Ken_Judy Posted October 17, 2023 Share Posted October 17, 2023 Hi All, My backup camera stopped working and the head unit cannot connect wirelessly even if it is within inches of the camera. Of course the power is on to the camera. My question is has anyone had this problem and how do i check if power is getting to the camera. Also, on my 2018 Hull #381 there doesn't seem to be a 12v fuse labled backup camera and the schematic doesn't show which one it would be. I just thought I would ask here before tearing into everything. Thanks Link to comment Share on other sites More sharing options...
Steph and Dud B Posted October 17, 2023 Share Posted October 17, 2023 If you have the Furrion camera there's a blue LED on the camera when it has power. Stephanie and Dudley from CT. 2022 LE2, Hull #1150: Eggcelsior. Tow vehicle: 2016 GMC Sierra 6.0 gas dually 4x4. Our Oliver journey: Steph and Dud B's RV Screed Where we've been RVing since 1999: Link to comment Share on other sites More sharing options...
Moderators topgun2 Posted October 17, 2023 Moderators Share Posted October 17, 2023 Try this - turn the power off for both the monitor and the camera. Assuming that you have verified that the camera is receiving power - turn it back on while looking at the monitor, turn it back on - does it give instructions as to "re-pairing" it with the camera? If yes, then do what it says. Good luck! Bill 3 2023 Ford F150 Lariat 3.5EB FX4 Max Towing, Max Payload, 2016 Oliver Elite II - Hull #117 "Twist" Near Asheville, NC Link to comment Share on other sites More sharing options...
Moderator+ ScubaRx Posted October 18, 2023 Moderator+ Share Posted October 18, 2023 On 10/16/2023 at 8:08 PM, Ken_Judy said: Hi All, My backup camera stopped working and the head unit cannot connect wirelessly even if it is within inches of the camera. Of course the power is on to the camera. My question is has anyone had this problem and how do i check if power is getting to the camera. Also, on my 2018 Hull #381 there doesn't seem to be a 12v fuse labled backup camera and the schematic doesn't show which one it would be. I just thought I would ask here before tearing into everything. Thanks You did not say which camera is installed on your trailer. IF there is a fuse it will be an inline one in the power cord hidden behind the white reflectix insulation glued inside the attic cabinet. You'll have to pull it all down to find it. Put it back into place using spray contact cement. Use of this will probably set off your propane detector. 4 Steve, Tali and our dog Rocky plus our beloved Storm, Maggie, Lucy and Reacher (all waiting at the Rainbow Bridge) 2008 Legacy Elite I - Outlaw Oliver, Hull #026 | 2014 Legacy Elite II - Outlaw Oliver, Hull #050 | 2022 Silverado High Country 3500HD SRW Diesel 4x4 Link to comment Share on other sites More sharing options...
Ken_Judy Posted October 19, 2023 Author Share Posted October 19, 2023 Thanks for the replies. Next time I go out to my storage place I will investigate further. Link to comment Share on other sites More sharing options...
Geronimo John Posted October 20, 2023 Share Posted October 20, 2023 Had the same problem. Seems that tree branch ate my Furrion rear camera antenna. Worth a glance. GJ 2 TV: 2019 F-150 SuperCrew Lariat, 3.5L EcoBoost, Max Tow, FX-4, Rear Locker OLLIE: 2018 OE2 Hull 342, Twin Bed. OLLIE DIY’s: Timken Bearings, BB LiFePO4's, Victron 712 Smart, 350 Amp Master Switch, Houghton 3400, Victron Orion DC - DC, 3000-Watt Renogy Inverter, P.D. 60-amp Converter, Frig Dual Exhaust Fans, Kitchen Drawer Straps. TV DIY’s: 2 5/16" Anderson System, Nitto recon’s, Firestone Rear Air Bags, Bilstein 5100’s, Mud Flaps & Weather Tech all, installed Ham Radio (WH6JPR). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now