Jump to content

Brian and Brandelyne

Members
  • Posts

    146
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Brian and Brandelyne

  1. John - I have looked closely at this Isotherm for the last six months and have never seen/heard of this item. It sounds like a nice product and I am interested but not sure of what level of integration I am willing to endure for a brand-new trailer (in March). Thanks for the share, very interesting. Brian
  2. @SeaDawg Too funny, every time you mentioned the “truck fridge” I was thinking you had an Isotherm in the back of your TV as an additional fridge like I have a Truma in my truck. Never would have guessed you had a truck fridge in the Ollie. Looks good - I like the drawer but I also like the additional height of the Cruise 130 with the interior drawer. Brian
  3. @John E Davies I don’t think the newer compressor fridges are going to draw that much. @SeaDawg has two AGM batteries and does just fine with the compressor. I run a Truma fridge in the back of my truck and it is powered by a second battery that is approximately 650aH (it is a 750 CCA) that gets charged by the alternators. I run that thing 24/7 on trips and it has never run the battery down. Take a look at the specs for the Isotherm Cruise 130 just for reference. Brian
  4. I was told this upgrade was scrapped and they are staying with the fiber-granite. It was a bit disappointing to me as I was told about it when we first started looking and then they changed the story after our deposit. Not that this would move the needle but when you look forward to something different it is kind of a let down. Brian
  5. @John E Davies The new fridge is the Isotherm 130 (99% sure of that). It is spacious but like people said, the freezer is smaller yet it still advertises 2 liters for the freezer. You asked about the Furnace (Truma), I can tell you it is MUCH quieter than either a Suburban or Dometic. The air flow is fantastic, warms up quickly. It is NOT the combi unit, it is the Vario-Heat. Truma spec’d it out with their own ducting too. The furnace, A/C and hot water heater (Truma Aqua-Go) all run on the same control panel, the CP Plus. Here are some pictures from my last visit to the factory. The first shows the Truma Furnace, Vario-heat, second shows Truma duct work, third is inside of the Isotherm and last is the Isotherm exterior. Brian
  6. @Patriot great solution, we love ANKER products and we didn’t realize that the outlets were all on the ceiling in the newer models. Most of my opinions on that have already been expressed here so I won’t re-hash them. This one is more expensive but I really like that it indicates your grounding status. Very nice install - thanks for the share. You cannot see it in the first pic but it does have AC outlets on the back of the device. Cheers, Brian
  7. Patriot, No worries and thanks for the clarification on the headlights. I have a list of all TSB’s and Recalls for my truck so I was aware. - Tailgate, cameras, and some sort of heat shield under the truck. All taken care of. As for the price, it is a GREAT price. Also, NO TAX when shipped out of state and I got a Black Friday special where the paid shipping! I did it myself, there are two really good videos on you tube about the install. One is a Master Ford Technician and the other is linked at the bottom of Levittown Ford site. They say it can be done in 3 hours but it took me close to 5 because I have to stop, read, think, re-read, think some more - gather tools etc. Between the instructions and the videos, your really cannot mess it up. This is all providing you have the dual battery set up which I am sure you do on a 350. The local dealer told me it would be between $600 and $800 to install because they had never done one. BL
  8. It has had several recalls but that wasn’t one of them. I have found it is less of an issue since I installed the Firestone airbags. I have a camper shell on the back and a Bedslide. Those two alone were enough to change the geometry on my truck and raise the front end slightly. It got worse when I loaded down for travel and then hitched up. I now inflate my airbags to give me the “Stock Height” from my tailgate to the ground. That seems to do the trick. Another thing Ford owners do is change settings using a program called FORSCAN and invoke what is called “Bambi Mode”. On a stock Ford truck the fog lights will switch OFF when you turn on the high beams. Bambi mode allows the fog lights to stay on with high beams. They are called fog lights even though they are white and LED so they are still quite bright but they have a dispersed pattern. Brian
  9. I agree - highly recommend…I will have to send you a picture of recent front end work on my F-250. Have you heard about the collaboration between Warn and Ford to create the “kit” to install the 12k pound winch? It looks incredible! @PatriotAdding Link: https://www.levittownfordparts.com/sku/m-1821-sd.html BL
  10. After changing bulbs in Chevy’s, Toyota, Lexus I made it a point to order ALL LED bulbs on my 2020 Ford - have not been disappointed but no matter what I do in terms of keeping the truck level (Air Bags in back, etc) my low beams seem to be too bright for many oncoming cars. It is mainly the cars that are low to the ground, trucks don’t seem to mind. I have to say they are the clearest, brightest lights I have ever had - including some off road lights. Good luck to all the bulb-changers out there. It is not a fun, or easy task. Cheers, BL
  11. Thank you for that update, I missed that one. Although I must say, I don’t like it, it doesn’t make clear sense. A debate for another thread. BL
  12. I apologize, I am not familiar with that term. You have very little (no) information on your profile that would give me additional information about your location, rig, TV, etc…. Please elaborate. BL
