Leaderboard

I agree, the forum has become/is becoming all but unusable with the slow connection speeds and the seemingly endless changes that pop up unannounced almost daily. So, would the keymaster Id'd as JWalmsley please step forth with a post and explain what your function is. We also need a direct contact cell number for you so we can contact you whenever there is a problem. Since the forum members generally consider this a 24/7 job, it would probably be wise to include your usual bedtime so we'd have an idea when it would be too late to call you.

Installed shade cords in our rear window and decided to leave frame original color. Could not find any shade cord re-thread diagrams matching the Ollie's windows. Decided to make rough sketches of the frame cord routing and shade cord routing before taking the shade completely apart. Frame cord routing: Shade cord routing: The cord used is about 30% thicker (1.5MM cord) than the original cord, did not use tape where indicated in the sketch because the new cord was sandwiched tightly between shade & frame without tape, used thicker cord on right: Broken old cord: There is one spring in the top and bottom of frame for cords to tie to: With larger diameter cord, threaded each hole one at a time instead of multiple holes: Copied the original cord routing: Night shade with new cord re-threaded: Job completed:

We have sprinkled moth balls UNDER the campers for years. We have also put dryer sheets (Bounce) in some of the drawers and compartments. However I don't see any unsealed openings into the Oliver hull that might need them. However I might put a few of both in the rear bumper, just to keep them from 'nesting' there. We also put both ends of all hoses together so that if they do get in there, they do not soil or nest.

What is Galvanic Reaction? - When two dissimilar metals are in contact and exposed to an electrolyte substance it causes one of the metals to lose ions and slowly consumes that metal. - It works much like a battery. One of the metals will become and act like an Anode(Negative) and the other a Cathode(Positive). This process will slowly consume the Anode and actually strengthen the Cathode. - Galvanic reaction occurs when an electrolyte combines with water. Depending on which electrolyte is present, it will completely(strong) or partially (weak) ionize with the water to form a strong or weak electrolyte substance. What is an electrolyte substance? Strong Acids Examples: Hydrochloric Acid, Sulfuric Acid, and other Acids Strong Bases Examples: Sodium Hydroxide, Calcium Hydroxide, and other Hydroxides. Salts Sodium Chloride Winter Road Treatment: - Different cities utilize a handful of different chemicals to treat roadways for ice. Most of these are from a form of chloride which does become an electrolyte once dissolved with water. TIP: It is always a good idea to clean these chemicals from any vehicle and/or camper when possible. What type of impact does this play on Aluminum? - When oxygen is present (in water), aluminum naturally reacts to form aluminum oxide and this is the key to its ability to resist corrosion. Unless exposed to a substance or condition in which destroys the protective layer, aluminum will remain resistant to corrosion. - When aluminum contacts another metal(steel for example), it sets in place the possibility of a galvanic reaction if an electrolyte substance comes in contact with the metals. What does Oliver do to prevent this natural process? A protective layer, cavity spray, is placed between the two metals. Zinc anodes are attached to the aluminum frame The Zinc becomes the anode part of the equation and if the galvanic reaction process takes place, it will consume the Zinc anode instead of the aluminum frame. How often should I check my Anodes? - Depending on where you live or where you travel you may or may not even have a galvanic reaction but it is still a good idea to inspect your anodes at least once a year and more if you start to notice that the anode is deteriorating.