Cleaning RV weep holes on your Oliver.

[Katjo]

Great video by Chris Scarff!
This is so helpful and definitely put on my maintenance checklist. 
 

 

[Mike and Carol]

Great video, Chris!

When I clean my windows and take out the rubber and plastic parts they go straight into a bucket of soapy water (Dawn) to soak while I’m cleaning the tracks.  Makes it a bit easier to get the grime off of them.  I usually treat them with some 303 and let it dry good before reinstalling.

I did replace my exterior lights a few years ago.  I got tired of the black streaks and the gaskets were getting old and deteriorating.  I found some on Amazon that are about the same form factor but are all metal, not plastic.  I had to make my own gaskets, ordered some thin rubber and used the lights to trace the shape.  No black streaks anymore and the lights work just as well if not better.

RV Lights on Amazon

[Katjo]

Dawn dish soap is great for getting the rubber clean! Thanks for the tip on the light, I hate those black streaks! 

[GrayGhost]

Does anyone know if the little plugs that he shows in the top holes are available anywhere?…. Most of mine are missing. ..

[topgun2]

25 minutes ago, GrayGhost said:

Does anyone know if the little plugs that he shows in the top holes are available anywhere?

I assume that you have contacted Oliver Service?

[GrayGhost]

No, I haven’t… this video reminded me about it and just thought I’d put it out there before I forgot about it again.