Jump to content

topgun2

Moderators
  • Posts

    7,496
  • Joined

  • Last visited

  • Days Won

    449

Everything posted by topgun2

  1. Welcome and have a good time reading! Don't forget to go over to YouTube and view Ron Merritt's Oliver video. It's fairly long but is well done. Finally, don't be afraid to ask questions. Bill
  2. Do you think they might get upset if one would ask to "pick" their nose cone?
  3. This IS great news! I've been wanting to meet trumpetguy - looking forward to it. This now makes 4 of us? Bill
  4. Gary and Jona, Thanks! It should be fun meeting you and seeing what others have done with their eggs. And, where else can you "go to Helen back" by only traveling 30 or so miles This will be my first eggsperience. Bill
  5. OK, make that another Oliver Legacy Elite II joining this EGG crate. Site A-28. Bill
  6. Mike and Carol, I got the surge protector on Twist at delivery. Since it is directly wired into Twist I do not even notice it and no longer worry or have to test before I plug in at campsites. - this really is a good thing particularly if it is raining or dark and I know that the relatively expensive electronic equipment inside Twist is protected. However, on the downside, there is a panel that constantly gives a readout on the status of the surge protector and the electricity that is coming into the Ollie. Unfortunately, this panel is located under the street side bed. Obviously, this means that in order to see what the panel is telling you, one has to list that bed, lift the hatch cover, and then read the code that the panel is showing. I prepared a card that indicates the "fault codes" with relatively large type (so I didn't need my glasses and/or so it was easy to read in low light) and taped it next to that panel. However, in the event of the surge protector having to do its "real" job, I still have to lift that bed and hatch to figure out what is going on. In time, if I ever figure out a better place to put that panel, I'll simply move it. But, for now, it is OK where it is. Bill
  7. Welcome! Tell me that you are not going to name your new Ollie "Great Scott"! June should be a wonderful time to take a nice drive on the Parkway. The Davidson River Campground near Brevard, NC is a decent one with reasonable restaurants, a Walmart, and a fairly good grocery store (BI-LO) nearby. There are also several waterfalls near. Bill
  8. B & C Have a good trip in both directions. The folks at Oliver are great. Safe travels. Bill
  9. Mountainborn - Thanks for the link! We too had difficulty finding that puppy. If it had not been for the great assistance of Mrs. Commanche we'd still be looking for it. Even though I now know where it is, I put three signs showing me the way - one on the outside of the compartment under the bed, and two inside placed so that when you look into that array of pipes and duct work it is fairly easy to just follow the arrows. Bill
  10. I just knew that someone was going to ask for those measurements - sorry, but I don't remember nor did I write them down. However, I do remember that the cut-out for the drain was 4 x 4 inches. And I remember that the indentation for the curved wall beneath the sink was smaller than I had expected. Also, I forgot to allow for the thickness of the carpet on the first round of cuts. The idea of the dritek is a good one except for the fact that I would have to buy the dritek and the scrap plywood and carpet were "free". I'm guessing that the dritek would do a good job of keeping the carpet from slipping. However, due to height restrictions I'm guessing that I would have had to remove the dritek when showering. Bill
  11. The only thing that I changed on the "stock" screen door was the addition of the silver and black bar located above the normal screen door latch. Yes, the sliding clear plastic panel is still there but is very difficult to see in that picture. With regards to the "round thing" just above the black screen door latch - this is a relatively new addition to most of the RV screen doors that I've seen. By simply pushing this round object down, it pushes the black screen door latch down to open the screen door. Thus, it saves one from having to slide open the clear panel first before gaining access to the black screen door latch. I think that these can be ordered separately to upgrade an existing screen door and would simply replace the entire sliding panel. The bar that I installed really helps on windy days giving you something to hold on to while you open the screen door so that the screen door does not "fly" open and bang into whatever it hits first. The bar also helps with closing the screen door when entering the camper. As with a fair amount of things these days, I bought mine on Amazon. But, they are also available at Camping World and a number of other RV outlets. Bill
  12. Yes, I will have to take the carpet out when I use the shower - just thought that I'd set it right by the door. The piece of scrap plywood I had actually measured right at 5/8 inch. The height in that area is compromised, particularly so since I'm right at 6 feet tall. But, getting to the toilet is not a problem and using the sink does not seem to be a problem with regards to height. I did test the "foam" flooring, but I'd also have to take that out when showering (mainly due to little drainage underneath) and it didn't feel as good on the toes. I also briefly used a carpet directly on the shower floor. This is certainly a simpler approach, allows for washing and/or "shaking out" and does not impact the height issues. Unfortunately I do not like the carpets that have the latex backing and others that I tried had a tendency to slip when stepping over the threshold in or out of the bath area. Bill
  13. donthompson, I've still not had a chance to try the Bluetooth side of things but I'm guessing that it will work as you say. However, using Bluetooth means that you have to have another "machine". Perhaps I'm a bit old fashion and my mind seems to be only be able to handle one thing at a time. I say, "stick a USB stick in the hole and let it play". That way I do not have to even think about turning on the tablet, getting the music app up, picking the right songs or playlist, and making sure that the tablet is "paired" with the Furrion. But, given the limitations of the Furrion, as noted above, it looks like Bluetooth or multiple memory sticks (assuming that you want over 2gb of differing styles of music) are the two ways to go. Bill
