Jump to content
Sign in to follow this  
djpinaz

Re-attaching inside trim

Recommended Posts

Anyone have any idea what is (or could be) used to attach the inside “chrome” trim piece that covers the seam between the upper and lower inner hull? I tried 3m double-sided foam tape. It wasn’t thick enough, so tried a double layer of it, but as suspected it didn’t hold. The material originally used has some thickness to it and has great holding strength.

 

 

Share this post


Link to post
Share on other sites

If you really want the "expert" answer, I'd give a call to the Service department - click on the tab at the top of this page.  On the other hand - I've used a product called "E-6000" with great results for both interior and exterior problems of this sort.  E-6000 can be obtained at Walmart, Ace Hardware, Lowes, Amazon, etc.  Make sure that the area is clean, apply E-6000, use painters tape to secure the band while the E-6000 dries.  After 12 to 24 hours remove the tape and be on your way.

E6000

  • Thanks 1

2017 Ford F150 Lariat 3.5EB FX4 Max Towing 2016 Oliver Elite II - Hull #117 "Twist"

Share this post


Link to post
Share on other sites

A section of the chrome strip between the bathroom sink and toilet started to come loose. I used This tape to reattach it.

It has held up great. Be sure to clean the area well before taping (remove all old tape residue with MEK), and then use 3M 4298 adhesion promoter as a "primer" so the tape bonds even better. You can buy them both together on Amazon.

Dave

 

  • Thanks 2

2015 Oliver Elite, Hull 107


1998 Ford E-250, 5.4 liter

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...