-
Posts
255 -
Joined
-
Last visited
-
Days Won
5
Everything posted by geO
-
Remote power button not working for Xantrex 2000w inverter
geO replied to tallmandan's topic in Mechanical & Technical Tips
Tallmandan, I hope it works out for ya. Let us know! -
Thanks for this tip Steve. Today while doing the other side I used your method and both tires lifted off the ground easily. This will be my method from now on.
- 69 replies
-
Well, hooked up to my tv and a proper platform sure made my life easier.
- 69 replies
-
- 4
-
-
I had a bit of a struggle removing the old cotter pin. I cut down the new one and was wondering if how I replaced it is ok?
-
Just had that happen! Shattered in a bunch on pieces. Off to Home Depot for some wood.
- 69 replies
-
- 4
-
-
-
Thanks John! After getting my bearing completed I'll replace these outdated tires before hitting the road.
-
Thank you all for your quick replies. I sensed possible danger here and I do like to be safety oriented. For someone like me a video is my best method of instruction. It clears away any doubt in my mind. I must also state that you guys on this website are amazing with your level of knowledge!
- 69 replies
-
- 1
-
-
It would be nice if Oliver service department would make a video showing the right process of lifting up the Oliver for maint.
- 69 replies
-
- 5
-
-
Thanks Bill. I stopped moving forward on this for now. I'll try hooking the trailer to my tow veh and use a piece on 2x4 as you've stated.
- 69 replies
-
- 1
-
-
Should I be using the rear stabilizers to help? I also don't like how the bottle jack looks. Does not look safe.
- 69 replies
-
I'm not feeling comfortable with jacking up the forward wheel. Is my positioning in the proper spot? The front is a pretty good bit off the ground. Got the back wheels chalked. Just checking before I continue.
- 69 replies
-
Mine where made on the 48wk of 2016. They are over 5 years old and will be replaced. Noticed this today. Just a reminder for others to keep on eye on your tire date. IMG_1835.HEIC
-
Got my first wheel done and the job went very smoothly. Having the right tools sure does make things easier. Thanks everyone for posting your insight on this!
-
I've finally got all my parts and getting ready for the task. I found this video very helpful!
-
I've had this happen to me and had to go through a reset. The folks at Zamp are very good in troubleshooting as I don't remember how they helped get it working.
-
Remote power button not working for Xantrex 2000w inverter
geO replied to tallmandan's topic in Mechanical & Technical Tips
Tallmandan mine would not turn on. Bought a new one problem solved. -
Remote power button not working for Xantrex 2000w inverter
geO replied to tallmandan's topic in Mechanical & Technical Tips
I did what Bill suggested and ended up needing a replacement. Got it from Amazon. -
FrankC, thanks for the informative info and your write up of tools needs is very helpful! Thanks!
-
Mossey, thank you very much for the info. I'll try my luck with google and find the real ones. My bearing are the original when I picked it up.
-
I have researched several video’s on how to repack the bearings on my Oliver and am looking forward to this task. I own a 2017 Elite II and with all the different numbers I’ve seen can someone tell me what Timken bearings and seals I will need for my model? Sorry if it has been posted but I get lost in the numbers. I figure I would replace them since they got over 60k on them.
-
How does current fuel prices dictate your traveling plans for the summer? I fill up diesel about every 400 miles.
-
I'm getting ready to do the same thing and was just wondering that a few days ago.
-
Finally! My Batteries and Inverter Now Run My AC!
geO replied to Spike's topic in Ollie Modifications
Very nice Spike! It looks awesome. -
MaxxFan service lubrication repair help?
geO replied to John E Davies's topic in Mechanical & Technical Tips
Prepare to pay up if you're even lucky to find it. I think soon you'll need to be a millionaire to afford RVing! -
Grey tank full before tank monitor says so....
geO replied to jordanv's topic in Mechanical & Technical Tips
I've never tried that. Thanks for the tip..