Leaderboard

Update:. Coy Gayle posted an update on Steve and though prayers are still needed Steve has started his road of recovery. 🙏

About four years ago I found Oliver and these forums while browsing the Airstream forums looking for our 1st Travel Trailer (some tenting camping). The next four years consisted of mostly reading these forums, sending for brochures, to "unofficially" spec'ing out ours (dreaming), to using the referral program to see one in person, and to finally scheduling a tour this past Monday. I was impressed with the detail and thought that Oliver puts into these but not surprised since so many on here had prepared me without any of you knowing it. We sat down with Jason and went thru all the options then the question came, "do you want to secure a production date?". I couldn't have been more happy to tell him absolutely. So we now have a delivery date next July (15th I believe). We are newbies to the travel trailer scene and look forward to meeting many of you over the next few years. I will continue scouring these pages to help me finalize the options before April and to help prepare us for alittle life on the road.

Welcome! Please be confident that you made the right decision. It's a big investment but a safe investment. On one hand if you have a sudden change in circumstance in future, you'll be able to sell your Oliver with very little depreciation. On the other hand, as you can see from many of the "seasoned owners" on the forum, you can use the heck out of the trailer and not worry about anything falling apart as it would on any other brand. Plus the excellent customer service from the factory. Plus this incredible resource on the owners forum. It's a win-win! All you have to do now is think of all the great places to take your Ollie.

We took delivery of our LE2 Twin Bed model, hull number 894, on September 16th. We stayed at the Oliver site the first night, then on to David Crockett SP for one night, then three nights at Fall Creek Falls SP, TN. After torrential rains enroute to Fall Creek Falls SP, followed by three days of nearly constant rain (got to know the inside of the trailer really well), we bailed on our plans to continue eastward to Great Smokey Mountains National Park, where three more days of rain was forecast. We decided to head back to the Oliver mothership to have a couple of issues dealt with before wending our way westward to Northern California. Our screen door latch failed, a first according to Jason. I removed the catch so we could open the door without fear of being locked in or out. The latch was replaced and has since been behaving. One of the Andersen WDH frame clamps moved, allowing the attached chain to become slack. The problem was traced to a cross-threaded set screw, which gave the impression of being tightened enough, but it was protruding from the frame clamp much more than the set screw on the other frame clamp, which should have been a clue to the installer. The frame clamp was replaced with no issues since. Within a week of delivery, I noticed that the caulking around the rear streetside window had yellowed, while the caulking on all other windows was still pristine white. I assume that during production someone ran out of caulk and grabbed the wrong kind. While only being a cosmetic issue, it still bugged me, and I will re-caulk that window when all others need to be caulked. We have the Suburban water heater. Ten days after delivery, while opening the water heater door to turn the heater to electric mode, one of the sheet metal screws holding the door hinge fell out, apparently having been stripped during assembly at the factory or installation at Oliver. The missing screw allowed the forward part of the heater door to open almost half an inch. I felt fortunate that a gust of wind didn't rip the door off completely while underway. I used some white duct tape along the bottom edge of the heater door to act as a hinge, which held for the rest of the trip home. The apparent fix is to replace the missing screw with a larger one. Unrelated to an Oliver issue, I brought a TireTraker TT-600 TPMS system with us so we could have an easily installed TPMS system for the long drive home from Hohenwald. While marinating in the rain on our third day at Fall Creek Falls SP, I noticed that one of the trailer tires had gone from 55 PSI to 36 PSI overnight, with no obvious source of a leak. Rather than changing the tire in the heavy rain, I just inflated it to 70 PSI and checked it periodically the next day on the way back to Hohenwald. The tire held pressure, but I asked Jason to have the tire removed and check for the source of the leak. It turned out to be the TPMS sensor, and not an object in the tire. I replaced the leaking sensor with a spare (I bought 6 sensors), but it leaked audibly, no soap spray needed to find it. Next, I removed the sensor from the spare tire to put on the rolling wheel, and all was good. I will contact TireTraker to resolve the leaking sensor problem. Our Ollie got it's first bath today. While washing the roof on the streetside, I discovered that there were three loose stainless fender washers laying by the middle awning mounting bracket. Also, a few feet away there was a quarter inch chip in the roof gelcoat. Kind of disappointed in the quality control. I need to contact Oliver to find out how to fix the gelcoat chip. Other than those relatively minor issues, the Ollie is very comfortable and tows easily behind our RAM 1500 EcoDiesel, with no sway when passing or being passed by big rigs.

