Jump to content

Recommended Posts

Oliver Travel Trailer for Sale
Find Oliver Travel Trailers for Sale
New Travel Trailers for Sale
  • Moderators
Posted

There are a number of "install" threads here on the Forum where owners have installed a "clear" glass (usually tinted to match the other windows in the Ollie plus a blind that can be operated from the interior without opening the door.

Many of us have used THIS GLASS and BLIND

Note that if you want this AND you want a white interior handle you will need to call the company direct and ask for the white handle.

Bill

  • Like 4

2023 Ford F150 Lariat 3.5EB FX4 Max Towing, Max Payload, 2016 Oliver Elite II - Hull #117 "Twist"

Near Asheville, NC

Posted

I replaced my Opaque door glass with a clear tinted one from Zarcor.
Really like it. Make sure to order the glass specific to the door used on your Oliver.
There were changes made over the years that affect the glass specs.
Their Airstream shades also have my attention....

https://www.zarcor.com/rv_products/rv-door-window-kit/spare-parts.php

Dave

  • Thanks 1
  • Like 1

2015 Oliver Elite 1, Hull 107

 

2025 GMC Sierra HD 2500 AT4, 6.6 L8T (gas)

 

Posted (edited)

Read my posts in this thread. I used a Lippert tinted glass insert because the door is a Lippert. Be sure to get the frame release clips and a new inside and outside frame because you will break some tabs while removing the frames. The new frames will also have new intact seals.


 

After installing the clear tinted glass I wanted a blind that could be operated without having to open the screen door. I had a friend that sews make me a blind out of heavy curtain material and used 2 spring rods to position the blind in the screen door frame. The top spring rod can be lowered to allow a viewing area at the top. 
 

 

IMG_7583.jpeg

IMG_7584.jpeg

IMG_7585.jpeg

IMG_7594.jpeg

Edited by Townesw
  • Thanks 1
  • Like 4

Bill and Martha

2018 LEII Hull 313 Original owners 3/14/2018

2019 Chevrolet 2500HD Duramax

 

Posted
On 3/19/2026 at 5:39 PM, DavePhelps said:

I replaced my Opaque door glass with a clear tinted one from Zarcor.
Really like it. Make sure to order the glass specific to the door used on your Oliver.
There were changes made over the years that affect the glass specs.
Their Airstream shades also have my attention....

https://www.zarcor.com/rv_products/rv-door-window-kit/spare-parts.php

Dave

Do you have (share) the part numbers of the window and any additional items to order to complete the project?

Thanks.

2022 Oliver Legacy Elite II, Hull 1242, 9/26/22

Lithium Platinum Power/Solar Package

Tow with Supercrew Cab 2019 F-150 4 x4, 5.0L 4-Valve V8 with 3.73 axle ratio & 157" wheelbase.

F-150 GCWR of 16,900 lbs with maximum load trailer of 11,500 lbs.

Posted
On 3/19/2026 at 5:12 PM, topgun2 said:

There are a number of "install" threads here on the Forum where owners have installed a "clear" glass (usually tinted to match the other windows in the Ollie plus a blind that can be operated from the interior without opening the door.

Many of us have used THIS GLASS and BLIND

Note that if you want this AND you want a white interior handle you will need to call the company direct and ask for the white handle.

Bill

Do you have (share) the part numbers of the window and any additional items to order to complete the project?

Thanks.

2022 Oliver Legacy Elite II, Hull 1242, 9/26/22

Lithium Platinum Power/Solar Package

Tow with Supercrew Cab 2019 F-150 4 x4, 5.0L 4-Valve V8 with 3.73 axle ratio & 157" wheelbase.

F-150 GCWR of 16,900 lbs with maximum load trailer of 11,500 lbs.

Posted

Just in case no one looked at Zarcor's website, the glass sold there is a Lippert product for their doors.

My older Oliver Lippert door (2015) used screws to hold the window trim and the glass in place (along with some butyl weatherstrip).
The newer doors use clips which complicate the switch but is still very doable. There are a few Youtube videos out there which I would advise watching if your door uses the clip system.

1 hour ago, Gliddenwoods said:

Do you have (share) the part numbers of the window and any additional items to order to complete the project?

Thanks.

The window I used from Zarcor was

Tinted Glass, Lippert Style A, Valterra Style C
Glass size: 21 7/16" × 12 7/16", Fits frame style A

I would call them with your door information and they will set you up. The kit comes with the glass and butyl so nothing else to buy except maybe some spare clips if your door is that style, I've read that they can sometimes break during disassembly.
Good luck!

   

Cheers,

Dave

 

  • Like 3

2015 Oliver Elite 1, Hull 107

 

2025 GMC Sierra HD 2500 AT4, 6.6 L8T (gas)

 

Posted

Oops,

forgot the part #: PR1022. But Check your door. My door is 11 years old!

Dave

  • Like 2

2015 Oliver Elite 1, Hull 107

 

2025 GMC Sierra HD 2500 AT4, 6.6 L8T (gas)

 

  • Moderators
Posted
14 hours ago, Gliddenwoods said:

Do you have (share) the part numbers of the window and any additional items to order to complete the project?

Do what DavePhelps says above!  

There are at least two different windows on our Ollies and have VERY different mounting methods.  Call the company to make sure that you get the right part(s).

Bill

2023 Ford F150 Lariat 3.5EB FX4 Max Towing, Max Payload, 2016 Oliver Elite II - Hull #117 "Twist"

Near Asheville, NC

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...