Geronimo John
-
Posts
1,412 -
Joined
-
Last visited
-
Days Won
36
Posts posted by Geronimo John
-
-
On 3/1/2024 at 10:40 AM, jd1923 said:
When I needed a short-as-possible 4/0 cable to attach the new shunt, I found the shortest I could buy was 1 foot.
For the negative terminal to the Shunt, many of use 1" copper bus bar. Cheap at Amazon.
-
1
-
-
6 hours ago, Rivernerd said:
Coil springs would be nice.
They would make height adjustments to gain more spring travel a lot easier!
-
1
-
-
9 hours ago, mountainoliver said:
You are at least the fourth Oliver owner to have broken springs
Suggest starting a list of hull numbers, Month & Year MFG, trailer miles, and predominant use type (RV Parks, Boondocking, Off Road).
GJ
-
3
-
-
15 hours ago, HDRider said:
Most of the folks went to Bigfoot (space, dry bath) or Casita (price) if they did not go stick built. I guess a lot of stick built people pull to a spot and stay there for a long time.
And the Stick Built Owners that like to boondock off hard surface roads become Ollie Owners as a result of their stick builts falling apart.
Love my OE2!
GJ
-
2
-
1
-
-
I really like your hard top rain and wind shielding "Guest House". Safe for Alaska and Canada (Generally speaking). And will encourage guests not to stay more than a few days.
Sweet build for sure!
GJ
-
1
-
1
-
-
12 hours ago, John Dorrer said:
Why not have that frozen in the freezer and use frozen water bottles
I pre freeze at the Ranch ten small water bottles. Then put them into the freezer and refrig compartment they aid in the cool down process GREATLY!
GJ
-
2
-
-
12 hours ago, MAX Burner said:
We normally travel with the fridge in the DC mode and a bag of ice in the freezer to accommodate the occasional adult beverage at the end of those long tow-days.
Amen to that!
GJ
-
1
-
1
-
-
Yea I saw that. My slide rule must have needed some grease for that calculation!
🙂
GJ
-
1
-
2
-
1
-
-
On 6/19/2023 at 4:05 PM, RoadKingsofGA said:
True, we could put a long chain out to the dish stand and put a lock thru the foot of it, should we have to place it far away.
Personally I prefer Art's (MaxBurner) security plan:
+
+
+
+
+
+
+
+
ARFF WOFFFF Chomp. Problem gone.
🙂
GJ
-
1
-
2
-
-
If you have children or curious pets, an oil filled space heater is much safer to wandering hands or tongues. But they do weigh a bunch more than the typical 2 pound space heaters sole at Walmart.
GJ
-
1
-
-
More than a few of us, myself included, have found that our trailers look just fine with the
eightFOUR center hub caps and their supporting "Cones ???" removed. This is especially true of owners that routinely shoot their hubs with an IR temperature sensor. With the cones and caps installed, it is difficult to get a good bearing/hub temperature readings. This is the topic of several members here on the forum.GJ
-
1
-
1
-
-
Progressive Dynamics PD4045 LiCSV Upgrade.docxProgressive Dynamics PD4045 LiCSV Upgrade.docx
40 minutes ago, ADKCamper said:Our plan is to wait until our existing AGM batteries need to be replaced, when we will change to lithium batteries and replace the converter with a lithium-capable one.
Some of the 2018 OE2's PD Converters have a LI switch that allows use with Litho's. Below is a picture of the LI/LA switch and a hard copy of John Davies procedure to upgrade the PD if you don't have the switch as well.
-
1
-
3
-
-
You are correct.
However fiberglass has the advantage of being cast in many ways. From many perspectives we would want the top mold to be very aero efficient. But the bottom could be squared off some with much less impact from an aero perspective. This is exactly what most vehicle shapes at the rear are. Squarish low for trunk space and aero above for efficiency. The auto mfg's figured out how to do this with sheet metal, and the boat mfg's are doing it in fiberglass.
That said, I'm not suggesting Ollie bottom be a cube. Just moderate it a bit to square up a tad the sleeping corners. Just a that.
GJ
-
4
-
-
13 hours ago, mossemi said:
Are you having trouble receiving Bluetooth signals from your 712?
No, it works great, just not to the TV. Weak signal as we all know.
My Ollie not in Hawaii, so I am at a disadvantage of not being able to run out and take a peek. But I do not recall seeing a 4-wire flat style connection on our Victron Orion 12/12 DC to DC unit. Hence, it appears the only way will be to connect the to the 712 Smart Display.
13 hours ago, mossemi said:I have seen references to the Smart Dongle and the Smart Shunt connected together, but I don’t have either product, so no first hand experience.
I have as well, but from downloaded pictures from the web, our 712 Shunt does not have a connection for a 4 wire flat style Dongle plug. It has a RG45, and a NO, a NC, and a Common port. Hence the only option I can research find is to the 712 display.
JPR
-
2
-
-
On 2/21/2024 at 2:53 PM, jd1923 said:
I don't see that you would need to run it to the propane tanks. Just connect it to your charger under the dinette and it should work.
From the Victron 712 Smart manual, below are the connections. I assume that the VE.Direct (Terminal I) is where I could plug in the dongle which appears to also have a 4 wire flat "VE Direct" connector.
