Window weather stripping

[Olive2Roam]

Does anybody have a supplier for the weatherstripping that goes around the windows in a 2024? That stuff is nearly impossible to get clean and I would just like to replace it all. It comes from Lippert, but Oliver hasn’t been able to get them to provide any replacement rolls of the stuff.

Appreciate your thoughts.
Bob

 

Edited yesterday at 02:44 PM by Olive2Roam

[Dean and Mary]

 

Steele Rubber Products sells window molding weather strip (part # 70-4500-257), and it worked perfectly on my 2022 Oliver Elite II. I learned about it from another forum member who recommended it in a different thread.  Another option is: Pelland Enterprises - (part # H109-376). I ordered both products to compare, but have yet to receive the Pelland product. 

 

 

[Olive2Roam]

28 minutes ago, Dean and Mary said:

 

Steele Rubber Products sells window molding weather strip (part # 70-4500-257), and it worked perfectly on my 2022 Oliver Elite II. I learned about it from another forum member who recommended it in a different thread.  Another option is: Pelland Enterprises - (part # H109-376). I ordered both products to compare, but have yet to receive the Pelland product. 

 

 

That’s great information. Thanks for sharing. I will check out the Steele product. I would be curious about the Pelland as well. Let us know how that works out. 
 

Thanks again!

Edited yesterday at 03:51 PM by Olive2Roam

[jd1923]

3 hours ago, Olive2Roam said:

Does anybody have a supplier for the weatherstripping that goes around the windows in a 2024?

Not certain re 2024, but this is what I purchased for the rubber surround on the window half that opens, as pictured.

https://www.pellandent.com/Half-Inch-Glass-Vinyl-Seal

Edited yesterday at 06:02 PM by jd1923

[Olive2Roam]

51 minutes ago, jd1923 said:

Not certain re 2024, but this is what I purchased for the rubber surround on the window half that opens, as pictured.

https://www.pellandent.com/Half-Inch-Glass-Vinyl-Seal

 Looks like it would work in the 2024. Did they have white available? I didn't see a color sector.

Edited 23 hours ago by Olive2Roam

[jd1923]

37 minutes ago, Olive2Roam said:

 Looks like it would work in the 2024. Did they have white available? I didn't see a color sector.

Bob, I believe Mike was the first to switch to BLACK and he convinced me a couple years ago when I replaced ours. See what my white ones looked like! And on your hull, only 2 years old, they need replacing? The windows look black, the thin rubber on the stationery window is black and over time the black will still look new. Mold stains the white and you cannot see it on black. They may not supply white anymore due to this issue.

Actually, the window frames look more balanced left to right with the black moldings (pic1).

BTW, to be sure for your hull, remove one edge to see if the profile of the rubber looks identical (pic2).

Edited 23 hours ago by jd1923

[Dean and Mary]

Oliver2Roam, 

I’ll let you know when the Pelland product arrives. After posting my first response, I called Pelland Enterprise and was told the window seal is still on backorder, but they expect it to ship in about 2–3 weeks.

Dean

[jd1923]

Dup post deleted.

Edited 23 hours ago by jd1923

[Snackchaser]

6 hours ago, Olive2Roam said:

That stuff is nearly impossible to get clean

We had that same problem until we tried a product called 30 Seconds Outdoor Cleaner.  My wife uses it to off clean mildew on the outside of the house.  I tried it on our hopelessly stained white window weatherstripping and after a 30 second soak they looked new.  Perhaps it doesn't work on all stains, but it might be worth a try!

30 SECONDS Outdoor Cleaner Concentrate 1 gal Mfr# 1G30SJ - Ace Hardware.pdf

[Olive2Roam]

16 hours ago, jd1923 said:

Bob, I believe Mike was the first to switch to BLACK and he convinced me a couple years ago when I replaced ours. See what my white ones looked like! And on your hull, only 2 years old, they need replacing? The windows look black, the thin rubber on the stationery window is black and over time the black will still look new. Mold stains the white and you cannot see it on black. They may not supply white anymore due to this issue.

Actually, the window frames look more balanced left to right with the black moldings (pic1).

BTW, to be sure for your hull, remove one edge to see if the profile of the rubber looks identical (pic2).

I will for sure check the profile. And your thoughts about black are growing on me. I think I will give that a try to eliminate the need to replace it again 2 years down the road.

Thanks!

Bob

 

[Olive2Roam]

14 hours ago, Snackchaser said:

We had that same problem until we tried a product called 30 Seconds Outdoor Cleaner.  My wife uses it to off clean mildew on the outside of the house.  I tried it on our hopelessly stained white window weatherstripping and after a 30 second soak they looked new.  Perhaps it doesn't work on all stains, but it might be worth a try!

30 SECONDS Outdoor Cleaner Concentrate 1 gal Mfr# 1G30SJ - Ace Hardware.pdf 939.75 kB · 4 downloads

Thanks for the link for that cleaner. If I don't swap the weather stripping out for black, I will definitely check out this product. 

Bob

[Olive2Roam]

Nasty. 

Edited 3 hours ago by Olive2Roam

[jd1923]

5 hours ago, Olive2Roam said:

I will for sure check the profile. And your thoughts about black are growing on me. I think I will give that a try to eliminate the need to replace it again 2 years down the road. Thanks! Bob

Profile looks the same to me. Dull width should measure just under 1". Yes yours, living in Nashville, sure got "Nasty" in just 2 years. Our Oliver started life in Florida and then moved SW. In my picture above the white rubber shown is 8 years old.

Caution on installing the new rubber. The ones I removed were all about an inch too short. To compensate for shrinkage on the new ones, I cut them long cramming them into place. I over did it. One piece after a couple of years, the top section had wrinkled and a bottom section had buckled in. I just noticed it last trip when monsoon rains caused a leak in that window alone. I recently ordered 5 ft more to redo that one window, thinking the AZ sun has deformed that piece as-is.

Cut them long enough to fully fit pressing in firmly, but don't overdo it like I did. If it feels too long, you can always trim them shorter, but of course you don't want to cut a piece too short. I used a hose cutter as shown above.

Didn't know about the back-order. My order is now two weeks old. They confirmed it by email, stating they would send a 2nd email when the order was processed and have not received that yet. I emailed them yesterday. No reply as of yet.

Edited 59 minutes ago by jd1923