All Activity

Couldn't agree more. JD, I like your lock setup better than my own. What are you using and have you been happy with them?

Would LOVE to be able to make great Italian beef (sandwiches - dipped!) but have t tried my hand at that. I found Mariano’s deli has the meat and au jus - not bad. Unfortunately, “Greek Town” on Halstead street is a shadow of its former self (perhaps not quite as decimated as Maxwell street.) but condos have taken over all but two of the dozen Greek (and Cypriot) restaurants that were there ten or fifteen years ago. Yeah - I spent 50 years there and EVERY February I swore I’d had my last Chicago winter. Yeah - the traffic’s a pain - but so is Dallas. Seems like they’re always tearing up the interstate and clogging up the works. We needed to pick a place to officially call “home” - so no state income tax, and about half as much to put tags (plates) on our vehicles mean Texas beat Illinois. Also not fond of Illinois’ gun laws.

Where are all the Ollies? On this 4th of July, the 250th Anniversary of our Great Nation? In 2 weeks, we'll be camping the Coconino NF, first Walnut Canyon and then boondocking the Kaibab NF just south of the Grand Canyon. But on this special holiday, our Ollie is just parked at home. We enjoyed Prescott Frontier Days, the "World's Oldest Rodeo" this year. Annually, it runs over the 4th of July weekend. It was a fun evening! 🤠

Good idea. We did ours May 2025 when they were readily available. This upgrade sure provides a reassuring feeling when towing! 😎

It' just not the same and after 44 years of the hard city life, it was time to move on! Chris still has one sister and her oldest son there, goes back annually. For me, I go back rarely, but for weddings and funerals. We all miss the food! No better food in the world than all the ethnic variety of Chicago! Chris makes awesome Italian Beef sandwiches, far better than Vienna package foods and as good as any Chicago Ma & PA shop makes in the city! She makes decent pizza too, as we do NOT eat pizza out anymore. Only in Chicago do they make the right dough, thin or thick, and Italian sausage! She likes thin, I like both. But the only place we go when in Chicagoland is Freddy's Pizza in Cicero IL (SW side). The best Italian pizza/deli market in town! 😎

Our 2022 LE2 doesn’t have the side graphics like yours does - just the green/gold oval front and spare tire cover, so I’d likely opt for ‘white’ if I tried to repaint anything. That’s pretty low on my list. Our propane cover has the access hatch on the front rather than the top. It’s “white” too - and not different enough from the fiberglass that I’ve even noticed it.

And we both started from Chicago! 😎 It was a great city, back in the day. It still is a great city! Great for food and culture. I’m not into sports - but some people like that. (Oh, and REAL Chicago Pizza is THIN crust, tavern-cut. Yeah - I like a good debate.) I hate moving. My parents were renters - so we moved A LOT when I was young. Every time I’d move, I’d say “I’m never moving again unless they carry me out feet first!” I think we accomplished the “last” move because we no longer have a house or apartment. (Now if I could JUST empty out that 10x20 storage unit full of stuff that’s too good to throw away, but nobody wants to buy…) I just have to get a bit less sentimental and we can pare down the “must keep” stuff to fit in the same storage unit where we keep the Oliver when we’re out of the country.

@SeaDawg ?

The furnace, WHW and fridge vents were painted (see pic). Then I purchased new gray outlet boxes, LP hatch on doghouse, etc. I chose grey to match Oliver graphics and our TV is two-tone with grey in the lower sections. Didn't want more shades of white! I would love to have a grey door latch to match, but painting parts that are handled often is not a good idea. I could have replaced with the OEM chrome like shown in Rob's picture, but white powder-coat it is.

Not that we need one more special fluid to tote around in our trailers or TVs - but how about glycerin or KY jelly instead of a petroleum or even vegetable oil based product? I’ve found that the fiberglass collects stains so efficiently that I’d be leery of using anything that might add to my workload. My assortment of cleaning/polishing/waxing products requires its own tote!

