ZLarryb
-
Posts
13 -
Joined
-
Last visited
Posts posted by ZLarryb
-
-
So turn it till it clicks and put a piece of tape on the light switch, awkward!
-
New electric-only refrigerator, how do you totally power it down? Hull 1467.
-
So that really helped a lot. There is still one that will not respond. I will try again tomorrow when I am fresh and will not cuss it. ;-), thanks again for the help.
-
That would never have occurred to me, back to the camper, thanks a lot!
-
1
-
-
Hull 1467, just picked up in January. I am trying to grease the axle fittings for the first time with little success. I bought a new locknlube grease gun and a 90 degree extension. I primed it ..... after a bit of a hassle.
Only one of the four of five fittings I have tried to grease have accepted it. The rest come out the front of the fitting, not into the fitting. I order another extension just in case it is faulty but I have a feeling it is me.
Any tricks or suggestions?
-
You are correct, Generation 3 uses RJ45 connectors and I have confirmed that everything must be shielded. While I am thinking about it, for others ....... I first tried a hole drill on the outside connection but had good success with a router blade for my Dremel, very easy. One other thing for those considering this. I want my Starlink to be powered by 12 V and there is now a relatively inexpensive device that means you don't have to cobble together different devices -- https://www.trioflatmount.com/shop/p/gen3-12vconversion, the company claims it used 4.5 amps. So, all my stuff is due today so I will see if I can get it to work, thanks for answering.
-
4
-
-
Hey Sak or others who might have done this. First, I must say running a new cable is not fun but I will get there.
My question is did it work? I have read there are requirements for the rj45 connector - they should be metal and shielded. Did the connection device from the outside of the camper to the inside present any problems because it is not metal and shielded. Just looking to see if there were any issues with connection. Thanks!
-
Sorry, did not see your post. So here are a couple of pictures. I am a bit concerned about stability but I think with the cushion it will be okay. Also, no claims to be a master carpenter just want some options, pickup next Wednesday so we will see. Second picture looks lopsided but I set it up unlevel in the drive.
-
2
-
-
We went with the twin configuration and I have built a simple insert for the space between the beds for those "special" occasions..... Yes, we went with toppers, thanks again for all the help
-
1
-
-
Thanks all, we are really getting excited.
-
3
-
1
-
-
Thanks a lot, will do
-
Taking delivery 1/3 and we are messing around with the bedding. I could not find the height of the cushions in the knowledge section. Does anyone know how thick they are? Thanks.
Starlink Installation Tips
in Ollie Modifications
Posted
I am using the trio flatmount converter and am very happy with it. Starlink has a mount for the router that easily screws into the upper cabinet and it snaps right in. It has held the router during travel with no issues.