Jump to content

John and Debbie

Member+
  • Posts

    648
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by John and Debbie

  1. What's the payload ?
  2. Mike, I use a five pound canister for our 30+ year old Coleman two burner stove. I have a short hose about three feet long that works. I have the quick connects front and back on our trailer, but this old stove works fine. I couldn't find a hose that would work with both the quick connects and the old stove, hence our solution to use the small tank. John
  3. "I have had zero problems with exchanging the bad shocks at O'Reilly's (lifetime guarantee...thanks Steve L) but am thinking I'll want to try another brand to see if it lasts a little longer. Still happy campers here... :)" I got a message from Lew at Alcan Springs and he was hoping that RadFlo could be the best choice for a shock, but theirs were about $200 each. I will be bringing four shocks with me of the Bulldog equivalent to the Monroe 555001 if those are available. We will have the five leaf spring replacement done in April. John
  4. We had CGI do ours after owning it for a year. I assumed that since it was only a year old that they would have an easier job. No. The price was the same. Colin said that even on a new trailer, they have to buff out the swirls and imperfections on the gel coat. They did a great job and we have no regrets. We did buy the cleaner and the spray that they sell to extend the ceramic coat. I cleaned it and used the spray a couple months ago. It's been a year since they did it and it looks fantastic. I am nearly 73 so waxing every 6 months as recommended wasn't going to happen. When it needs it again, we will have them do it. John
  5. Contact Lew at Alcan Springs in Grand Junction, Colorado. I have been in contact with him and he has a shock in mind for when we visit him in April for a five spring leaf spring replacement of our current four leaf. John
  6. I do have two red auto ramps. I wonder how hard it would be to hook up using those to get the hitch up that high. It would be easy to use those to unhook though. Maybe reworking the gravel pad to make it more level, just thinking outloud. John
  7. Hi all, I use yellow Camco jack stands and a couple 2×4 pieces on top for a slip surface on all three jack stands. I park the trailer by the garage and there's a slight downwards slope to where that gravel drive meets up with the road. The rear jacks only need to extend a couple inches, but the front jack extends 12 inches out to the jack stand/2×4 pieces to get to level. Is that too far? Obviously, the less travel the better, but when I back the trailer into the spot, one jack stand and one layer of two 2×4 on top are all that will fit while hooked up. John
  8. Congrats from #1290. We have enjoyed ours. It tows so easily. Nice to know there's an Oliver dealer in Denver as our daughter lives there and we could get some service done there while visiting. John
  9. Hi all, I use yellow Camco jack stands and a couple 2×4 pieces on top for a slip surface on all three jack stands. I park the trailer by the garage and there's a slight downwards slope to where that gravel drive meets up with the road. The rear jacks only need to extend a couple inches, but the front jack extends 12 inches out to the jack stand/2×4 pieces to get to level. Is that too far? Obviously, the less travel the better, but when I back the trailer into the spot, one jack stand and one layer of two 2×4 on top are all that will fit while hooked up. John
  10. Did you replace the leaf springs or have them with you in case you do need them? Is there a particular weight rating for the 5-leaf springs from Alcan? I plan to get the 5-leaf springs next April and have the shop in Grand Junction install them. What did you do with the shocks? Lew said he could put better shocks on our Elite II than the Monroe. Our trailer and yours are only one hull number apart. Thanks.
  11. John How do you flush the gray tank? TIA. John
  12. That was my thought too. I would think that their 500 pound limit takes into account the forces on the hitch of a static weight of 500 pounds hitting some movement. With highway movement that weight would be higher on the hitch. From physics the formula F=ma would explain it I would think. F is force, m=mass, a=acceleration. I would think that at driveway speeds it would be ok too. Thanks for your comment. John
  13. Hi all, I have a tight parking spot next to the garage and thought a front mounted hitch would make it easier to maneuver the trailer into the spot. E-trailer has one that would fit my 2017 Ford Expedition EL, but the specs say it's only good for 500 pounds of vertical force. If anyone uses a front hitch, what did you do to make it work? Thanks
  14. I have one too. Don't unscrew and loosen the gripper too much as you can lose the little parts that grip on to the zerk. There are about three or four little pieces that will be lost. How do I know this? I did just that and had to buy another 90 degree attachment. Great tool though! John
  15. Hi John, what shocks are you going to use? Lew at Alcan suggested RadFlo. We plan to do the job in Grand Junction and do springs and shocks at the same time. $52 sounds like a good deal to avoid doinf the job. John
  16. John, what do they charge you to do that? I need to crawl under the trailer this week to grease ours. John
  17. Welcome to the family from #1290. You will enjoy yours. John
  18. I get the impression that the Bulldog shocks are better made. They don't seem very expensive. Is your Monroe shock the 555001. I can look at what the equivalent number is on the Bulldog. Thanks John
  19. Hi all, I plan to replace the four leaf spring type with Alcan five leaf type springs. The weak point in the four leaf spring type is that three inch section to the eye that's a single piece. Our trailer is hull number 1290, one of the last built in 2022. I thought it might be good to replace the shocks at the same time. I have about 12,000 miles on the trailer. My question is what model number and brand is best? John
  20. Welcome to the Oliver family. They're great trailers. Lots of information here on the forum and at Oliver University. Enjoy your trailer. John
  21. I found that some covers just wouldn't go on despite cleaning the area. Most did go on. Have you had that problem? John
  22. Dealerships add so many things when they're trying to close the deal. Brakes, wheels, rear seats on quad cab trucks. You get the idea. It's all marketing. John
  23. I think Camping World offers free dump services. Not as convenient as a gas station, but just fyi, at least one in Oregon offers that. John
  24. Wheels are overrated. 😂🤣. As long as he has three, he should be good to go. John
×
×
  • Create New...