Jump to content

ORDERING IS CLOSED for Cutting Boards and Shower Mats


Foy_Mirna
 Share

Recommended Posts

Thanks for all the interest in my woodworking! I have enough requests to keep me busy for the next month. I may open this back up but for now, I am taking NO more orders.

 

It was wonderful to get to know some many Oliver Owner's at the Rally and many of you have asked about our cutting board & shower mat.  Lots of you have asked about getting one or both for your trailers.  So, this week, I will begin milling the wood to make more.  While I have a few confirmed requests, I will open this up to any and all.  If you would like one please, let me know as this will be my last run as all good things come to an end.  Contact me at 516 635-5656 or 48ocean@gmail.com.  

 

Cutting boards are made to your specific sink size.  They are American Cherry and Rock Maple done in a ship decking pattern (pictures below.)  They are designed to stay in place when traveling and can be used on both sides. Cost $50 plus UPS charges to ship to your address.

 

Shower mats are designed to fit both Elite I and II showers. They are made of American Cherry and Honduras Mahogany in a criss-cross pattern.  The construction uses shiplap joinery and brass screws with no glue for long life. Silicone feet keep them off the shower floor and allow water to drain.  Cost $150 plus UPS charges to ship to your address.

 

Please note: These are wood and as such will need a little care from time to time.  Cutting boards should be cleaned and dried after each use and a coat of plain mineral oil applied once a month to keep up their glow.  Shower mats should be stood up after use to dry and a coat of plain mineral oil once a month or sooner if you shower in your trailer often.

 

Happy trails,

 

Foy

IMG_0717.thumb.jpg.4f417f0e51214b97cc891f49ff5bc4a8.jpg

IMG_0714.thumb.jpg.47edbb25b55808fad5949d7b70b71fd4.jpg

IMG_0699.thumb.jpg.cb4fed622fea904e28766a64cccd8a90.jpg

IMG_0700.thumb.jpg.192a0e33fa98454d303600b4e17dd003.jpg

  • Thanks 6

Onward,
Foy and Mirna 

Roamy Mc Roadhouse
2017 Legacy Elite II, Twin Bed
Hull #227
2021 RAM 1500 Limited

 

 

 

 

Link to comment
Share on other sites

Here is my new cutting board, it is lovely and it really brightens the interior.

 

A0316B87-754E-4D6F-A8C6-A69127EBD9FD.thumb.jpeg.ebbfdd14c7181ebbbebd023899f1cdf9.jpeg

F022005A-A459-4965-8C51-2CC9D37C11B1.thumb.jpeg.594f2b859b85db4e4349af2d928ceffc.jpeg

B14EEA67-099D-4371-98DE-2109A2D891EF.thumb.jpeg.3f69a1c651dd2c204fc131c7757b325f.jpeg

4889F0C7-1D10-4EDA-980A-7BCE85AB6CB8.thumb.jpeg.6bd1f2d596feb9574db13b4d1aba4100.jpeg

 

I got this in a very roundabout and unexpected way.

 

DavidS won it at the Oliver Rally, and unfortunately for him it is square and intended for the later (large) sink. He arranged for another narrow one to be shipped from Foy, who told him to find another Oliver owner to give this one to. David reached out to me by PM and told me he wanted me to have it.

 

I offered to pay for the shipping and he would not even let me do that.

 

It is a beautiful accessory, and I am unexpectedly touched by both Foy and David’s actions. Thank you both, I will take care of this board and enjoy its beauty for many years.

 

This Forum really is becoming a large extended family. I enjoy participating, sharing and learning here.

 

Thanks again.

 

John Davies

 

Spokane WA

 

 

  • Thanks 7

"Mouse":  2017 Legacy Elite II NARV (Not An RV) Two Beds, Hull Number 218, See my HOW TO threads: https://olivertraveltrailers.com/topic/john-e-davies-how-to-threads-and-tech-articles-links/

Tow Vehicle: 2013 Land Cruiser 200, 33" LT tires, airbags.

Link to comment
Share on other sites

I work in wood for just this reason, the joy and happiness it brings others.  Thank you John and David for passing it on.

  • Thanks 1

Onward,
Foy and Mirna 

Roamy Mc Roadhouse
2017 Legacy Elite II, Twin Bed
Hull #227
2021 RAM 1500 Limited

 

 

 

 

Link to comment
Share on other sites

You are so talented and your work is beautiful and practical as well. I would love a cutting board for my new 2018 Oliver Legacy Elite 11. Just picked it up May 15,2018. If you start to make these again please let me know. Contact: rpwlww@yahoo.com Thanks Linda (Nana)

  • Thanks 1
Link to comment
Share on other sites

You are so talented and your work is beautiful and practical as well. I would love a cutting board for my new 2018 Oliver Legacy Elite 11. Just picked it up May 15,2018. If you start to make these again please let me know. Contact: rpwlww@yahoo.com Thanks Linda (Nana)

 

Thank you Linda,

 

Very kind of you. I have about two more weeks of work on my current orders. Once I finish them, I will open ordering back up. If you don't hear from me in two weeks reach out to me. My email is 48ocean@gmail.com

Onward,
Foy and Mirna 

Roamy Mc Roadhouse
2017 Legacy Elite II, Twin Bed
Hull #227
2021 RAM 1500 Limited

 

 

 

 

Link to comment
Share on other sites

Showing off my new cutting board. It's stunning & if it were a little bit bigger, I could use it at home too!

 

20180601_073151.thumb.jpg.de2160bb644de6eb3cd077c3b9965de9.jpg

 

Thank you Foy. Your craftsmanship is exceptional!

  • Thanks 2
Chris & Duke Chadwell
🐾Maddie & Baxter🐾
Elite II Hull 292
2017 F-150 Lariat 3.5 EB 4x4 Lakeland, FL 

 

 

Link to comment
Share on other sites

Showing off my new cutting board. It’s stunning & if it were a little bit bigger, I could use it at home too!

20180601_073151.jpg

Thank you Foy. Your craftsmanship is exceptional!

 

Thank you, I'm so happy you like my work!

Onward,
Foy and Mirna 

Roamy Mc Roadhouse
2017 Legacy Elite II, Twin Bed
Hull #227
2021 RAM 1500 Limited

 

 

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...