
Teaney Hull 292
Members-
Posts
159 -
Joined
-
Last visited
Everything posted by Teaney Hull 292
-
Good to know. Thanks.
-
More DC to DC charger installation tidbits
Teaney Hull 292 replied to Snackchaser's topic in Ollie Modifications
Great info and now I understand. Thanks. Hope to see you going down the road and return the favor. Gary -
More DC to DC charger installation tidbits
Teaney Hull 292 replied to Snackchaser's topic in Ollie Modifications
Geoff, I need a little more help with your great detail. I ordered the 2 fans and Thermo switch. How are they wired together, and where does the + & - wire from the fans run to? Where is the fuse wired into the fans? One fuse for both? What size fuse? If I understand your drawing, the Neg from the TV goes to the Orian - in or to the Frame bolt? If the TV - goes to the Frame bolt, does and another neg wire goes to Orian Neg in??? Your pic, looks like a wire with a red strip goes into Neg in. I don’t see the POS wire going into the Orian. What am I missing? Does another Neg wire coming out of the Orian go back to the Neg frame bolt? Does the POS out of Orian, after the 60 amp fuse then go the the bus bar, to the left top of the back dinette that is on the battery box? Sorry for all the questions, but I want to get this right. My head is spinning from what the almost 100 feet of copper and the copper lugs cost. Right at $7 a foot for 2/0 AWG and $5.98 for 2/0 copper lugs. OUCH? Thanks in advance for the help. Gary Hull 292 -
More DC to DC charger installation tidbits
Teaney Hull 292 replied to Snackchaser's topic in Ollie Modifications
Carl, this Rocks. thanks for posting. I just ran my 2/0 cable like you did, and my helper/wife was on a conference call all morning long. Took me 2 1/2 hours by myself just to run the cable, 6 inches at a time, out the door to push 6 inch’s, back in the bath/front dinette/back dinette to pull 6 inches. So glad I saw someone post use soapy water and rag to make it easier to push the cable. Made a BIG difference. Not to get the Orian 50 amp wired/mounted/tested. -
More DC to DC charger installation tidbits
Teaney Hull 292 replied to Snackchaser's topic in Ollie Modifications
Carl, I feel the same way. What a GREAT Community of support. -
More DC to DC charger installation tidbits
Teaney Hull 292 replied to Snackchaser's topic in Ollie Modifications
Well said. I totally agree. -
More DC to DC charger installation tidbits
Teaney Hull 292 replied to Snackchaser's topic in Ollie Modifications
As I understand it, and I’m no expert, the 7 pin can NOT charge the Lithiums. I too am a BIG Will Prowse fan. Leaving the 7 pin wire connected can damage the wire/alternator when it try’s to charge the Lithiums. Hull 292 and I’m installing the Orian 50 amp DC to DC charger on my Nissan Armada (150 amp Alternator) to charge my 840 AH Watt Cycle Lithiums. I do not have Solar on the roof of Hull 292. Do have 480 portable Solar for the Zamp plug. We plan to head out west, use Harvest Host and some ‘boondocking and will be doing, or at least trying to do, a max of 5 hours of driving each day on they way. The DC charger will do a good job of getting the Lithiums up to power for AC when we stop. Hope this gives you info to explore the options and decide what is best for you and your Ollie. -
More DC to DC charger installation tidbits
Teaney Hull 292 replied to Snackchaser's topic in Ollie Modifications
Wow, This Rocks it. Thanks -
JD, as always I can count on you for great advice. Thanks again. As our shower was a dribble, and Anita could not wash her hair, I took the wash cloth/shampoo holder in the front of the sink and put a marine door. I’m able to see where the cables are coming in. FYI, just to the right from the outside is where I considered putting the new hole. When I looked from the inside, the sink plumbing drain is in the way. Hope it is clear in the pic below. Will carefully drill the holes and use a Cable Clam Craig used in his install. Gary Hull 292
-
Hull 292 here. It’s a 2017 build bought new by Duke and Chris Chadwell in 2018. My leaf springs still look OK. Thinking I might go ahead and buy the Alcon Springs to have, just in case. How much do they cost. Hope when the time comes, I can install as quickly and as Straightforward as you. Thanks Gary
-
Need your help on my DC to DC Orian 50 amp charger on Hull 292. There are 3 cables coming out and does not seem to have any more room for my Clam for the 2/0 cable. Should I go to the side of the rectangle? Or should I try to use on of the cable holes and add it to my clam? See pic attached. I’m open to any suggestions. Thanks Gary
-
Need your help on my DC to DC Orian 50 amp charger on Hull 292. There are 3 cables coming out and does not seem to have any more room for my Clam for the 2/0 cable. Should I go to the side of the rectangle? Or should I try to use on of the cable holes and add it to my clam? See pic attached. I’m open to any suggestions. Thanks Gary
-
Upgraded Shower and Bathroom Access Hatch
Teaney Hull 292 replied to NCeagle's topic in Ollie Modifications
Did you add the shut off valves for hot and cold? Our shower is only a trickle and will be changing out faucet when we get back from this trip. I’ve never worked with Pex. -
Bill, Gary Teaney here with Hull 292. Would love to get on the Plaque list. We bought the 2017 trailer from Duke and Chris Chadwell. They bought it new in 2018. Thanks for taking this on. Gary
-
Love your Don Quixote Logo. Had the pleasure of seeing Robert Goulet Play it live. To Dream the Impossible Dream is one of my all time favorite songs. We will be at site F27. Would love to hear your connection to the Logo. Gary
-
Hopefully when my Dometic dies the tariff’s will have settled down.