hobo
-
Posts
370 -
Joined
-
Last visited
-
Days Won
3
Posts posted by hobo
-
-
Jut as an aside: When we ordered our trailer (hull #414), although we wanted a front and rear camera setup, Oliver no longer offered the front camera.
Did I miss something?
Hobo
-
Getting real now. Fine line between too much crap vs "what did we forget"?
-
Greetings All,Does anyone know if an EU 3000I by Honda will fit in the tongue box without mods? Its weight is about the max allowable in the tongue box, say about 150 lbs.MingyAccording to Honda specs: The EU3000IS has a footprint of 25.9 x 17.6 which I don’t believe will fit within the basket due to the front of the basket having angled, front corners. …
Our Yamaha EF3000iSEB’s footprint is 26.8″ x 17.5″ and it fits quite nicely in the box with the angled corners. It actually has about an inch clearance on either end and the back with about three inches in front.
Yes, I can see that now. What was throwing me off was the Oliver dimension of 16 3/4" (depth) up to the angle. However, since the basket width is 28" and the gen set is less than that, there is more front to back depth available than I was envisioning. Thanks for the input. Let's me think about the larger generator as an option.
-
Yes, looking forward to seeing the various gen sets and talking to the owners. I don't plan on purchasing anything until after the rally.
We actually attended last year (rented a cabin) in anticipation of taking delivery this May but not having been in the RV business (yet), didn't know all the right questions to ask. Really looking forward to this year's event when we actually have our trailer on hand.
Sure wish John D. from Washington was there. I would LOVE to see all the mods he's done to his trailer too.
-
OK, I can be talked into a G & T (too).
The fixings will ALWAYS be on hand for a good gin (tanqueray) & tonic. Come on by and I'll fix you up. I suspect my bride will have a variety of beer and wine available to share too. (I think that's why our TV is a full size truck).
-
1
-
-
KWR;
In the Photo, it looks like you have enough chairs and tables for the entire campground. Did you bring all those or are some of those from visiting neighbors?
Our plan is to carry only two chairs (initially anyway) and it will be BYOC for anyone else. Can the masses suggest the appropriate number of seats we should typically carry with us for proper etiquette?
-
I like the choice of beverage too!
That would be "Mrs" Hobo. I prefer gin and tonic.
-
Not exactly… the 3000 yamaha we own has a bigger tank, but our 1000 with a tiny tank runs longer. Because it uses less fuel, but produces less energy.
Have you looked at an auxiliary tank for a smaller genset? Like the honda 2200, or the yamaha?
Sherry
According to Honda specs, the run time on the EU2200is is 3.2 hrs @rated load, and 8.1 hrs at 1/4 load. The run time on the EU3000is is 7.1 hrs @ rated load, and 20.0 hrs @ 1/4 load. Not saying one is more efficient than the other but the larger fuel tank on the 3000 does mean less stopping to refill. On the down side, it's heavy as heck.
-
We use a Camp Chef. It is a two burner unit with an oven. We have even baked a cake in it. Biscuits too. We have a grill/griddle that we modified to fit the burners…
Maniac, Does the Camp Chef require any modifications to run directly off of the trailer external connections? We just purchased the Camp Chef three burner from Costco but don't have our trailer yet.
-
[attachment file=2 HOBOS.jpg]
Got the permanent tags for hull #414 which we will take delivery of on 1 May. This was the very last 2018 Elite II produced. Getting really excited.
-
4
-
-
Greetings All,
Does anyone know if an EU 3000I by Honda will fit in the tongue box without mods? Its weight is about the max allowable in the tongue box, say about 150 lbs.
Mingy
According to Honda specs: The EU3000IS has a footprint of 25.9 x 17.6 which I don't believe will fit within the basket due to the front of the basket having angled, front corners. Even the EU3000I (Handi) is 24.5 x 14.9 which I think again is too large. I was debating the same thing for our Ollie but research is showing it won't work without mods. Can't fit two EU2200i models side-by-side in there either.
I am considering the EU3000is because it has a 3.4 gallon fuel tank and therefore has over twice the run time as the EU2200i.
-
Pretty cool mimicking the Blue Angels and flying your Ollie upside down.
-
Somewhere along I-40 west, coming back from TN on the maiden voyage….. This is one reason we decided to call our new Elite II “Mouse”.
No license plate! We towed it bome without even a temporary and did not get noticed…. the gal at Oliver Trailers who was supposed to get the tag forgot. I don’t really recommend this.
John Davies
Spokane WA
I can understand no one noticing the lack of a license plate. When someone spots a UFO, they don't look for tail numbers.
-
1
-
2
-
-
I kept the ones in the fridge but purchased a sensor brand called SensorPush for under the beds and outside under the propane cover. The sensors are only about an inch and a quarter square by five eights thick. The batteries last for about a year and information is read by my smartphone by way of Bluetooth. They record both temperature and humidity and the information is in graph form along a time line with dates.
I saw those when I did my shopping last year. Real slick little units. But at $50 for each sensor it was a bit too much to swallow at the time. Still, I like the data logging capability, and an app is much easier to check from bed in the morning or outside the trailer than an LCD on a bulkhead with limited viewing angle.
