jd1923 Posted November 14 Posted November 14 (edited) Several Oliver owners have installed the Orion XS DC-DC charger to take advantage of excess power created by the truck alternator to charge the house batteries. What a great accessory to have for those who generally camp unplugged! What if after camping for a few days with the tow vehicle parked, you left an interior light on or something and the TV batteries drained? Can't start the engine! Have you worried about this when well off the beaten path? I have, so I carry a 10 AWG extension cord and a 10A battery charger with us when traveling, just in case. Some of us have camping accessories mounted in the TV. We have a Dometic CFX5 45L in the pickup bed. We also have a router/Wi-Fi/Starlink setup, a whole system of electrical equipment installed behind the back seat of the TV. It draws 1.5A 24x7 and double that number when Starlink is running. The CFX5 is rated at 7.2A on 12VDC though it uses about 4A on average. This is a lot of hardware to run on the TV starter batteries, so some install a dedicated power supply. What I did was to add a 100W Renogy panel mounted to the truck toolbox and a small Victron MPPT 15A SC mounted inside the toolbox, all integrated to the starter batteries (see pic1). The SC has a separate LOAD output which is wired directly to the fridge (under the OnlyFire cover). It has worked well most of the time. By day end (when sunny), the TV starter batteries are at full charge and normally there is ample voltage to run through the night. On a short on trip recently, we packed up after 4 days boondocking and the TV would not start. The 2 starter batteries had gotten down to 11.8V! I got the charger and extension cord out and it took a 40 minute charge to start the engine. First off, after over a year of use, I think our Renogy panel is getting weak. The best reading I'm getting on a sunny Arizona day is 40W. It is the winter sky but even when I park uphill getting a better angle 40W is still the max. When it was new it regularly read from 60-70W on the app. So, my system needs some further troubleshooting and work, but there's something new for the Orion -- Orion emergency charging! With a Sept 2026 firmware upgrade, Victron added a new feature to the Orion XS (50A and 70A chargers, sorry not the 30A). It's amazing! So I parked the TV in front of the Oliver a couple days ago, connected the DC-DC cable and then drained the TV batteries on purpose. After 2 days with rain and clouds yesterday, it read only 11.9V this morning. In fact, either the Pepwave router or Arris Wi-Fi shut down so we had no Internet (our travel system is also our Home network). After a 15 minute 25A emergency charge, voltage on the starter batteries were up to 12.1V. I repowered the router system after starting this charge process a second time. This only uses 6Ah (25A / 0.25 hr) from your house batteries which anybody with LiFePO4 can afford. I repeated the reverse charge process four (4) times, waiting about 10 minutes in between (must wait 5 min). So I used 25A total of our 900 Ah store, was 99% and then 96% SOC which as soon as the sun comes out will recharge from the Oliver rooftop solar. Got the TV up to 12.4V which is certainly enough to start the engine. The new Orion Emergency Start is so cool (pic2). Note there is 6.2A (25A - 18.8A) difference between the two screens which means rooftop solar was adding about 8A less the 1.8A for normal stuff running. It's like we get a new charging system with only a firmware upgrade! 😎 https://professional.victronenergy.com/app/news/382 Edited November 14 by jd1923 1 1 Chris & John in Prescott, AZ | 2016 EII #113 | '01 Ram 2500 Cummins!
