Gliddenwoods Posted November 2 Share Posted November 2 I will have my annual ceramic coating inspection and update next week and at that time the technician will strip the ceramic coating in locations to install the flexible window gutters other Oliver owners have installed. Quick questions: *How far (inches) above and beyond & down the sides of the windows do you recommend? *Any installation advice to share with the technician? Thanks. 1 2022 Oliver Legacy Elite II, Hull 1242, 9/26/22 Lithium Platinum Power/Solar Package Tow with Supercrew Cab 2019 F-150 4 x4, 5.0L 4-Valve V8 with 3.73 axle ratio & 157" wheelbase. F-150 GCWR of 16,900 lbs with maximum load trailer of 11,500 lbs. Link to comment Share on other sites More sharing options...
Moderators topgun2 Posted November 2 Moderators Share Posted November 2 As has been written many time here on the Forum - install these "gutters" on a very warm day and/or use a hair dryer or strong warm sun to warm both the area where the gutters will go and the gutters themselves, clean the area where they are to be applied VERY well, apply blue painters tape over the gutters to hold them securely in place for at least 24 hours. Due to the gutters wanting to stay straight and not bend around the curve of the windows, the more surface area that you give to be stuck to the side of the camper the better. If I had mine to do over again, I'd take the gutter down the sides of the windows just shy of 1/2 way - I only went down about 3 inches and that is not enough. Good luck! Bill 1 7 2023 Ford F150 Lariat 3.5EB FX4 Max Towing, Max Payload, 2016 Oliver Elite II - Hull #117 "Twist" Near Asheville, NC Link to comment Share on other sites More sharing options...
Geronimo John Posted Wednesday at 08:09 PM Share Posted Wednesday at 08:09 PM On 11/2/2024 at 5:06 AM, topgun2 said: If I had mine to do over again, I'd take the gutter down the sides of the windows just shy of 1/2 way - I only went down about 3 inches and that is not enough. Bill: Once again sage advice regardless of which product to be used. On 11/2/2024 at 3:52 AM, Gliddenwoods said: *Any installation advice to share with the technician? I tend to latch on to good recommendations and "immortalize" them into a Do-It-Yourself guides. Attached are two of mine that I intend on using in the Summer 2025 voyage around the US. As always, many much smarter owner's work has shamefully been copied for these guides. GJDIY - Ollie EZ Gutters From John D's Post.docxDIY - Trim Lock Drip Rail (Oct 2024).docx 1 2 TV: 2019 F-150 SuperCrew Lariat, 3.5L EcoBoost, Max Tow, FX-4, Rear Locker OLLIE: 2018 OE2 Hull 342, Twin Bed. OLLIE DIY’s: Timken Bearings, BB LiFePO4's, Victron 712 Smart, 350 Amp Master Switch, Houghton 3400, Victron Orion DC - DC, 3000-Watt Renogy Inverter, P.D. 60-amp Converter, Frig Dual Exhaust Fans, Kitchen Drawer Straps. TV DIY’s: 2 5/16" Anderson System, Nitto recon’s, Firestone Rear Air Bags, Bilstein 5100’s, Mud Flaps & Weather Tech all, installed Ham Radio (WH6JPR). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now