How do you like them? Is the app reliable at reading temps? Like from the time you open the app, does it acquire the sensors pretty quickly? How well does it handle displaying multiple sensors?
I’m curious about your outside sensor location. Do you feel that having it under the propane cover gives you a fairly accurate measure of outdoor air temp?
I'm a confirmed Ollieholic. These threads are killing me too
-
We have ordered the 2 5/16 coupler for our trailer when we take delivery in May. The upgrade is not an "option" though. We had to pay the cost of them purchasing and installing the larger coupler as a service item. We'll end up with both the original 2" coupler as well as the 2 5/16" coupler when we drive away. Hey, we paid for it (the original 2" coupler), we might as well take it with us. Not sure what we'll do with it though. Might just give it to someone in the Oliver world who needs it for whatever reason.
-
1
-
-
We are taking delivery of our Oliver Elite II on 1 May and have the composting toilet option. Can someone tell me if any amount of media comes with the delivered trailer? Also, any suggestions as to what and where to purchase media for this unit and finally, how much should we carry around with us when traveling for a few weeks or so.
Thanks, Hobo
-
That sounds suspiciously like what happens to a camera bag with multiple Nikon bodies and lenses left sitting on the driveway as you are about to leave for a big trip.
OK, New item for my departure check list: "Look under trailer and TV for anything I don't want to crush."
-
Corcomi, fwiw, I’ve never had a manufacturer give me a hard time about parts and warranty labor, and I have never filled in a warranty card for any if the equipment. Norcold, Dometic, Alterra, Fantastic, among others, simply asked for proof of the date the rv went into service. Including the second year from Norcold, Alterra, and Dometic. Some were parts only, but went beyond the one year that Oliver wraps. Truma could be different, but I would doubt it.
I think the cards are more for people who buy assemblies as replacements. Even then, a receipt has been enough…in my experience.
Hang in there. Most of these manufacturers really do care about their reputation and goodwill in the marketplace.
A win for the good-guys!
-
John,
I have to agree, that's a nice ladder. Since I have a truck, it just might be the way to go.
Hobo
-
STAND DOWN: I JUST FOUND A PREVIOUS THREAD ON THIS. UNLESS SOMEONE HAS SOMETHING TO ADD> THANKS
I want to be able to address issues up-top while on the road if needed and therefore need a ladder of some nature.
I am thinking a collapsible ladder of some type. Any suggests, thought or recommendations relative to this subject?
Thanks, Hobo
-
We have a new Oliver on order and just wondering what the actual size of the outside opening to the storage area is, not the door opening, but the opening to the storage area. Just wanting to know so I can see what size grill and fire pit will fit through the opening for when traveling. If you have the inside dimensions of the storage area that would be nice to, but the door opening is what I really need, thanks.
trainman
Thanks for asking that question. I was wondering the same thing. We take delivery of ours 1 May.
-
Use rubber stems if the TPMS guy said they are OK. I like them and specifically choose them on my trucky vehicles where possible for resistance to impact damage. If you never tow on rougher unpaved roads (like the completely unmaintained tracks to those cool primitive spots along a forest road) you can use steel …. but keep in mind they are way more vulnerable to bashing into something hard.
It really depends on how long the stems are and the added extension of the transmitter – how far out they extend past the rim. The ones on my Land Cruiser are steel OEM so in this particular application they do fine, but they are fairly deeply recessed and also protected by oversized tires.
OTH rubber ones can be sliced by a kid trying out his brand new Buck knife….. everything is a tradeoff.
If you want the look of steel, specify rubber stems with chrome covers if they are available. They still will flex a little. But replacing all five plus balancing will probably cost you $75+. Is the extra cost worth it just for stems? Probably not, but you do need to at least get them balanced. To the best of my knowledge they still come unbalanced from the factory. Which is stupid…. and a whole different thread.
For the truly anal…
https://store.bleepinjeep.com/product/colby_valve/
John Davies
Spokane WA
John, Thanks for the info on the Colby valves. These are pretty cool and could be a life saver.
I contacted the manufacturer and they advised that the Colby valves are not compatible with TPMS but they can be used to fix a tire to get you home. They also advised that the valves can be re-used. This would be a nice thing to keep a few of in the toolbox in all my vehicles. You come up with some pretty unique findings.
-
1
-
-
I also carry a tire plug kit and have used it. These can be had for cheap and they are a very good tool to have along.
I had never heard of a tire plug kit. I quick search, and I saw a short how-to video. I am getting one of these!
Thanks for posting this. I learn so much on this forum!
Just make sure you understand, you can only plug the tread area of a tire. You cannot plug a sidewall puncture. If your damage is in the sidewall, it's spare tire time. This is a great thread. I always have tire plug kits on my ATVs too.
-
Perfect. Thanks.
Washing the Ollie etiquette question
in General Discussion
Posted
Picking up our trailer on 1 May and this is our first camping RV.
So when we arrive at a camping destination that is full service, what are the rules on washing the grit, grime, road spray off of the trailer? Are there places at campgrounds for doing this or it frowned upon? Just wondering how to keep it reasonably clean while out on the road.
Thanks for entertaining another "newbie" question.
Hobo