And we both started from Chicago! 😎 It was a great city, back in the day. In 1999, a company move got us from IL to Northern VA. The big 51' moving trailer full. They even transported a couple of horses and a classic car! 🤣 The only time in my life we used a moving company in more than a dozen moves (only because the company paid)! VA to AZ in the 26' trailer mentioned above. Moved a classic '59 Chrysler 300E from TX to AZ on a HD car hauler. Moved AZ to TX to FL in the 16' box, 19' trailer we had for years. Lastly moved back to AZ from FL in 2018 after purchasing a new 18' box cargo trailer. I had every SF of this trailer packed. You can't see it but there are 3 motorcycles and a ton of tools in the front of the box! The red cargo trailer was the only one purchased new. Bought and sold 5 trailers all at a profit from buying well. Made a $700 profit on this last trailer which was breakeven for the diesel fuel spent on the move! 😎 Sorry for the thread drift, but we were done talking Casitas, right?

I would assume that I have the same door as all the early Elite 1 models. I wonder if any of those have failed?

We were in Tolono Nevada this past March and had such strong winds, it slammed the door of our truck open so hard I was worried it bent the hinges. (Luckily it didn’t) It also slammed the driver’s door closed while I was getting in or out and I literally had to fight to free myself. It also filled our nice “new” truck full of grit that I’m still vacuuming and dusting four months later. The point? If it’s at all windy - I just make it a point to HOLD THE DOOR - any door. I don’t find that I have to “fight” the door while trying to hook/unhook it. I just realize it’s preloaded to a point that assure there won’t be any “slop” when the door is hooked in the open position. I even found the right sized rubber grommets at my local hardware store so that when one gets cut, worn out, or disappears - I can pop a new one in. Doesn’t that equate to having to move the door with more than the force of a 40MPH wind any time you want to open and close it?!

I believe those of us with slight horizontal lines in the interior door skin were caused by wind, where the door flew open (several times through the years) hitting the black rubber stopper which stresses the door, causing these cracks. The damage to Craig's door is more extreme, likely something defective in its construction vs. more wind damage than the others. I'd rule out sun damage in either case since there is no damage to the exterior skin. The interior skin on Craig's door buckled, came out of the inside frame and separated from the core to do so! Did they miss gluing this area? Here again is the picture I took to show the Lippert Friction Hinges installed. I hadn't paid attention to the cracks on our door until this thread was started Nov '24, since the cracks are minor and often hidden by the screen door. I believe if Lippert or OTT made Friction Hinges standard, we would not see this wind damage, but not Craig's issue which looks like a manufacturing defect. Were the doors made differently through the years? I think not, except perhaps for Chris' @CRM with his one-off 2010 hull. Bill's @topgun2 door has no cracks. Mike @Mike and Carol and I both have minor cracks. These hulls are all 2016 and the doors likely came from the same Lippert batch. Perhaps Bill kept his door from banging on the stopper better than Mike did and I did (including prior owners). I know before I installed friction hinges the door flew out of my hands several times banging against the stopper as I cringed! It's often very windy where we camp! No more door bangs, no further damage since the friction hinges were installed. Craig, I'm very sorry to hear of your misfortune. I believe Lippert owes you a door. Your damage is not from abuse. At a minimum, ask them for money back on the core you paid for, that should still be under warranty, towards purchase of a new door. Make some noise and hope for some help! Best wishes, JD

I didn’t say I didn’t like them - just that if you’re keeping things white - you missed a spot. 😂 That said - you have an excellent point on the “10 shades of ‘white’”. The Truma cover, furnace cover, and fridge covers are all different. I try not to obsess too much…. Did you paint yours? Why did you choose grey over Oliver ‘white’?

I wish I had the time and forethought to do that. I did the U-Haul a few years back to close up our Chicago home and take a few items to Texas. Little did I know that the prices for the one-way vs local rentals are astronomically higher!

My issue with the OE Fairview was that it leaked profusely. We just connected a spare tank to our small two burner Coleman stove, Didn't need the space heater or hot wter inside. While on the road I had our son get on the jungle website and ordered a new one.