  13. “2022 LE II Tail #22-1052” Patrick “Wolfpack”, do I detect a former, and fellow, Airman here? Love the tail number, I may steal the concept - we are waiting on Tail #23-1351 to roll out of the hangar sometime in early March. I was aircrew on AWACS and Joint STARS now retired (21 years) and looking forward to some serious down time. Still need to shake these pesky second and third career moves. Looking forward to pulling the plug in May of this year though. Re the phone…my Apple Watch has tried to “save me” a few times out on the mountain bike trails but, to its credit, I had taken a tumble but needed no assistance. Hope to see you guys at the rally in May. Brian
  14. Bet it was - I am SO looking forward to having a 30 amp cord. I had a 30’ 50 amp cord on the Airstream and I can remember several occasions coming out to disconnect for an early launch in single digit temps. That cord would freeze solid and did not want to curl up, not to mention how heavy it was! It would go in the back of the truck for that leg. Happy to see you put this in writing, I was wondering if I was the only one thinking this. You can either get a longer replacement cord or get an extension cord but they are not interchangeable. Always good discussions here! Brian
  15. There just might be something in the works... BL
  16. I got my Part 107 license a few years ago. I really enjoyed the study material as I have a background in Air Force aviation and it brought back many memories. You only really need it IF you are going to use the UAS (unmanned aerial system) to make money e.g. Commercial UAS Pilot License (Part 107). Otherwise, it’s kind of like having a 2 5/16” hitch, you might not really need it but it has a “cool factor” with it. Fly Safe, Brian
  17. After I posted this I contacted my sales rep. Within an hour he replied with our Hull # (1351) and a build sheet with our VIN. We had seen the same thing on the registration form. We will now be able to register as owners! Cheers, Brian
  18. @chiwald Nice looking rig! We will be all white with a Ford as well. Not scheduled to pick up until 3/8/23. Where are you from? (Might want to update sig block) — I assume that decal is from Etsy? We have been looking at similar decals but yours is the best we have seen so far. B&B
  19. @Steve and Deb your profile says Hull #1360; has Oliver provided you with a Hull number already? Our delivery is set to be 3/8/23 and we have not heard a thing on that front. Brian
  20. Very good points and I am familiar with the Ocean Air shades having just sold our Airstream. Maybe the combination of the Ocean Air shade and the tinted window would provide the 99% solution. It’s great to have this dialog and have some options to consider. Thank you all! Brian
  21. This mod looks great. I am currently looking into this as one of our first mods when we take delivery. A few weeks ago I was in an RV dealer looking through their parts department and they had a very nice Lippert display. The Oliver doors are made by Lippert. Has anyone tried the Lippert “Thin Shade” mod or compared it to this one? I looks really nice and gives you a much better view through the window. https://store.lci1.com/thin-shade-complete-window-kit-for-rv-entry-doors-806621 Let me know what you think. Brian
  22. Parks on the Air (POTA) is one of our favorite activities. I got my New Year’s day contacts yesterday and then some! My wife and I are discussing an “Activation” of the Lake Guntersville State Park (K-1044) during the rally. I will likely bring my FT-991A and a Chameleon vertical antenna and setup somewhere in the campground but we can discuss options. 73 de AF1US Brian
  23. I have used CB on the trails in CO, GMRS is becoming the de facto standard as they are easier to use and you can get hand-helds just about anywhere. I am also a licensed amateur (ham) operator and fully endorse getting a license if you plan to use GMRS. The use of the spectrum is gauged by how many people get licensed, not by how many people use it and that spectrum can be auctioned off making the service and all the radios go away. I mostly use VHF/UHF (2 meter and 70 cm) while mobile but carry an HF and antenna to communicate long-range while camping. There is an activity in the ham world called POTA (Parks on the Air) where people take radios to state and national parks and monuments and set up radios. Others call in and “log the park”. This does several things. It gives you a good idea of how far you can talk on your radio, what conditions are like that day and it generates a tremendous amount of interest in radio. The annual Oliver rally is held at a State Park! Does anyone ever talk radios/communications at the Rally? Would anyone be interested in a CB/GMRS/FRS/MURS/HAM discussion/demonstration?? I think this would be a great topic. Especially for those looking to caravan up to Canada (different rules) and Alaska. My Amateur Callsign is AF1US (Air Force 1 United States) - see you on the radio. Brian
  24. We just visited the factory at Hohenwald to take some measurements and pictures. We live about 90 minutes away so it is easy to do. While we were there, one of the techs mentioned Truma had issued a service bulletin on the screws originally sent with the air conditioner units and advised Oliver to not use them. Truma sent new screws to use for installation of the a/c units to prevent leaks. You might want to have a conversation with them to determine if the additional caulking was the appropriate corrective action or if something else needs to be performed to prevent leaks down the road. Brian
  25. That is true on the plant tour but not the showroom. I don’t disagree with the policy. Not everyone wants to be posted all over the internet just because they were doing their job. Also, corporate espionage is a real thing. Proprietary techniques and processes should be kept private. We spent over an hour in the LE II outside, the showroom was empty due to the company Christmas party, we tried out the Truma furnace and ran many other systems completely unplugged. The Truma did not disappoint. We got all the measurements and pictures we wanted from a true 2023 model. Brian
×
×
  • Create New...