Being higher in the trailer than below the dinette seat (Where my Victron Orion 12/12-30 resides, it would seem that the 712 monitor would be a more optimal location.... "Higher is better than closer" info from JD1923.
Sadly the 712 monitor is installed in the fiberglass and rotation is not an option.
37 minutes ago, mossemi said:It will never transmit an omnidirectional signal so it is probably possible to increase its transmitter range by changing its orientation.
-
1
-
-
Thank you for "The Rest of the Story"! It is a great team at OTT, one I call "World Class".
Keep up the great work,
Geronimo John
-
5
-
1
-
-
The tanks are only ones that were used in the propane exchange program. If our tanks in our trailers have not been exchanged, this is a non issue.
Below if from the CPC.
GJ
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Recall Details
Description:This recall involves EVAS 20 lb. propane exchange cylinders with model number EVAS – M0859, a serial number beginning with a “W,” and a date code of either “06-23” or “07-23.” The model number, serial number, and date code are stamped on the collar of the cylinder. While the cylinders were initially sold with an AmeriGas label, consumers could have exchanged these cylinders with other propane distributors who would have then placed their own branded sleeve/label on them.
Remedy:Consumers should stop using the recalled EVAS 20 lb. propane cylinders immediately, close the top valve completely and return them to any AmeriGas Propane Exchange retail location for a free replacement. Consumers can find exchange retail locations at https://www.amerigas.com/locations/find-propane. Worthington advises consumers to close the valve on top of the cylinder completely when returning them.
-
2
-
3
-
-
On 2/22/2024 at 4:13 PM, jd1923 said:
Why did they have to round the mold at the foot/rear of the bed? This area could bulge out a little, for those of us lengthy and well north of 200 LBS.
AMEN!!!!!! Got my vote for a mold mod. Hopefully it does not cost over a million dollars! 🙂
-
2
-
-
On 2/23/2024 at 8:29 AM, mossemi said:
Bluetooth radio
Mike:
What's a BLuetooth Radio?
Were you using a dongle or just the 712 Smart (Shunt and Display Combo)?
If not using a dongle, does the 712 Smart System broadcast the Bluetooth "signal" from the shunt or the display?
Thanks, I really don't know much about how these type of systems really work.
GJ
-
1
-
-
The picture was snipped from the Oliver Operations Mgr stating they had just finished loading out the first shipment to a dealership.
This one:
From his and your statements, and this video, it is apparent that the trailers likely were wrapped while on the truck bed.
That has good and bad considerations. The good is a pretty picture of our beautiful OTT machine. One of the bads is pondering how much of a PITA it must have been to wrap these trailers with them on the truck bed hopefully using ladders and fall safety equipment.
Maybe a smarter "consideration" would be to have the video show a shot of the the beautifully prepared OE2 being wrapped under cover at the factory. That's how the vast majority of shrink wrapping is done in the industry... not being done outside in an elevated position obviously working from ladders....
Or maybe ship them with a nice tight fitting cover instead of shrink wrap. Even better would be having the cover printed with huge letters "Oliver Travel Trailers. 🙂
GJ
-
1
-
-
On 2/24/2024 at 5:51 AM, Hokieman said:
All I have done is cut two 2” holes in the sides of the battery box. I’ve noticed it is cooler inside the battery box on very hot days with the street side in the sun.
I would love to see pic's of that. One low and one high would facilitate natural convection.
GJ
-
3
-
-
On 2/21/2024 at 2:53 PM, jd1923 said:
I don't see that you would need to run it to the propane tanks. Just connect it to your charger under the dinette and it should work. A taller location is better than low and closer
Using the "Any Victron device that has the word "Smart" in it's name has Bluetooth connectivity" may open up another option. Can we combine my having the Victron 712 Smart Shunt in the battery box and your "Higher is better than closer" concepts?
What if I connect the dongle to the shunt and run its five feet of cable up to the upper cabinets of the street side. Then extend the dongle forward until I run out of cable. At that location, stick the dongle to the ceiling of the cabinet. Much higher than under the dinette location, and not much further back.
Your thoughts?
GJ
-
3
-
-
On 2/23/2024 at 3:02 AM, MAX Burner said:
Hey, @Geronimo John - as I recall, your Victron DC/DC charger is under your FWD Dinette Seat... That may be close enough to monitor your Victron APP from the TV Cab.
Correct on location. I can pick it up just outside Ollie, but at 10' I lose the Victron Connect signal. Hence the need for an extender.
On 2/23/2024 at 3:02 AM, MAX Burner said:Our model of Victron Orion Smart DC/DC charger only has BT and not a VE Direct connection for a Dongle.
From today's reading, I have learned that any Victron device that has the word "Smart" in it's name has Bluetooth connectivity. This would seem to imply that it should not be necessary to upgrade to the Cerbo or other computer based systems unless there are other features you want to have.
Is this thinking logical?
GJ
-
2
-
-
With the tremendous effort that OTT expends in their make ready process, I'm surprised that they don't "Shrink Wrap" their trailers for transport.
GJ
-
3
-
Problem with city water connection
in Mechanical & Technical Tips
Posted
A bolt head of the right size is a suitable substitute for a very large Allen Wrench.
GJ