aaronorange Posted June 10, 2023 Share Posted June 10, 2023 Does anyone know the Oliver factory breaker setting Xantrex freedom 3000. I set it to 20 while on a household 20 amp circuit but will be going back to a 30 amp service. Can I leave it on 20 amp? If I remember corectly it was set to 30 amp. But it would trip the inverter off when using a 20 amp houshold service. I see some people online set it to 25 or 28 amp. I did find this topic/thread but it did not answer the Oliver recomended/factory setting 🙂 Thank you! https://olivertraveltrailers.com/forums/topic/7081-dometic-ac-plus-xantrex-charger-on-home-20a-circuit/ Hull #1238 - Legacy Elite II, TB. TV 2017 Tundra TRD. Link to comment Share on other sites More sharing options...
Galway Girl Posted June 10, 2023 Share Posted June 10, 2023 Inverter_Charger_Settings_Table.pdf This is from the Knowledge Base in the Support Section of the Oliver Website: 1 2019 Elite II (Hull 505 - Galway Girl - August 7, 2019 Delivery) Tow Vehicle: 2021 F350 King Ranch, FX4, MaxTow Package, 10 Speed, 3.55 Rear Axle Batteries Upgrade: Dual 315GTX Lithionics Lithiums - 630AH Total Inverter/Charger: Xantrex 2000Pro Travel BLOG: https://4-ever-hitched.com Link to comment Share on other sites More sharing options...
rich.dev Posted June 10, 2023 Share Posted June 10, 2023 ...and then there's this from Oliver that shows it at 25A 1 2023 Elite II, Hull# 1386, Lithium Platinum Package (640AH, 400W Roof Solar, 3000W Xantrex Inverter), added 400W Renogy Solar suitcase with Victron MPPT 100/30 CC, Truma water heater & AC TV: 2024 Silverado 2500HD 6.6L 10-Speed Allison Link to comment Share on other sites More sharing options...
Rolind Posted June 10, 2023 Share Posted June 10, 2023 Here are the settings on our freedom xc from the factory 1 Robert and Cheryl, Louisville, KY, Legacy Elite II Hull #1390 Oliphino, TV F250 Tremor Link to comment Share on other sites More sharing options...
aaronorange Posted June 19, 2023 Author Share Posted June 19, 2023 Thanks everyone! just got back from our 1st shake down trip. I was hooked up to a 30 amp pedestal so I tried putting it back to the original setting of 30 amps in the Xantrex app. That tripped the breaker, so I went to 25 amps and everything worked good. Hope this helps someone else someday. Hull #1238 - Legacy Elite II, TB. TV 2017 Tundra TRD. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now