Jump to content

Recommended Posts

Posted (edited)

Hello everyone; just a quick intro to say hello and to advise that I've joined the Oliver movement. I took delivery of a new-to-me Ollie LE last weekend; a barely-used 2022 model which the previous owner loaded up to the gills with all of the available bells and whistles. I was really fortunate to find it, and I demonstrated my interest by immediately flying to Florida from Texas two weekends ago to view it and subsequently "claim" it. I brought "Zuni" home last weekend, and now I'm going through the same growing pains as everyone else in trying to learn all of the on-board systems. So far, so good (other than that annoying water heater recall, for which parts are back-ordered for). I look forward to putting her on the road in another week, and I already have several long-haul trips planned for April and June. Stay safe, everyone!

 

Edited by Jay T. Norcross
  • Like 6

2025 GMC AT4 | 2022 Oliver Legacy Elite | Hull #1016 | Houston, TX

 "Zuni"

 

 

 

travel trailer units for sale
Find Oliver Travel Trailers for Sale
New Travel Trailers for Sale
  • Moderators
Posted

Hi Jay, welcome to the group and congrats on your “new” Oliver!  You probably know about the Texas Oliver rally that’s in the fall.  Hope to meet you there.  Mike

  • Thanks 1

Texas Hill Country | 2016 Elite II #135 | 2020 Ram 2500 6.7L

ALAZARCACOFLGAIDILKSKYLAMDMSMOMTNENVNMNYNCNDOHOKSCSDTNTXUTVAWVWYsm.jpgALAZARCACOCTDEFLGAIDILINIAKSKYLAMEMDMAMS

  • Moderators
Posted

Jay - 

Welcome to the Family!  

If you have not already been there it is in your best interest to become VERY familiar with the Oliver University - which can be found HERE.

Being from TX it is a fair drive to get to Hohenwald, TN, but, if you can make it there and/or to the Annual Oliver Owner's Rally it would be time well spent.  And, of course, there is the TX Owner's Rally that Mike mentions above.

If there is anything that we can do for you - just ask!

Bill

 

  • Like 2

2023 Ford F150 Lariat 3.5EB FX4 Max Towing, Max Payload, 2016 Oliver Elite II - Hull #117 "Twist"

Near Asheville, NC

Posted

Welcome to the forum and congrats on your new to you Oliver. Hull #634 XPLOR.

Safe Travels!

  • Thanks 1

ALAZARCOCTDEGAIDILIAKSKYMEMDMAMOMTNENHNM

2020 OLEII - Hull #634 aka-  “XPLOR”

TV 2021 F350 6.7 liter Diesel Lariat Ultimate Tremor aka - “Beast of Burden”

Retro upgrades - Truma Aventa 13.5 AC, Alcan 5 leaf pack, Alcan HD shackles & HD wet bolts, 5200lb never lube axles.

XPEL 10 mil PPF front both front corners, 30 lb LP tanks, Sea Biscuit Front Cargo Storage box.

North Carolina 🇺🇸

 

Posted
3 hours ago, John Dorrer said:

Welcome and congrats from Hull # 1045, Jolli Olli.

Hulls # 1016 and 1045, no offense please, but y’all are pretty much kissin’ cousins!

Your systems both 2022s, the installations should be very close, and Jay, John D can be a great resource for you. Welcome!

  • Like 3

Chris & John in Prescott, AZ | 2016 EII #113 | '01 Ram 2500 Cummins!

  • Moderators
Posted

Welcome  from hull #12, 2008. Hoping you enjoy your Ollie as much as we have for 17 seasons.

  • Thanks 1

2008 Ram 1500 4 × 4

2008 Oliver Elite, Hull #12

Florida and Western North Carolina, or wherever the truck goes....

400 watts solar. DC compressor fridge. No inverter. 2 x 105 ah agm batteries .  Life is good.


        
 

 

 

Posted

Thanks everyone, for the warm welcome. I wasn't aware of the upcoming rally but I'll be looking into it now. 

2025 GMC AT4 | 2022 Oliver Legacy Elite | Hull #1016 | Houston, TX

 "Zuni"

 

 

 

Posted
On 2/5/2025 at 3:38 PM, topgun2 said:

Jay - 

Welcome to the Family!  

If you have not already been there it is in your best interest to become VERY familiar with the Oliver University - which can be found HERE.

Being from TX it is a fair drive to get to Hohenwald, TN, but, if you can make it there and/or to the Annual Oliver Owner's Rally it would be time well spent.  And, of course, there is the TX Owner's Rally that Mike mentions above.

If there is anything that we can do for you - just ask!

Bill

 

Hello Bill. I've been stalking Ollies for years, and I (finally) visited the factory in Hohenwald over the past Thanksgiving holidays while visiting friends in Hendersonville (just outside of Nashville). Fortunately, with OTT's use of third-party dealers now, I have an authorized repair facility about 10 miles away from me. I don't imagine that would ever be as good as returning Zuni to the mothership, but in a pinch, I'll consider using the local rep. Thank you for your offer of assistance!

2025 GMC AT4 | 2022 Oliver Legacy Elite | Hull #1016 | Houston, TX

 "Zuni"

 

 

 

Posted

@Jay T. Norcross - Greetings, Jay and welcome to the OTT Family...  As an admitted "stalker for years" you'll already know how useful these forums are for challenges you may experience and how much exceptional camaraderie they provide.  Welcome Aboard, from Casablanca HULL #226!

  • Like 1

Art, Diane, Magnus & Oscar (double-Aaarrf!)

  • 2022 TUNDRA
  • 2017 LE II; Hull #226 "Casablanca"
  • HAM call-sign:  W0ABX

ALAZARCOIDLAMSMTNMOKTNTXUTWYsm.jpg

Posted
On 2/5/2025 at 3:38 PM, topgun2 said:

Jay - 

Welcome to the Family!  

If you have not already been there it is in your best interest to become VERY familiar with the Oliver University - which can be found HERE.

Being from TX it is a fair drive to get to Hohenwald, TN, but, if you can make it there and/or to the Annual Oliver Owner's Rally it would be time well spent.  And, of course, there is the TX Owner's Rally that Mike mentions above.

If there is anything that we can do for you - just ask!

Bill

 

Hi Bill. Thank you for the recommendation. Part of my due diligence prior to pulling the trigger on Zuni was practically wearing out the Oliver University site, along with YouTube, and watching video after video. There are tremendous resources available in both places, and I'm sure I'll continue to visit them frequently. Cheers!

  • Like 3

2025 GMC AT4 | 2022 Oliver Legacy Elite | Hull #1016 | Houston, TX

 "Zuni"

 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...