Victron MP2 with (2) Epoch 460ah batteries. DAY #1 Removal, rewiring, mounts, routing wires

[johnwen]

25 minutes ago, johnwen said:

JD, not that it matters much but my unit is a 2000w pro.  I will retest now.

JD,

After changing the setting I disconnected shore power and this time all worked fine.  Last (and only) time the inverter came on for a few seconds and shut off.  Maybe  something else was going on...but for now it's ok.  Will check again at the "Q".

Thanks for the help :)

John

[johnwen]

On 1/14/2025 at 6:36 PM, rich.dev said:

I can do that with my Xantrex 3000. Go into the Xantrex app, scroll down to Charger, click on "Charger Ignition Control", swipe up to change "off" to "Auto-on" then click "apply". 

Thanks, rich.dev

I think problem may be solved :)