All Activity

I hope this issue has not previously been addressed on the forum. I could not find anything on this topic with a search. So, here goes. I have always assumed that the fresh water tank in our 2022 Elite II could be filled until water flows out of the overflow tube underneath the fridge, regardless of the fresh water sensor reading. This approach is recommended on p. 61 of our 2022 Oliver Owners Manual: "fill until water starts to run from the freshwater overflow..." I have regularly done just that with no issues--until a few days ago. When filling the fresh water tank, the aisle floor bulged upward, the entire trailer shifted to the curb side binding the door, and then, with a loud CRACK, the backsplash on the sink side of the galley countertop separated by about 1/2" from the fiber granite countertop, because the corner of the countertop near the sink was sloping toward the curbside! After we recovered from the shock, my wife and I immediately ran fresh water (via the pump) into the gray water tank through the galley sink until the trailer shifted back into equilibrium. Fortunately, this enabled the aisle floor to level out again, the door to unbind, and the countertop to slowly rise up again to meet the backsplash, so the two once again line up. When we get home, I plan to re-caulk the joints that separated, and carefully inspect for any additional damage. So far, all appears to be "back to normal" while we continue our extended trip. Lesson learned: despite what is recommended in your Owners Manual, monitor the fresh water tank level when filling, and once the sensor reads close to 100%, SHUT OFF THE WATER! DON'T WAIT FOR WATER TO FLOW FROM THE OVERFLOW TUBE!

Picked up our Apex two weeks ago and have been in it every night - so far, so good. We planned to spend 3 weeks straight to learn and work out any bugs (very minimal issues so far) Pros - A dream to tow & bike mount has been solid/Eco flow display easier to learn that anticipated/battery re-charge amazingly fast/Houghton AC quiet and have ran all appliances (simultaneously) and some “faux” boondocking on the 48 volt DC system w/ no issues. It has been wonderful to arrive at the campsite with 98% battery every time. Overall love the attention to detail and quality of the design. Dinette cushions (backs) could be improved and wished they would have included the solar suitcase connection. Cons: Black/Gray tank indicators don't really warn you of a full tank, but the toilet gurgling and the shower backing up are sure indicators 🙂 I haven’t attempted filling the fresh water tank yet (to be honest I am intimidated by the multiple valves under the bed - wish they were labeled but thankful for the poster size diagrams on the compartment cover. Our background: Previous tent camper, then a Casita circa 2000s, and Airstream owner. So far impressed with the Oliver overall operation (Airstream could learn from Hohenwald orientation and pick up) and while tempted by the new Casita double axle trailer (significant price difference) the Apex is a well designed trailer and we have no regrets.

i did find the fuse but unless the fuse is bad i flip it on and off but didnt seem to solve the DC power problem i. the trailer. i don’t have a meter to test the fuse.

ii am at a camp site. tomorrow i will look for this.

i am at a camp site. tomorrow i will look for this.

My 2021 model has a 12V 60A circuit breaker under the street side bunk.

the ac power is good microwave is working and ac outlets but no lights and refrigerator and ac not coming on

oliver 2 year 2020

Which year and model of Oliver are you asking about? Mossey

ac shore power turns on microwave and turns on outlet but not lights. i know there fuse blown somewhere but where?

Todd B - If you are still in the Teton area be sure to look up "Elk Ranch" road. It is located north of your campground, is on your right as you travel north and is easy to get into and out of even when towing your Ollie. Great views of the Tetons are available here without dealing with 5,000 of your closest friends. Also, Dornann's is a good place for a decent pizza - located just north of the airport. Safe travels! Bill

Dean & Mary - Re Rallies: In a recent conversation with Aaron Wolters at Oliver he told me that he is working on and is interested in "regional rallies". If you would be interested in helping organize such a rally in your area, I'd suggest that you get in touch with Aaron. There are and have been a number of these regional rallies - the New England area, the Texas rally and the Florida rally all come to mind. Therefore, any organizer would not have to re-invent the wheel to get it done. Bill

Wrapping up a week in Grand Tetons. Gros Venture is the campground and the fall colors, even though we were a little late, delivered! Also, thought I would post some solar number as some of these days it was really pulling in some good numbers hitting almost 350w out of a 400w panels one day. Another 6 days discounted, running invert most the day with Starlink and laptop and even some small microwave use. Batteries are sitting at 70% still.

I just upgraded from a 2" Bulldog hitch to a 2‑5/16" hitch. Thanks, Patriot, for the information and the link to the Collar Trailer Hitch Lock for Bulldog‑style Couplers. I just placed my order, and it will definitely help with security while towing, since the wire that holds the collar offers virtually no real protection. I’ll be using a Proven lock on that collar so it matches all my other Proven lock keys.

When we are driving it just sits on the dash. When at camp we just put it wherever we can get a decent sky view. Plugs into our Elite on the outside and with the long power cord it’s easy to work with. It’s a great thing to have for so many reasons

We live in the mountains about an hour from Denver off Highway 285. We hope to attend a big rally someday if one is held close to Colorado, and a smaller regional rally would definitely interest us as well. Thanks for checking out our signature line about the equipment upgrade. I’m still working on it and hope to have everything wrapped up soon. Once it’s finished, I’ll put together a full write‑up and share the process. And yes—I agree that an Oliver‑offered Victron upgrade would definitely appeal to buyers. Dean

Sounds like a great adventure! Welcome!! Mike

Welcome to the Oliver family! Nice looking trailer - enjoy!! Mike

That Power Foam Turtle Wax bug remover gets high ratings. Once you get your ceramic coating done you will find that the bugs are a bunch easier to remove. CGI (that Patriot mentions above) has a product that will also aid in bug removal while enhancing and adding to the life of your coating - I believe that "Ceramic Shield" is the name. Bill

Pending your ceramic coating 🙂....a great / inexpensive option is Turtle Wax 50595 Power Foam Bug & Tar Remover. Interesting video here from Dallas Paint Correction. I am sure there are better products, but maybe not for the price and the foaming dwell time. As mentioned in the video, good for bugs horrible for tar. Citrol also works but is a harsh chemical. Just a thought!

A professional ceramic coating will allow those bugs to wash right off with a PH neutral car wash soap. We had our Oliver ceramic coated by CGI and they did an outstanding job. 🌟🌟🌟🌟🌟 Highly recommend! https://www.cgidetailing.com/

Congrats and wishing you all the very best on your adventures. Don’t forget to chock the front of those trailer tires! 😊 Welcome to the Oliver family! Patriot 🇺🇸

The long wait is finally over!!! 2Dreamin has a new beginning, those planned and those that are unexpected on the road or off the road we are Apex ready. Come along with us on our journey to see what is just around the corner. Click on the link, subscribe and ring the bell to get notifications when a new video or short is uploaded to our YouTube channel. Hull #1738 https://youtube.com/shorts/gxLY7IRslJo?si=UfrcGxzsi_Mkrd0V

As a first step, i wash off with alot of sudsy soap water and sponge bath, letting it soak the bugs, then go bug and tar remover for the relatively few that persist.

Can anyone connect me? I lost their contact info. They had just had some major changes/additions to their electrical set up. It was done in Lebanon, TN. Thanks, Pat, #1189