One 16 oz bottle should be plenty, I typically use a little over half. It doesn’t require a heavy application. Proper prep is critical, you must get off all the old wax and any bugs, sap or tar. I suspect that the bad reviews come from folks who did not prep adequately. John Davies Spokane WA

This, I like - I never cared much for Oliver's sink and faucet choices and I'd actually planned to supply them a sink and faucet to get installed on the line. Unfortunately the one I wanted wouldn't work and I was having trouble getting the proper dimensions from Oliver, so I just let it go and figured I'd replace it later. Well, that was a good idea until I realized that the cutout Oliver made for the sink was way too big for any of the bar sized sinks that I could find. And all of the full sized kitchen sinks were too big to fit. But finally I stumbled across this oversized bar sink from Franke. It's the 17" Franke Vector. Overall, it's the same width as the existing sink, but the lip is narrower, so the bowl itself is a bit wider. Mainly the sink is much longer and deeper. In overall volume, it's over twice as large as the original sink, but takes up no more counter space. Can't beat that. And because it's farther forward and 3" deeper, it doesn't splash all over the place like the original. In fact, I can even turn the faucet up all the way without it splashing over the front of the sink, which is novel. I like the Franke sinks in that they have the straight sides and look of a modern zero radius sink, but they do add a slight radius to the corners so that you can actually keep them clean. Installation wasn't too hard. I'd rate it 7/10. The difficulty was that I had to modify the base cabinet for it to fit. There's a wood brace running across the top front that is screwed to the fiberglass beneath the drawer trim, which had to be cut out, and also a portion of the left side of the cabinet. That sounds like a lot of structural support to remove, but the cabinets are mainly tied in at the bottom and I ran it past Jason beforehand to make sure I wasn't looking at it wrong. I have to say that the cabinets are stoutly built, and I'm not at all worried about it. The second problem I ran into was that my countertop wasn't perfectly flat. It bowed down in the middle slightly which wasn't apparent until I installed the sink. But I was able to temporarily shim the counter against the top of the cabinet while the silicone seal dried and then I glued PVC blocks around the perimeter of the sink to both hold it in place and to level the counter. The Franke sinks have an odd installation clip that wasn't designed with hollow core fiberglass in mind, so the blocks were necessary anyway. It's not going anywhere now. Of course I lost use of the flip out drawer but I hated that thing anyway. I glued a few ½" blocks to the front of the sink and then fixed the drawer front to the blocks with heavy duty velcro, just in case I ever need to remove it for some reason. The sink depth worked out perfectly with the existing cutout on the back of the middle drawer to clear the drain. I thought I was going to have to get a Hepvo trap to make it all clear but Oliver actually places the trap behind the cabinet, so no problem. I did have to get the narrowest profile elbow I could find to attach to the drain basket, so I had to go with cheap plastic rather than PVC, but such is life. At the end of the day, however, I decided to use a different drain basket that was a bit deeper, so I had to make the drawer cutout about a half inch deeper after all. The faucet is a Grohe that I found on sale at Home Depot for about half price, so that was a nice find. It has a really nice feel to it and unlike the sink, was a cinch to install. Grohe has a trick installation method that allows you to work from above so that one person can do it without crawling under the counter a hundred times. Oliver's hot and cold lines are convenient to get to and there's an access panel in the back of the cabinet that can be removed if you need more room to work. The only issue I ran into was that the counterweight for the sprayer was getting caught up on everything that's packed in the back of the cabinet. To fix it, I made a tube from some flexible plastic sheeting that I had lying around and just slid that over the sprayer hose. Now the hose slides easily inside the tube and as a benefit, the weight won't bang around inside the cabinet while traveling. So that's about it. I've learned that I don't have the patience or foresight to take progress pictures Like John does, so my description will have to do. But I'm happy to answer any questions.

That looks terrific! Nice job.

Congratulations!!! We take delivery in 9 days! I didn’t think delivery would ever come. We ordered last February. I spent a great deal of time going through Oliver University. I highly recommend it if you haven’t already. As you already know, this forum is the best. The people on this forum really go the extra mile and help however they can. Congratulations again and enjoy the process. Carl

Ha ha! No dumb questions. For sure. It's one of the first things I looked at when I wasn't getting the expected results. You know what I didn't check though? If the hose or the filter on the inlet port somehow clogged after getting enough fluid to flush the cold in the kitchen. I will have to check that when I get back out there today. I can't imagine how it could have since the hose is quite short and was inserted directly into a fresh A/F bottle but...

Our thoughts and prayers are with them both.