Gliddenwoods Posted Saturday at 11:58 PM Posted Saturday at 11:58 PM I recently purchased a couple Blu Technology Stainless Universal Hoses with quick release fittings as recommended by other Campers. I like the hoses because when not in use, and in storage, they take far less storage space than other hoses. However, when the hoses are not attached and the quick release fittings remain on my Oliver there is no cover for the fitting opening and the Oliver provided cover does not fit thus road dirt will be a problem. Any other Oliver owners with the same Blu Technology hose quick release fitting have a cover solution? Thanks. 2022 Oliver Legacy Elite II, Hull 1242, 9/26/22 Lithium Platinum Power/Solar Package Tow with Supercrew Cab 2019 F-150 4 x4, 5.0L 4-Valve V8 with 3.73 axle ratio & 157" wheelbase. F-150 GCWR of 16,900 lbs with maximum load trailer of 11,500 lbs.
Steve and MA Posted Sunday at 02:30 PM Posted Sunday at 02:30 PM Why not get another quick connector and thread it on to the plastic plug that was previously used to cover the water port? Steve & Mary Allyn San Antonio, TX 2022 LE II Hull #969 "Un Œuf", 2021 MB Sprinter 3500 "Polly"
Gliddenwoods Posted Sunday at 03:19 PM Author Posted Sunday at 03:19 PM That might work. 2022 Oliver Legacy Elite II, Hull 1242, 9/26/22 Lithium Platinum Power/Solar Package Tow with Supercrew Cab 2019 F-150 4 x4, 5.0L 4-Valve V8 with 3.73 axle ratio & 157" wheelbase. F-150 GCWR of 16,900 lbs with maximum load trailer of 11,500 lbs.
Coddiwomple Posted Sunday at 03:22 PM Posted Sunday at 03:22 PM We have Eley quick connects and contacted them directly. They recommended some covers (along with part numbers) from McMaster-Carr that fit perfectly for both male and female parts. Only problem is that you have to buy a bag full of them. So, you might try contacting Blu T support. With all that said, what works really well for us now is a 2" wide roll of blue painters tape to cover the outlets when traveling to protect from road grime. David & Martha from North Plains, Oregon. 2023 Elite 1 Hull 1382 "Coddiwomple" with full Truma & Lithium Pro packages. 2002 Toyota Tundra 4.7L. DC-DC Victron Orion XS 50 amp. Truma soft start.
Gliddenwoods Posted Sunday at 03:28 PM Author Posted Sunday at 03:28 PM Ahh...blue painter and duct tape; my go to tools. 1 2 2022 Oliver Legacy Elite II, Hull 1242, 9/26/22 Lithium Platinum Power/Solar Package Tow with Supercrew Cab 2019 F-150 4 x4, 5.0L 4-Valve V8 with 3.73 axle ratio & 157" wheelbase. F-150 GCWR of 16,900 lbs with maximum load trailer of 11,500 lbs.
Gliddenwoods Posted Monday at 03:01 PM Author Posted Monday at 03:01 PM We actually do offer dust caps for our quick connect fittings, they can find found here: https://goblutech.com/collections/accessories/products/dust-cover-plug-blu-tech-quick-connect 1 1 2022 Oliver Legacy Elite II, Hull 1242, 9/26/22 Lithium Platinum Power/Solar Package Tow with Supercrew Cab 2019 F-150 4 x4, 5.0L 4-Valve V8 with 3.73 axle ratio & 157" wheelbase. F-150 GCWR of 16,900 lbs with maximum load trailer of 11,500 lbs.
Gliddenwoods Posted 19 hours ago Author Posted 19 hours ago Ordered two dust cap combos. In photo one set is (partially) installed on hose end and on my Oliver. Other uninstalled set on floor. They fit very nice 2022 Oliver Legacy Elite II, Hull 1242, 9/26/22 Lithium Platinum Power/Solar Package Tow with Supercrew Cab 2019 F-150 4 x4, 5.0L 4-Valve V8 with 3.73 axle ratio & 157" wheelbase. F-150 GCWR of 16,900 lbs with maximum load trailer of 11,500 lbs.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now