rideadeuce

I think this has got to be the best $5 mod that you can do!

It is very easy to set-up and take down. The 16 ft pole is fiberglass and breaks down into 4 pieces.

Used the Flag pole setup this past weekend and it worked great! Got it here: http://www.flagpolebuddy.com

Great job!

Some cool add-ons: https://www.seasucker.com/collections/all-products/products/talon https://www.seasucker.com/collections/all-products/products/paper-towel-holder https://www.seasucker.com/collections/all-products/products/waste-band-small-black http://www.flagpolebuddy.com/suction-mount.html

I agree with you. The only drawback left is not being able to access nightstand drawer without removing it. If I could find an alternate mounting location and a good secure stowing mount for table while in tow I would be pleased. This is the one I got: Compass Rose Folding Table Top - 26.8" x 23.6" w/ 29.5 inch leg (ordered separately)

Yes, but there are several options if you go to the website: https://www.rv-table-mount.com/

This is where I ordered the longer post and folding table: https://www.rv-table-mount.com

Sorry, been camping in the Oliver. Not sure what happened to original post but here are some pics. I will post link to original manufacturer. I ordered the longer post and cut off about 2 in. and also screwed a 1" x 3" aluminum piece to keep it from going all the way down and hitting gelcoat. Last picture is after a couple coats of teak oil on the table. Also, I don't seem to be getting my email/responses. Mike

After 300 mile trip through post-winter pot holes and I-65 road work the knives did not budge but I appreciate your feedback. I may end up stowing them during drive.

link: https://www.amazon.com/gp/product/B01JLCHFTQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I haven't used it at altitude yet but from what I understand it is the cold more than the altitude that can really shut it down. But if you use the tri-fuel conversion you can still use gasoline when needed.

Something I learned on one of my plant tours... propane conversion of gas generator. Works great and super easy to install. Link below https://www.motorsnorkel.com

Got the longer post as well and modified slightly so it will swing over night stand out of the way. Works great.

Thanks to previous posts I was able to get perfect runner. Thanks! It is 22"x12' BTW link here: https://www.amazon.com/gp/product/B0796NYT79/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 Entrance Mat 24 x16 https://www.amazon.com/gp/product/B004AR5WXY/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

Had to glue the VHB tape to the wood first then applied to fiberglass... great hold so far. Knives even traveled well without moving.

Hi Jim, This may be a silly question but is there any way to mount 3 in 1 antenna without drilling through hull? And would it be simple enough for me to direct wiring down from top myself. Just wanting your opinion. Thanks, Mike