Jump to content

Brian H.

Members
  • Posts

    3
  • Joined

  • Last visited

My Info

  • Gender or Couple
    Male

My RV or Travel Trailer

  • Do you own an Oliver Travel Trailer, other travel trailer or none?
    I own an Oliver Travel Trailer
  • Hull #
    1633
  • Year
    2025
  • Make
    Oliver
  • Model
    Legacy Elite II
  • Floor Plan
    Twin Bed Floor Plan

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Brian H.'s Achievements

Newbie

Newbie (1/14)

  • First Post
  • Conversation Starter
  • One Month Later
  • Week One Done

Recent Badges

1

Reputation

  1. Hello all, hull #1633. We picked up our LE2 this summer and went on several trips without issue. We went on a trip over Thanksgiving weekend excited to try some cold weather camping. The nighttime temps were getting into the mid to low 20 F range and days were around mid 40's. We ran the furnace a night and were very comfortable. on the last night I knew that one of the propane tanks may getting low so before bed I made sure that both tanks were open and felt comfortable that the automatic tank switch would switch the tanks if one went empty. This was not the case; I woke up at around 3am freezing with an error E2H on the furnace. I checked the stove, and it would not lite. I went out and made sure that the 2nd tank was full, and it was. i tried turning the switch so that it pointed to the full tank and tried to lite the stove again, no dice. I ended taking both tanks off swapping positions of the tanks and that did the trick and was able to get the furnace working again. So, my question is would the cold weather have caused the automatic tank switch to fail, or is it just broken?
  2. Thanks for the responses, I feel better. We turned the pump on while looking for the bathroom light 😂. It is off now.
  3. Hello all, new Oliver owner here. We have a legacy elite II hull # 1633. We are camping at a full hookup site connected to city water and accidentally turned the water pump on. Will this cause damage to the pump?
×
×
  • Create New...