-
Posts
5,286 -
Joined
-
Last visited
-
Days Won
217
Everything posted by Mike and Carol
-
The nearest Oliver dealer to me is a 2 hour drive. I am more likely to go to my local RV repair shop just 10 minutes away. This RV repair shop does work on several local Olivers. An owner, with one of the original Elite’s, found this shop and recommended it to other local Oliver owners. In order to compile a well populated ownership registry someone is going to have to use social media assets, this forum and the FaceBook pages, to ask for data. Also, if you want to find out if someone has found a closer-to-you repair facility, the same social media needs to be used to find out. If there isn’t one, then someone will have to do the research to find one and then share it with other local owners. If you are going to the rally, you could ask here or on FaceBook if there are other owners from your are also going, then do a meet up to establish relationships and exchange data. There are a couple of San Antonio owners that we only see at the rally in Alabama! Mike
-
Something I dream about!
-
Made in USA leaf springs
Mike and Carol replied to Mountainman198's topic in Mechanical & Technical Tips
I’ll get mine installed in 2 weeks then off to East Tennessee for a week or so before the rally. I’ll also tow forward and observe. -
Made in USA leaf springs
Mike and Carol replied to Mountainman198's topic in Mechanical & Technical Tips
I haven’t asked for a break out for the different replacements/installs. -
True, but our Oliver’s could surely withstand more “tree” impact than a sticks and staples!
-
Made in USA leaf springs
Mike and Carol replied to Mountainman198's topic in Mechanical & Technical Tips
My ALCAN springs arrive tomorrow. Oliver service will install them when I have them do the shocks, bearings and brakes in two weeks. New information is always good. -
Electrical Awning reinforcement
Mike and Carol replied to rich.dev's topic in Mechanical & Technical Tips
Nope, nope. -
Brand of metal valve stems
Mike and Carol replied to StillGame's topic in Mechanical & Technical Tips
We’ve used TST and metal stems for the last 7/8 years or so and a lot of miles, no issues. Mike -
Wet Bolt Size Help Requested
Mike and Carol replied to connor77's topic in Mechanical & Technical Tips
An option would be to open a ticket with Oliver service, they should know exactly what was installed on Hull 832 and then ship you what you need. Mike -
What are you listening to? Video Thread
Mike and Carol replied to JWalmsley's topic in General Discussion
Rambin’ man…. -
At the rally ask me about our flood experience and the 2am evacuation!
-
Here’s an interesting article on what to do in a lightning storm. They say metal RV’s are safer than all fiberglass RV’s. They also give some other advice. I’d be interested in what the consensus is on what everyone does during storms. Mike Lightning Storm Precautions
-
Day/Night Window Shade Questions
Mike and Carol replied to rideandfly's topic in Mechanical & Technical Tips
John, as Bill has shown, it can be done. I had two blinds on the kitchen counter for several days as I did the re-stringing thing a couple years ago. One came out fine, the other one I had too tight which made it difficult to raise the lower shade. Had to loosen up the strings a bit, now it’s fine. Just plan some time and be patient! Mike -
It’s a rite of passage for a lot of owners!
-
Shower faucet low water pressure
Mike and Carol replied to Imelda's topic in Mechanical & Technical Tips
Trainman sold his trailer and hasn’t been active on the forum in a while. -
Made in USA leaf springs
Mike and Carol replied to Mountainman198's topic in Mechanical & Technical Tips
Mine are 3” wide and 9/16” diameter. Mike -
I get the daily RVgeeks newsletter email and this morning had an article on Oliver trailers. It looks pretty well researched. RVgeeks Oliver Article Mike
-
We’re not camping but are only about 45 minutes from where most Oliver campers are and we live in the path of the eclipse. Unfortunately, it’s pretty cloudy. I can’t even see an outline of the sun through the clouds. Hope it clears up some in the next hour, otherwise there will be disappointment in Texas Hill Country!! Mie
-
Made in USA leaf springs
Mike and Carol replied to Mountainman198's topic in Mechanical & Technical Tips
I ordered a set of springs this morning. I was the second order they had this morning. Lou said they’ve had 4 to 5 orders a week for a while. They now have an Oliver Kit that includes springs, U bolts, shackles and wet bolts. Mike -
Same here. Not difficult to swap out. The light is nice. I think you’d be fine without the rain guard. Mike