John Dorrer

Nothing like "A Post Hijack"🤣

Definitely have to be careful, thoroughly wash with soap and water and then apply a spray of ceramic coating. Haven't had any that wouldn't come off with soap and water.

I have used 303 products for years and have their streak remover. I have been washing on a regular basis after a trip and have not had the issue for a couple of years😊

In the down position you will more than like have worse damage. This is the first time this has come up and definitely doesn't need a knee jerk reaction. Should it happen, probably not. A service ticket is the correct action for now. There is a good reason storing it in the up and locked position. Sorry you experienced this. Missed that this was on a 2023 post. Thought this was recent🙃

Great view. 👏👏

Getting water in the motherboard has caused numerous fan failures. We remove the screen and with a hex the fan blade. They go into house to be washed with hot water and soap. I then use a moist paper towel to wipe the fan housing.

Cut out the sealant and recaulk it Not sure what sealant Oliver uses. Give them a call. Install gutters over the sign and windows.

Yes, corrected post🙃

When I went to loosen the nuts on the breaker posts, I found them loose. I used locktite. I now wonder whether the breaker was actually bad. When I pulled cable ends off the breaker posts, I found them to be pitted, which leads me to believe there was arching due to loose connections. I gave both cable ends a good spray of DioxIT D5, both sides and two applications. I let them dry before re-installing the cable ends onto the posts. I used Green Locktite, per Jason E. I tightened everything as tight as possible I waited 24 hours for the Locktite to set-up before turning the power back on. As mentioned in an earlier post everything works normally. Lesson learned. Check all electrically connects at the beginning of the year. There probably wasn't anything wrong with the breaker, just loose connections. Since I purchased 2, I decided to install a new breaker. It appears what happened was Owner error for not checking the connections.

Received my 2 Gorilla hoses last week. Looking forward to using them. I have had one soft hose for 12 years I use to flush my black and gray tanks.

Yep it gets old

Great idea

Thanks

What campsite at Tunnel Mountain? Great views

We probably won't be there either, but we shall see

Looks like a great trip.

Figured it out. For me it was like putting square peg in a round hole. Stupid, Stupid🙃

I got it. This was totally my error. I was clicking on the wrong place on my profile. The instructions were clear, paste on signature. Sorry for creating a cluster "F__K"🙃

Deleted it. However no matter what I do the new map won't load. I followed each step to the "T". The new map was saved in my profile, appears in my profile, but won't show up after I hit save.

Thank You

Yep. How do you delete the old US map? I haven't tried that. Let me know how to delete the old one. What's strange is my profile shows the new map, but when I save it and then go to one of my posts the old one is still there.

I'm just going to purchase the whole shebang. I would like to stay married🤣

I followed every step, pasted onto my signature page. See the screen shot. I then scrolled to the bottom and hit save. Still my old map continues to show up.

Changed out the inverter breaker. Turned batteries on, then inverter breaker, and finally solar. Waited a few minutes and turned on the inverter at the remote. Everything fired up. I then placed a cup of water in the microwave for 2:15 minutes and it worked as it should have. After speaking to Jason E. at the Mothership in February, Oliver is no longer installing the breaker system. They are installing a more robust fuse. JD, I agree with you on the use of a fuse vs. breaker. I asked Jason what the cost to switch out and it was, I believer over4 $1,000. Jason suggested I stick with the breaker. Hopefully this will last for awhile. I bought 2 breakers, so I have one in the closet.

👍