Wayne and Karen

Hi Rich thanks so much for answering. I had a feeling something wasn’t right. I am going to sit down and watch the Ollie videos again to learn more about the inverter etc. Electricity and batteries is not my forte but I know hubby and I need to learn more. We will follow your advice to check out the switches

Hi there hoping someone can offer advice. We have our Legacy Elite II 2023 model sitting in reasonable sun when parked between trips and all that is on inside is the refrigerator. Twice we have gone to check on her after about six days and the batteries are down to about 30% and the Jack wouldn’t even work. Shouldn’t the solar energy keep the batteries charged? Here is a photo of the inside panel. Can’t imagine that the fridge would drain more than the sun can replenish. Thanks!

Tim, I have been looking for some time to install a 2 inch hitch receiver on the back of my trailer and the modification you have done is exactly what I was looking for. I have a welder/fabricator that is ready to do my install in the next few weeks. Can you tell me the dimensions of the aluminum that you used for this modification and how thick it is? Assuming the thickness is only around 3 inches if you were using 3.5 inch bolts but wanted to confirm. Thanks Wayne

Wayne and Karen from Georgia site F20 Hull #1432 Voyager

Thank you all for your advice and examples. We may indeed go with folding bikes. That sounds like a good solution.

We have the Anderson Hitch for towing our Ollie hull number 1432. We are keen to buy a pair of e-bikes but don’t want to put them on a rack at the back of the Ollie Legacy Elite II. Does anyone have, or know of, a way to add a rack to the back of our Ram 1500 and still pull the Ollie with an Anderson hitch? Looking to buy lighter bikes but even then, each will be around 50 pounds. Total of 100 pounds.