Mcb

Do you have the Bluetooth app for the inverter? If so, by turning the “Charger Ignition Control” switch on (#26), you can disconnect the charger from the batteries… it’ll take care of the inverter noise as it stops it from constantly trying to charge the batteries. There was a thread a while back in which NCEagle brought this strategy to light. I’ve been doing it ever since and it works great.

Good thing you had a third camera to document the event…. You really do haul around everything imaginable in triplicate in that big ol truck of yours🙂

We’ve used metal pans, and aluminum foil…never had an issue. One of our favorite things to do with the convection oven is to cook things like chicken pot pies, or lasagna, or other wonderful things like that from farmers markets or the like while on the road…. No prep work, not much clean up.. Sometimes the best cooking is someone else’s cooking….

Teri, the inside dimensions of the oven are 12”x 12” I think. We have a glass square pan that fits in there and spins around with no problem…nothing fancy, just something that doesn’t mind if the oven suddenly needs to get used as a microwave..

We have the curbside awning with wind sensor on our 2020 E2. The sensitivity can be adjusted, so as to keep the awning from “ over reacting” to light breezes of you desire. There have been occasions when I’ve disabled it, and we’ve deployed poles and lines to anchor down the leading edge of the awning. I do wish the awning had the legs built in to it like the older ones do. We tend to have the awning out often unless the wind is, or will become an issue. I’d consider adding a street side awning to our trailer if I could find a manual one with the legs and optional anchor points located on the side of the trailer, seems like a good source of shade for the windows on that side.

That’s a pretty amazing list of accomplishments..big and small.

Once schools starts up in Sept things quiet down a little, but then of course the leaf peepers start to arrive in October. I think that September through to Thanksgiving is the best time of year in Northern New England. It’s quieter, cooler, fewer bugs.. and absolutely beautiful. The trouble is a lot of campgrounds shut down by mid October. Spring can be pretty amazing too, again, fewer folks around, but the weather can be pretty iffy.. and at some point the Blackflies make their presence known with an obnoxious degree of intensity…… if it were me driving here all the way from Texas, I’d aim to be around here between mid Sept and the beginning of Nov. and Id focus on Western Maine, NH, and VT… it’s a pretty time of year in the hills and mountains of that neck of the woods.

Lol, it took me a minute to figure out what you were talking about…yup, I like hammers. Depending on what I was doing with it, any of the four with wooden handles in the upper left were my favorite.. They were made by an outfit named Douglas Hammers… I’m not sure they are still around.. somewhere on this forum there was a thread about stakes for tying down awnings (I think) and one of the suggested products came with a really cool looking hammer which I may need to pick up sometime… I bet Overland got one… or maybe two..

Well the project I’m working on isn’t quite as cool as yours that’s for sure, and is just getting underway.. but I thought I’d share.. All the potential storage space around the propane tanks has been nagging me for some attention… It just seems like a perfect place for things I don’t need very often but need a dedicated place to be stowed in Dearie. So I installed 1/2” hardware cloth in the bottom to keep stuff from falling out, and have got a couple of plastic “tubes” set up.. one for the grease gun and related stuff, the other for the winterization pump and the like. I’ll stash extra lengths of pex in a 3” capped PVC pipe that will be lashed to the hardware cloth behind the gas bottles, probably along with emergency short term winterization gear. I already have a garden hose that I use to flush the black water tank that lives in front of the gas bottle, and there is a fair amount of space in there for “something”… just gotta figure out what that something might be.. Judging by some of the older posts on this thread you have a very cool shop John, resulting in a small pang of jealousy on my part, though I’m not complaining about my workspace…. Dearie in the dooryard.. working out some storage solutions…

We have a Highpointe in our 2020 E2… We cook all the same stuff with it that we do at home without an issue.. .. chicken, pork tenderloin, eggplant parm, you name it. Haven’t ever tried jamming a Turkey into it.. it would have to be a pretty small bird …

I figured out one of mine was loose because it was spraying water when I hooked the hose to it… didn’t have a 1/2” Allen wrench at the time, but I do now.. any project requiring a new tool is a good one as far as I’m concerned. 🙂

2016 Tundra with cap…. E2. On the trip back and forth across the country this year we got 12mpg westward bound, 10 mpg eastward bound. The difference in mileage is very noticeable when traveling under 72 mph as opposed to a faster clip..

If it’s worth doing….. it’s worth over doing..

Oh boy! I need a few of those!

I’ve been pondering this question since it appeared. While not entirely clear on what qualifies as a gizmo, I’m pretty sure I’ve got a fair number of them. Still, it’s hard to pick a favorite.. But while replacing my very tired old Milwaukee Cordless wet/dry vac today I realized that this is my favorite gizmo.. for the truck, the camper, for dealing with disasters like the time I sort of flooded the Casita years ago…

So…this may not apply… but it’s a thought. Our fridge (2020 E2) had issues from the get go.. worked great on AC, but was fussy when running on gas. There was no rhyme or reason to it, sometimes it worked fine, but would shut off for no reason, sometimes it wouldn’t ignite. It didn’t matter it we were stationary, moving, level, or parked hanging off a cliff… sometimes it worked … sometimes it didn’t. In the end the issue was that the igniter wasn’t spaced properly, the gap was way to big.… see pg 12 in the Norcold N41X manual.. It was an easy fix. might be worth a look..

It’s true.. there is a lack of East /West routes across northern New England.. if you want highway driving you’d have to go back down to Portsmouth NH, then head north into NH or VT. if county roads are what your looking for…get yourself to Augusta, then work your way to RT 2.. this gets you through the western part of the state, into the White Mts of NH and over to VT.. very very pretty drive, and a good cross sectional view of this part of the country IMHO…

I like the idea of the hydraulic pedestal… hadn’t thought of that.. replacing the tabletop is on our list as well, and while I could built one, I’m keeping my eyes peeled for an old wooden tabletop with interesting grain patterns or wood species that I can repurpose.. I think I want to make it a few inches longer than the stock Oliver table..

Mike, you’d been looking for recommendations for campgrounds in Maine a couple weeks back... Lobster Buoy Campground should be on your list of potential places. It is a nice no frills little campground in a beautiful location in the Midcoast... If you ended up staying there and put the word out, you might find yourselves surrounded by local Ollies, as in the photos above...

Original cushions and foam toppers have worked great for us.. wasn’t expecting them to but figured we’d give it a try.. glad we did.

We all owe you and Dewdev a big ol’ thank you for putting it together. Deb and I had a blast, and will figure out how to be there from start to finish should there be another event in the future.

If you end up heading north ( or East) of Acadia, and the border has opened, I highly recommend a trip out to Grand Manan Island in New Brunswick. It’s probably 3 hrs further along to where you pick up the ferry, so it’s not that far. The ferries run back and forth all day ( the trip is an hour, maybe hour and a half) and there are two campgrounds out there... I don’t know what you’re looking for, but there are beaches, whales, birds, rock hounding, endless cliff top hikes along the ocean, the 26 foot tides of the Bay of Fundy to marvel at.... lots of good stuff. it’s a pretty cool place to visit. We may try to make reservations for a week in July just hoping that the border opens by then.

Lamoine State Park is located close enough to Acadia for day trips but nicely outside the fray. Cobscook Bay State Park is way Downeast, and a nice place. If the border is open its close to Campobello Island which is worth a visit. I guess the question is are you looking to spend time along the coast, or looking for forests and mountains... we got both.. New Hampshire is pretty nice too.. don’t overlook the White Mountains.. . We’ve got space a little further north from Mainiac where you could land if need be as well ..

We’re looking forward to it!

Yup.... it’s 603-332-6398... call or text..