Jps190 Posted May 23 Share Posted May 23 I am finishing up installing the Isotherm fridge in my 2021 Oliver. I removed the Norcold 3-Way fridge and stripped the 2 circuit boards and front control panel. They are free to anyone who wants them. Just pay the shipping costs. John 4 John and Kim 2021 GMC Sierra 2500 AT4 6.6L Duramax 11350 GVWR 3048lb Payload 2021 Oliver Elite II. Hull #887 Link to comment Share on other sites More sharing options...
mountainoliver Posted May 23 Share Posted May 23 Do you have any photos of the installation? I’ve already installed a compressor fridge in my trailer five years ago but, there may be others who would be very interested in seeing the installation (I am as well!). Thanks 2 1 2017 Elite II, Hull #208 2019 Chevy HD 2500 Duramax Link to comment Share on other sites More sharing options...
Jps190 Posted May 23 Author Share Posted May 23 2 hours ago, mountainoliver said: Do you have any photos of the installation? I’ve already installed a compressor fridge in my trailer five years ago but, there may be others who would be very interested in seeing the installation (I am as well!). Thanks I'm not completely done just yet. I was able to extract the face frame from the Norcold to use instead of creating a whole new frame. I still need to get that installed and figure out some vent covers and where I am going to mount the Isotherm ITC controller. My install is very similar to John Davies with regards to building a platform and wiring everything to a bus bar on top of the fridge. I was lucky in the fact that my cabinet area was relatively square. I'll post some finish pics when I'm done. John 1 2 John and Kim 2021 GMC Sierra 2500 AT4 6.6L Duramax 11350 GVWR 3048lb Payload 2021 Oliver Elite II. Hull #887 Link to comment Share on other sites More sharing options...
Ronbrink Posted May 24 Share Posted May 24 16 hours ago, Jps190 said: They are free to anyone who wants them. Just pay the shipping costs. PM me if still available, thanks! 1 2020 OLEll, Twin, 579: No installed solar, Renogy 40A DC-DC charger, 460Ah LFP battery bank/Victron SmartShunt, Hughes Autoformer, dual Lagun tables, auxiliary Cerbo-S GX/Victron 30A Blue Smart IP22 Charger combo, Dreiha Atmos 4.4 a/c upgrade. 2019 GMC Savana 2500 Cargo Van: 6.0L V8 Vortec, 6-Speed Automatic; Explorer Limited SE, Low-Top 7 Passenger van conversion, RWD. Link to comment Share on other sites More sharing options...
Jim and Frances Posted May 24 Share Posted May 24 (edited) @Jps190 - I would love to take them off your hands! Just PM me and I can send you the bucks! Whoops - sorry @Ronbrink - didn't see your message. I have a bad display board on mine. 😞 Edited May 24 by Jim and Frances 1 SE Texas | 2021 Elite II Twin Bed # 927 "Lucy" | 2019 F250 FX4 6.7 Link to comment Share on other sites More sharing options...
Jim and Frances Posted May 24 Share Posted May 24 @Jps190 - quick question....How exactly does the front control panel come off? Just to confirm what the factory has told me, must the frig be removed to get to the screws that affix the front control panel to the frig? Thanks much! SE Texas | 2021 Elite II Twin Bed # 927 "Lucy" | 2019 F250 FX4 6.7 Link to comment Share on other sites More sharing options...
Ronbrink Posted May 24 Share Posted May 24 4 hours ago, Jim and Frances said: Whoops - sorry @Ronbrink - didn't see your message. I have a bad display board on mine. 😞 Not a problem, you have an immediate need so hope @Jps190 can help you! 2 2020 OLEll, Twin, 579: No installed solar, Renogy 40A DC-DC charger, 460Ah LFP battery bank/Victron SmartShunt, Hughes Autoformer, dual Lagun tables, auxiliary Cerbo-S GX/Victron 30A Blue Smart IP22 Charger combo, Dreiha Atmos 4.4 a/c upgrade. 2019 GMC Savana 2500 Cargo Van: 6.0L V8 Vortec, 6-Speed Automatic; Explorer Limited SE, Low-Top 7 Passenger van conversion, RWD. Link to comment Share on other sites More sharing options...
Jps190 Posted May 24 Author Share Posted May 24 Looks Like Jim is the lucky winner. I’ll be in touch. John 4 1 John and Kim 2021 GMC Sierra 2500 AT4 6.6L Duramax 11350 GVWR 3048lb Payload 2021 Oliver Elite II. Hull #887 Link to comment Share on other sites More sharing options...
Jim and Frances Posted May 24 Share Posted May 24 Thanks so much!!! You are a scholar and a gentleman! 1 SE Texas | 2021 Elite II Twin Bed # 927 "Lucy" | 2019 F250 FX4 6.7 Link to comment Share on other sites More sharing options...
Jps190 Posted May 28 Author Share Posted May 28 On 5/24/2024 at 8:02 AM, Jim and Frances said: @Jps190 - quick question....How exactly does the front control panel come off? Just to confirm what the factory has told me, must the frig be removed to get to the screws that affix the front control panel to the frig? Thanks much! There is no way to remove the screws from the front without pulling the fridge out. You may be able to get to the screws through the upper vent on the outside of the trailer. There are only 2 of them if I recall correctly. John John and Kim 2021 GMC Sierra 2500 AT4 6.6L Duramax 11350 GVWR 3048lb Payload 2021 Oliver Elite II. Hull #887 Link to comment Share on other sites More sharing options...
Jim and Frances Posted June 7 Share Posted June 7 Thanks for info. SE Texas | 2021 Elite II Twin Bed # 927 "Lucy" | 2019 F250 FX4 6.7 Link to comment Share on other sites More sharing options...
Jps190 Posted July 25 Author Share Posted July 25 It’s been awhile but here is how the final install turned out. The fridge fit perfectly into the old surround that I scavenged from the norcold. I planed down a piece of walnut to cover the hole, install the digital display and add a vent. Overall turned out great. 7 John and Kim 2021 GMC Sierra 2500 AT4 6.6L Duramax 11350 GVWR 3048lb Payload 2021 Oliver Elite II. Hull #887 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now