DO NOT use this product

[rich.dev]

9 minutes ago, jd1923 said:

I'm not doing the windows but will run a full length strip up at the streetside roof line.

I did same John, but I used the 3/4” and on both the driver and passenger side.

https://a.co/d/08DrU7cW

Edited 3 hours ago by rich.dev

[jd1923]

9 minutes ago, rich.dev said:

I did same John, but I used the 3/4” and on both the driver and passenger side.

Yeah Rich, so it must have kept the drip lines off the fiberglass on both sides! I believe with 25" I should have about 6 ft leftover to place a drip edge on the rear just below the OLIVER sign.

You had cautioned us as to how this product would not straighten out, creating wrinkles, which can be seen in your picture.

This thread started with a $16 product, with the title "DO NOT use this product!"

The one you tried is $40 and the Trim-Lok with 3M tape is $63. It's expensive, but now that I have it in hand, you can stretch this product at a radius opposite to how it's coiled up for packaging and it stretches nicely without wrinkling. Your warning and finally @ScottyGS's suggestion got me to the right product, thank you! 

[taylor.coyote]

Hopefully not to be seen as a contrarian, I have permanently removed rain gutters on both sides of our trailer. We got tied of all the crap getting hung up in the gutters and streaking down the side. I intend putting short gutters above the windows but have not found this to be necessary.  We live on the rainy north coast of califorina and have NO REGRETS. 

Net results: its a lot easier to wash and keep our trailer clean and have eliminated streaking down the side of our trailer. WE WILL NEVER GO BACK.