Jump to content

Need Pictures of the Solar Panels


Stranded

Recommended Posts

Curious question, I know.  I recently got some newer Zamp panels for my trailer, which will take them from 200 watts to 230 watts.  On my 2017 trailer, the two older style Zamp Legacy style solar panels were attached with aluminum angle bars on the sides and they were screwed together where they butted up to each other.  

 

On the newer Zamp panels, they have have special mounting bolts that go into a recessed area around the perimeter of the panels.  For the portion of the panels that butt next to each other, I'm wondering how the factory joins them together: do they simply drill longer holes through the recessed valley on both panels and then through bolt? or do they use a piece of flat aluminum and still utilize the Zamp special mounting hardware by having them both mount to an aluminum bar?  

 

If someone with a newer trailer could send me a picture of the underside of the solar panels, I'd sure appreciate it.  Specifically where the two panels butt up next to each other.  I'm just curious to see how the factory mechanically connects them before I start drilling holes in my panels.  

 

Thanks!

2017 Elite 1

Hull 220

1997 Dodge 2500

Link to comment
Share on other sites

travel trailer units for sale
Find Oliver Travel Trailers for Sale
New Travel Trailers for Sale

Hi @Stranded, here are some pictures of how the 2020 panels are connected.

First, there is a solid 90 degree angle bar on both the front and back of the panels connecting them together:

IMG_3070.thumb.jpg.783472a29fc0bd00cb1d80c68155f3ed.jpg

Second, there are 4 bolts that go through the sides of the panel where they are butted up together (4 bolts total).  I've included two pictures that show both sides.  You can also see the underside of the angle bar in one of the pictures:

IMG_3072.thumb.jpg.9d063458b2131c2e5c37a118e92b646c.jpgIMG_3071.thumb.jpg.2e804b42e6cbcae861c4461af53c8e2d.jpg

All in all, pretty much bolted such that they are a single unit - which makes sense given that they are mounted as if they were a single panel.

Hope this helps...  I can take more pictures or measurements if you need.

Best,

John

  • Thanks 1
  • Like 2

States Visited Map

2020 Elite II, Hull 688 --- 2021 Silverado 2500HD, 6.6L Duramax Diesel

Link to comment
Share on other sites

  • Moderators

@NCeagle, is that a Zamp Obsidian  panel that you've added, with the thin black frame?

2008 Ram 1500 4 × 4

2008 Oliver Elite, Hull #12

Florida and Western North Carolina, or wherever the truck goes....

400 watts solar. DC compressor fridge. No inverter. 2 x 105 ah agm batteries .  Life is good.


        
 

 

 

Link to comment
Share on other sites

Hi @SeaDawg, yes it's a 100 Watt Obsidian Zamp panel that I added to the pair of 170 Watt ones that came with the trailer.  That's all I could add for now without any upgrades to the Zamp controller (30 Amp).  It fit great.  🙂  Here's a few more pictures of the panel fit and install:

Prior to bolting and taping the panel on, I made sure it fit well:

431418304_IMG_2669(4).thumb.jpg.1b1638177c73bccfb85a59e036edcdb7.jpg

Then I bolted the trailing edge to the existing solar panel mounts and used VHB 3M tape on 4 additional mounts on the front edge.  Probably overkill on the front - it hasn't budged over several thousand miles.

IMG_2880.thumb.jpg.2152bb2bf125e9939751f1837f469b1a.jpgIMG_2878.thumb.jpg.d2007704bf1c8827e981fcc19e3f8241.jpg

  • Like 3

States Visited Map

2020 Elite II, Hull 688 --- 2021 Silverado 2500HD, 6.6L Duramax Diesel

Link to comment
Share on other sites

  • Moderators

I think the highly efficient obsidian panels are beautiful,  and light, and just a great piece of equipment, hugging the top of the trailer so closely with the rail attachments.

I wish Zamp made higher wattage obsidian panels. Don't know if the innovations will continue, as Dometic recently acquired Zamp.

2008 Ram 1500 4 × 4

2008 Oliver Elite, Hull #12

Florida and Western North Carolina, or wherever the truck goes....

400 watts solar. DC compressor fridge. No inverter. 2 x 105 ah agm batteries .  Life is good.


        
 

 

 

Link to comment
Share on other sites

  • Moderator+

Make sure when parking the trailer that it is 90 degrees to the sun. Otherwise, the original panels, being mounted higher, will cast a shadow on the new panel. As you probably already know, if you cover any part of a solar panel from the sun, it will cut the output by half.

  • Like 1

Steve, Tali and our dog Rocky plus our beloved Storm, Lucy, Maggie and Reacher (all waiting at the Rainbow Bridge)

2008 Legacy Elite I - Outlaw Oliver, Hull #026 | 2014 Legacy Elite II - Outlaw Oliver, Hull #050 | 2022 Silverado High Country 3500HD SRW Diesel 4x4 

 

             801469912_StatesVisitedTaliandSteve08-23-2021-I.jpg.26814499292ab76ee55b889b69ad3ef0.jpg1226003278_StatesVisitedTaliandSteve08-23-2021-H.jpg.dc46129cb4967a7fd2531b16699e9e45.jpg

 

 

Link to comment
Share on other sites

  • Moderators
8 hours ago, Stranded said:

If I’m seeing the pictures correctly, it looks like Oliver is ignoring the use of the Zamp rails and just through-bolting the panels like they did on the older Legacy panels. 

My 2017 has 2-160 watt panels that are original equipment.  The panels are attached to the AM Solar mounting feet with the same spring nuts as shown in your pictures.  If the frames are the same on the old and new panels, which I can’t tell with you pictures, I believe the difference may be the mounting feet.  Oliver used AM Solar mounting equipment on NCeagle's original panels and he used different mounts for the new Obsidian panel.

It’s hard to see in NCeagle's picture, but it looks like the 1/4” bolt is visible going up through the clamp and into the spring nut which is in the t-slot in the bottom of the rail.

Mossey 

D827F1D2-6180-4F5F-A04D-A7B41151C0D9.jpeg.8d96f6854ab9f7a9515441bcb9a628e1.jpeg

Mike and Krunch   Lutz, FL  
2017 LEII #193 “the dog house”

 

 

Link to comment
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...