  14. Thanks for looking for me - I've been a bit busy since I took delivery of Twist back in mid-February so I have not had a chance to look at this. Bill
  15. I thought that there were a couple of "problems" with the floor in the bath. First, given that it is white, it will eventually get dirty from simple foot traffic and I'm guessing that over time this will be harder and harder to keep clean. Second, for those trips in the middle of the night, the floor is a bit cold on the toes. And, third, even if the floor is "dried" after a shower there is still a bit of moisture that lingers for awhile. So, with a piece of scrap plywood and left over carpet, a new removable floor was constructed. Note that the side nearest the sink has a slight curve to it and I cut out the area around the drain. I also bought eight 3/4 inch vinyl feet to attach to the bottom so that air can circulate beneath the removable floor to insure complete drying. When cutting the plywood make sure that you leave enough room for the thickness of the carpet around the edges. The carpet can simply be stapled to the bottom of the plywood and then using a hot melt glue gun, the edges of the carpet can be sealed so that they do not ravel.
  16. I know that most have already seen this mod, but, here it is on Twist. The only change that I made to the instructions that were included with the bar was to go to one size smaller drill bit. After drilling a "test" hole I thought that the bit in the instructions was a little too large. This caused a better chance of stripping the screws since they are placed into the very thin aluminum of the screen door (I believe that it was suggested to use a 1/8 inch bit but I used a 7/64). The total time for the install was less than 15 minutes and since it was a windy day today I got the chance to test it out right away - it works! On the down side, I can see the possibility of someone using this bar for support when getting in or out of the camper. Neither the bar nor the screen door are really designed to hold virtually any weight. Therefore, remind people to still use the grab handles on the other side of the door. Bill
  17. Just for the record - here is what this puppy looks like. Bill
  18. Nope - all the files I used in the various tests on the Furrion were MP3's. Thanks for trying though. Bill
  19. Stan, As you know, I've not had Twist very long. However, I've already tried a number of things mounted with suction cups and they all failed. I really like the "Command" brand of tape by 3M in that you can remove it. And, of course, the 3M regular double sided stuff is great for heavier duty applications. Of course you could always just ask Gunner to hold it in place for you! Bill
  20. Juniorbirdman, Nicely done aren't they. Nothing like having a set of protected buttons! Bill
  21. Sherry and Stan (and Carol), Not only are those buttons protected but I do like the look. Not only the outside edge of the guard is polished, but, inside the holes made for the buttons is polished. I understand from the owner of RV Widget Works that he was able to polish the inside of those holes due to the fact that they are cut with a laser. I have no vested interest in this company, but, I do like the product and I like the way they do business. Bill
  22. Mike & Carol, I really like the design - nice job! Bill
  23. Dave & Cindy, Like a few of us on the Forum, I've been in that camper. Just know that it is so nice that it caused many of us to actually purchase an Oliver. You've certainly got a good one (like there is anything else). Welcome! Bill
  24. Over on the Fiberglass RV Forum I read a post about several products made by a company called RV Widget Works. One of their products is used to prevent you from accidently pressing one or more of the buttons on the Dometic Fridge. Since I had this happen to me on my last camper which resulted in having to throw away most of the food in my fridge, I thought that I'd take a look at this. On the website - rvwidgetworks.com, they say that this guard is made for the Dometic model RM2454. I emailed the owner - Charlie Young - and he replied that the only difference between the Oliver fridge and the model RM2454 is that the Oliver's is a bigger model, therefore, the guard should work. Mr. Young sent the guard to me with a note telling me to try it and if I didn't like it or if it didn't fit, just send it back - no charge. If I did keep it the cost including shipping is $16.75. Well, I did decide to keep it. The fit is perfect, even the edges are polished, and it is held on with clear 3M tape. I can't imagine how I now could accidently hit one of those buttons. Given that the guard is nothing but a piece of plastic with four holes drilled in it, the cost is fairly expensive. But, compared to the cost of the food I had to throw out and for the peace of mind of not having to even think about it, I feel that the price is fair. Bill
  25. Horace and Dianne, et.al. The mystery is solved (perhaps). Today I took a LEXAR 16gb memory stick and tried it in the Furrion radio. First, the stick had 11gb of music arranged in folders by artist and then by album. As with previous experience the Furrion would seem to try to load this music but would not either play it nor show anything but the total number of songs on the screen. Then I took the same stick with basically the same songs (a total of 10.8 gb) but arranged without folders - just one song after another. This time the Furrion started playing the first song and listed all songs on the TV. Using the TV remote, I could then scroll down through the list of songs and play any to include the very last one. So, it seems that the personnel at Furrion are both right and wrong - if one simply lists songs one after another the USB player will work with data amounts greater than 2gb, but, if one wishes to have data amounts greater than 2gb divided into various folders, the USB player can not handle it. Unfortunately for me I like various kinds of music depending on my mood. So, instead of having one memory stick with several folders for jazz, classical, pop, country, Celtic or new age, I will need to get several 2gb sticks and split things up. Also, for audio books this same problem arises. Bill
×
×
  • Create New...