Oliver Bulldog 2 5/16 coupler upgrade. I decided to finally pull the trigger and upgrade our Oliver from a 2” 7000# Bulldog coupler to a new Bulldog 2 5/16” 12500 coupler. I also ordered a spare coupler repair kit. These 2 5/16” BD couplers are becoming difficult to locate and purchase with Bulldog filing for bankruptcy protection in Oct of last year😳. It’s my understanding, that BD is no longer manufacturing and shipping these couplers to RV manufacturers possibly due to bankruptcy proceedings. (open source) I did attempt to purchase a 2 5/16 BG coupler from Oliver and they no longer have this upgrade in stock and available to purchase and ship. Jerry at Oliver told me they have no idea if or when they will have this coupler in stock again and are seeking alternative options. Will there will be a restructuring with BD? Anyone’s guess. I will be taking the new coupler to a friend’s machine shop to have the holes precisely drilled. If you’re on the fence about upgrading to a 2 5/16 12,500 #coupler it might be a good time to search for a vendor that has one on the shelf and ready to ship. A big thank you to @rideandfly for helping source this coupler! The Vendor I ordered from was Croft Trailer Supply in Kansas City, Mo. Ended up myself, @rideandfly and @John Dorrer purchased the (3) they had in stock. If it’s an upgrade you’re considering you may not want to wait. Safe Travels! Hull#634 XPLOR

Did this yesterday on a dual tank regulator used for a commercial grade griddle, which I modeled after the setup on the Oliver. I tapped several times gently with the handle of a crescent wrench in a few locations and viola, the fuel level indicator started working! It’s also important to open propane tank valves very slowly to keep from tripping the internal safety device that could shut off gas flow.

Hope everyone has a great holiday! 250 years is a pretty good run. Based on some of the videos from the World Cup attendees visiting the US for the first time, we seem to be the envy of the world! Mike

I think a lot of us with older trailers have the cracks.

This sucks all the way around. I wonder what percentage of Oliver owners have this problem.

Final Verdict - NO Go on Door Core Replacement. After buying and trying to replace the door core *which Lippert said should be an easy fit, I have bad news. The new door core when installed was out of alignment by about 1/4" even though we meticulously measured and remeasured the placement of the holes for the hinges. I reinstalled the old door and it fits perfectly fine and I'll be doing some re-taping of the ugly cracks. It appears perhaps the event that triggered the start of cracking may have also bent the hinges just enough that they no longer fit for a new perfect door. Oliver has suggested that the best action is to drill out and replace the full door and frame. (Back to the $1600 cost and I will consider having Oliver do a full door and frame replacement when I go back for factory service this fall.) The new door core has brand new latches, new windows etc. If anyone else needs a door core let me know as it's NOT returnable. I could bring it to the rally or keep it as a part's door for the window and door latch. By the way, these door cores are constructed by laminating together the outer skin, and inner skin with glue which is also used on the edge channel of the door. So you cannot simply pull out the core of the panel and swap into the old door frame. So much for saving money on the repair. Craig

Welcome. Ask Away. Hull #1045, Jolli Olli

@Boudicca908Thank you. If you order the MEGR 253 I think it comes with straight inverted flare fittings installed in the inlet connections. You should be able to connect your current pigtails to these fittings if you don’t want to convert to the 90 degree inlet fittings. You will still need pipe sealant or tape to attach the 3/8 inch fitting on the supply hose from the trailer to the outlet connection on the bottom of the regulator. If you get teflon tape be sure it’s rated for use on propane and natural gas. It will probably be yellow. Most Teflon tape you see is for water and air. Before applying new sealant or tape be sure to clean all of the old sealant or tape off of any reused male or female pipe threads and don’t let any of it fall into the regulator or hoses. If using teflon tape start the tape just shy of the end of the male threads so it doesn’t obstruct the opening and wrap it in the same direction that you will be turning the item with the female threads. I’m afraid that my instructions seem intimidating but this really is an easy project. Bill