Jump to content

Looking for a storage solution for a bike rack ramp. advice welcome!


John E Davies

Recommended Posts

I bought a 1–Up roof rack and mounted it on my Ollie’s rear crossbar in place of the cargo basket. I also got a Super Duty Single for the Land Cruiser. That rack has a place to store the ramp, a couple of big studs on the rear support piece. The roof rack (tray) has no provision for attaching the ramp. The ramp is 2” x 4.5” x 48” steel channel. I do not want to drill any extra holes in it, the powder coat will be compromised. I prefer to mount it vertically, on edge, forward of the tray, so as to not hinder access to the sewer area. I wonder if one of these would work?

3F829555-B0FA-4A4B-B378-1EAB89A9286A.thumb.jpeg.d1ae28efd6554a026c5f36e894cf1bd1.jpeg

4C1F0A19-34DA-48E4-AB9A-61B2BB757B7F.thumb.jpeg.f6f0590e97cafe3c29b429fac72c7b67.jpeg

I can fabricate a sort of cradle from aluminum angle and rubber, and just use a ratchet strap, but I was hoping for something premade and a little more elegant. Any ideas? If I had a pickup truck, the ramp could go in the bed. I do have a roof rack, but prefer not to carry the ramp up there.

Thanks for any comments. I’ll post a thread about the rack system when I am done. I am still drilling, my shop is a mess ….😳

John Davies

Spokane WA
 

E9168159-1C8D-488A-94F7-67529632AB6E.jpeg

2A9F12B0-5E3F-426A-8816-1525BA9A4E8A.jpeg

C4E5D25D-EF3D-4F3D-9A34-7FA80843381A.jpeg

D154F743-D904-41A3-ABFA-FEC4C4768072.jpeg

94EC095E-31C2-4D85-A8F5-E21D05461D57.jpeg

BFEC2E47-FBC5-47AC-AF51-858B1B61BF44.jpeg

  • Thanks 1
  • Like 1

SOLD 07/23 "Mouse":  2017 Legacy Elite II Two Beds, Hull Number 218, See my HOW TO threads: 

Tow Vehicle: 2013 Land Cruiser 200, 32” LT tires, airbags, Safari snorkel, Maggiolina Grand Tour 360 Carbon RTT.

Link to comment
Share on other sites

  • The title was changed to Looking for a storage solution for a bike rack ramp. advice welcome!
travel trailer units for sale
Find Oliver Travel Trailers for Sale
New Travel Trailers for Sale

Well, never mind. I ordered the "tap plate" plus the security bolts that the ramp attaches to on the regular Super Duty rack, it will work great to secure the ramp on my setup. You just slide on the ramp "keyhole" slots and tighten the bolts with a special allen wrench that has a pin in the center of the hole.

IMG_7674.thumb.jpeg.48ec48b860bf6e0ab59e5e6211f4b929.jpeg

 

John Davies

Spokane WA

  • Like 1

SOLD 07/23 "Mouse":  2017 Legacy Elite II Two Beds, Hull Number 218, See my HOW TO threads: 

Tow Vehicle: 2013 Land Cruiser 200, 32” LT tires, airbags, Safari snorkel, Maggiolina Grand Tour 360 Carbon RTT.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...