water pump will not start

[Gliddenwoods]

Doing my end of the season sanitizing and when I tried to turn on the pump to draw in from the boondocking port the water pump did not start/make any noise. Check the 15 fuse  and is good. Is there another "in-line" fuse for the water pump somewhere?

Or other items I should check?

Thanks.

 

[jd1923]

23 minutes ago, Gliddenwoods said:

Or other items I should check?

Read voltage at the fuse connected to the water pump (red wire), to the ground (black wire). If you have 12VDC then you need a new pump. If so, I suggested upgrading to a premium model.

If no voltage, then there may be another fuse, or a disconnected or bad wire.

Testing for voltage is always step one. Use voltmeter/multimeter or a simple 12V test light: https://a.co/d/if7BSpi

Edited yesterday at 05:52 PM by jd1923

[Gliddenwoods]

Found the problem.

Wires behind Seelevel II were not connected completely.

Easy fix once found.

Jason at Oliver was a great help; thanks to Jason!

[topgun2]

1 hour ago, jd1923 said:

If no voltage, then there may be another fuse, or a disconnected or bad wire.

Strange how this works!😁