Dean and Mary Posted November 15 Posted November 15 5 hours ago, jd1923 said: With a Sept 2026 firmware upgrade, Victron added a new feature to the Orion XS (50A and 70A chargers, sorry not the 30A). It's amazing! So I parked the TV in front of the Oliver a couple days ago, connected the DC-DC cable and then drained the TV batteries on purpose. After 2 days with rain and clouds yesterday, it read only 11.9V this morning. In fact, either the Pepwave router or Arris Wi-Fi shut down so we had no Internet (our travel system is also our Home network). After a 15 minute 25A emergency charge, voltage on the starter batteries were up to 12.1V. I repowered the router system after starting this charge process a second time. This only uses 6Ah (25A / 0.25 hr) from your house batteries which anybody with LiFePO4 can afford. I repeated the reverse charge process four (4) times, waiting about 10 minutes in between (must wait 5 min). So I used 25A total of our 900 Ah store, was 99% and then 96% SOC which as soon as the sun comes out will recharge from the Oliver rooftop solar. Got the TV up to 12.4V which is certainly enough to start the engine. The new Orion Emergency Start is so cool (pic2). Note there is 6.2A (25A - 18.8A) difference between the two screens which means rooftop solar was adding about 8A less the 1.8A for normal stuff running. It's like we get a new charging system with only a firmware upgrade! I agree that the reverse charging feature makes the additional installation of a DC to DC charger effort even more worthwhile. What impressed me most is that you didn't just report that it worked, you actually tested it and then shared the results. That kind of firsthand information is incredibly valuable. Wow, thanks for taking the time to do that. Dean 1 2 TV: 2019 F-150 Super Crew Lariat, 3.5L EcoBoost, 10 Speed Transmission, Max Tow and Offroad package. Oliver: 2022 – Hull 953, Twin Bed, with Lithium Platinum Package (640ah Lithionics lithium batteries), Outdoor Pro Package, 16” wheels, D52 axles, 5-leaf Alcan Spring package, Bulldog HD Shock Absorbers, 2 5/16 Bulldog coupler and LT tires. After market: Victron MultiPlus-II 12/4000, Two Victron 100/50 MPPT Solar Charge Controllers, Victron IP65 500A/50mV SmartShunt, Victron Lynx Distributor, Orion DC-DC charger 12/12V 50A 700W, Cerbo GX MK2 with GX Touch 70 Display. Misc: Custom Wood Accessories by Foybles. Seabiscuit Metal Designs front storage box and moose rack.
ScottyGS Posted November 15 Posted November 15 So that would include the Victron Ori242417040, 50 amp charger? This is good news. My install is happening right now. I am scheduled for pick up on Dec 4th. I will have to make sure the most current update is installed. Thanks John! Scotty 1 Gregg & Donna Scott and Missy the Westie - The Flying Sea Turtle - 2016 Hull # 145 2024 Nissan Titan XD - Western NC
jd1923 Posted November 15 Author Posted November 15 14 hours ago, Dean and Mary said: That kind of firsthand information is incredibly valuable. Wow, thanks for taking the time to do that. Thanks Dean, and I appreciate that as a new owner you're diving into your major mod head first, while reading, learning, and appreciating new ideas as you build your Oliver. The true learning is in the doing, so you must be learning a lot and soon should have the best yet Oliver electrical system out there. Yes, an installation is not final until field tested! 🤠 And it works. As you know, I started troubleshooting our Orion since recently it was not charging up to par. First thing I noticed was the new firmware upgrade and I installed it. My issue was fixed by properly configuring the voltage settings on engine shutdown detection. It took another day or two, since in the app I'm usually just reading V and A numbers. Then with another look there was the new symbol, looking like a check engine light. I clicked on it and the Start Emergency Charge notice came up. Before proceeding, I looked in the Orion 50 manual and found nothing. Then I searched online and found the technical press release (for warning screen print and Victron link see original post). 5 hours ago, ScottyGS said: So that would include the Victron Ori242417040, 50 amp charger? This is good news. Yes Scotty, it includes the 50A and new 70A chargers that share the same HW and SW platform (the 30A HW is obviously different and so must be the SW). Scotty is running a whole series of upgrades for a proper rebirth after 10 years of Oliver ownership! 😎 I do everything from apps, no Cerbo and display monitor. Every device on the Victron Connect app has the little gear top right for configuration/setup. When firmware upgrade is available it will have a visual notification. It's easy to spot and with a few clicks easy to install when in Bluetooth range of the device and the phone has service or Wi-Fi connection. It's a great safety feature for towing, knowing you can always recharge a weak starter battery. I wish the charge rate and time would be variable or what would be more useful for me would be 20A full hour charge. If your batteries are too low to start the engine, the quick 25A 15 minute charge is not nearly enough, so you may need to run it 2-3 times, 5 minute pause between charges. The picture shows the new engine icon (top left), 13.5V on the Input (house batteries) and 0.0V on the Output, since at the time the cable to the TV was disconnected (open circuit). When connected and engine OFF the Output will display the starter battery voltage. This number can be checked first to see if starter battery charging is necessary. 😎 1 Chris & John in Prescott, AZ | 2016 EII #113 | '01 Ram 2500 Cummins!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now