Yukon Posted September 2, 2018 Share Posted September 2, 2018 I could not agree more with John Davies, who came up with this? We were driving home and the mount on the bracket decided to deploy on it own'', You could hear the TV crash in the downward Position. Hell we were doing 60MPH and you could hear it in the Truck! This is my fix a velcro strap........The best i could come up with. 3 Link to comment Share on other sites More sharing options...
KountryKamper Posted September 2, 2018 Share Posted September 2, 2018 In your picture the TV is not hooked on the gold color latch. 1 Tom & Cheryl LE II #305 2018 GMC 2500HD SLT Duramax Link to comment Share on other sites More sharing options...
Moderators Mike and Carol Posted September 2, 2018 Moderators Share Posted September 2, 2018 If you tighten the hex screws on both sides of the mount it will significantly decrease the potential to come unhooked while on bumpy roads. I keep mine tight enough that the TV will stay stationary halfway down. Mike 4 Texas Hill Country | 2016 Elite II #135 | 2020 Ram 2500 6.7L Link to comment Share on other sites More sharing options...
Yukon Posted September 2, 2018 Author Share Posted September 2, 2018 That gold looking latch pivots around and still deploys the TV when it wants too. I will try tightening the hex nuts '' thanks . will still backup with velcro strap. 2 Link to comment Share on other sites More sharing options...
Moderator+ ScubaRx Posted September 3, 2018 Moderator+ Share Posted September 3, 2018 I could not agree more with John Davies, who came up with this? I’m the one that came up with that tv mount back in 2013 and had it installed during the build of our Outlaw Oliver II. At first Oliver would not use it for anyone else due to RVIA rules about blocking the egress window. Now it is standard. We've pulled that trailer for 50-60K miles all over this country and not once has the tv come down. Check all the screws and adjust tightness if needed. Also, make sure the rotating cam/pawl lock is turning freely. 2 Steve, Tali and our dog Rocky plus our beloved Storm, Lucy, Maggie and Reacher (all waiting at the Rainbow Bridge) 2008 Legacy Elite I - Outlaw Oliver, Hull #026 | 2014 Legacy Elite II - Outlaw Oliver, Hull #050 | 2022 Silverado High Country 3500HD SRW Diesel 4x4 Link to comment Share on other sites More sharing options...
Maverick Posted September 3, 2018 Share Posted September 3, 2018 Yukon wrote: I could not agree more with John Davies, who came up with this? I’m the one that came up with that tv mount back in 2013 and had it installed during the build of our Outlaw Oliver II. At first Oliver would not use it for anyone else due to RVIA rules about blocking the egress window. Now it is standard. We’ve pulled that trailer for 50-60K miles all over this country and not once has the tv come down. Check all the screws and adjust tightness if needed. Also, make sure the rotating cam/pawl lock is turning freely. When we ordered our LEII in April 2015 I requested a center mounted TV with fold down option (I provided the information for the fold down TV mount that they are currently using, I said if necessary I will provide the fold down mount and the answer was NO). We were informed that it could not be done, the only TV option was the corner mount. So why is it that some people can get some things done their way and the others can not have the same option installed? Horace & Dianne Chesapeake, Virginia 2016 Toyota Tundra Crewmax 4x4 Limited 2015 Oliver Legacy Elite II - Hull # 93 Link to comment Share on other sites More sharing options...
Overland Posted September 3, 2018 Share Posted September 3, 2018 When we ordered our LEII in April 2015 I requested a center mounted TV with fold down option. We were informed that it could not be done, the only TV option was the corner mount. So why is it that some people can get some things done their way and the others can not have the same option installed? Because we owners are Oliver's R&D department. I think early on, they'd try most anything an owner requested. Then they got to the point where they'd say no until the third or fourth person asked and they'd relent and try it. Now I think they say no until they see one of us make the modification ourselves and then they adopt it. 2 Link to comment Share on other sites More sharing options...
BackofBeyond Posted September 3, 2018 Share Posted September 3, 2018 I'll add - the center mount TV - is an issue with emergency egress, until a passable mount was found/developed Oliver had to use the corner mount. Industry regulations accepted/required for certification do drive design. I find owner R&D a good thing, I get to see them early on, adopt what I like, make my own, and Oliver does similar - only they have certification issues to deal with - me I'm on my own. Have I mentioned how much I enjoy this forum - so many good ideas, smart people, supportive people, gosh cumbia breaking out.... Cindy, Russell and "Harley dog" . Home is our little farm near Winchester TN 2018 Oliver Legacy Elite II - 2018 GMC 2500 Duramax "Die young - As late as possible" Link to comment Share on other sites More sharing options...
Moderators Mike and Carol Posted September 3, 2018 Moderators Share Posted September 3, 2018 We had a corner mount TV. I wanted to move it to the center and used the mount Steve recommended. We like the center mount much better. There are two hex screws on the sides of the hinge. If they are kept tight it prevents the TV from moving around. We did have it come unhooked once after a rather large bump. Lots of other things moved around too. Once in well over 20K miles is acceptable... Mike 2 Texas Hill Country | 2016 Elite II #135 | 2020 Ram 2500 6.7L Link to comment Share on other sites More sharing options...
Mainiac Posted September 3, 2018 Share Posted September 3, 2018 We have a 2017 and they were still trying to get the RV certification to mount a center pivot. They would have provided the mount and installation, if I dropped shipped them a tv. We elected not to bother at the time. ( We figured to wait until the bugs were ironed out). We must admit we do not have a problem with it in the corner as far as operation goes. It also holds two bed pillows behind it while traveling. I do think it is a lot more aesthetic looking in the center... Link to comment Share on other sites More sharing options...
Yukon Posted September 3, 2018 Author Share Posted September 3, 2018 So how is this thing suppose to work'' ? Push up and it locks? pull down and it releases? Maybe I have a bad one '' it deploys when it wants too. Is it a one hand operation?.................Please advise............Yukon Link to comment Share on other sites More sharing options...
Moderators Mike and Carol Posted September 3, 2018 Moderators Share Posted September 3, 2018 The way it should work: push the TV up until it engages the latch. To let it down, push up on the TV and the latch should release and the TV can swing down. If the hinge is too loose then the TV could bounce around on rough roads and release itself. Maybe your latch isn’t positioned correctly? Mike 1 Texas Hill Country | 2016 Elite II #135 | 2020 Ram 2500 6.7L Link to comment Share on other sites More sharing options...
KountryKamper Posted September 3, 2018 Share Posted September 3, 2018 It's a 2 handed operation. With one hand hold the gold latch vertical, then push up on the TV to where the latch is able to set in the hook on the mount. Don't feel bad, I spent half our 1st night with the trailer trying to figure it out. 1 Tom & Cheryl LE II #305 2018 GMC 2500HD SLT Duramax Link to comment Share on other sites More sharing options...
Rumline Posted September 4, 2018 Share Posted September 4, 2018 It's only a one-handed operation on mine. We do what Mike and Carol described. 1 2018 OLEII #344 | 2018 Ford Expedition Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now