posted December 22, 2009 Share Posted December 22, 2009 Merry Christmas !! We also use WD 40. Also on grey and black water handles. And almost anything else you can think of!!! Their website (google it) has thousands of uses. Sorry ya'll gonna' miss our wedding, hope to meet allenpamela and see Steve n Tali in the coming New Year Chuck n Geri n Scotty n Doogie Bowser Link to comment Share on other sites More sharing options...
allenpamela Posted December 22, 2009 Author Share Posted December 22, 2009 Going to stock up on WD40! Your wedding sounds like it would be a blast. Remember those of us out west and post pictures. Pam and Allen Link to comment Share on other sites More sharing options...
DCKiefer Posted December 26, 2009 Share Posted December 26, 2009 Just wanted to mention that the valves on our Oliver were rather difficult to opporate at first. I then noticed they had the cables zip tied to the side and I removed the zip tie allowing the cable to go where it naturally wanted to. After that the valves operated much more freely. Link to comment Share on other sites More sharing options...
tumbleweed Posted December 27, 2009 Share Posted December 27, 2009 Merry Christmas, Happy Holidays and the best in the New Years ! Where did you find the zip tyes?? Sorry you'll miss the wedding, hope to see you in 2010. Chuck Link to comment Share on other sites More sharing options...
DCKiefer Posted December 31, 2009 Share Posted December 31, 2009 I don't recall exactly where each of the three valve cables where tied off too, but if you look in the access area under the dinette seat near the bath and the one on the driver side rear, you may see them tied to some fixed object. The cables are black. The ties appear to force the cable into too sharp of a turn, which made it difficult to operate the valves. Release the ties allow for the widest possible turn of the cable. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now