HDRider

Funny you post that. Last summer my AC was dripping down the front street side corner. Oliver blamed that on the angle of the trailer. Something is fishy.

That sure sounds like the problem.

The nose was down. I raised the nose and the leaking stopped. I find it concerning that the angle of the trailer, ever so slight, could cause this.

Our Oliver is a 2023 with the Truma AC. If you live in the south you know how hot and humid it is right now. I turned the Truma on about noon today. I went out just now to turn the AC off and water was leaking like crazy inside luckily falling squarely in the aisle and not on the twin beds. Does anyone know why this is happening? It has never happened before. I routinely run the AC when we are home and the Ollie is docked. Thanks

I ran across a guy from Texas with an Elite II that made some out of wood. I came back and made some. I have been using them this year.

I wonder why no one sell a wheel chock that fits snuggly between two wheels made out of resin or heavy plastic shaped like If you have access to an injection molding machine and want to make me a pair I will pay you.

Can you provide a link to where you got them? Or, a part number and the manufacturer? They look great

We meet a couple from AZ at the Buck-ees in Amarillo. We saw another Ollie going west on 40 about 3 hours west of Oklahoma City. Our Ollie count during our 7,000+ mile trip was 3.

Great idea!

We talked to a young man working at the ice cream place across from the statue. He said on a slow day maybe 300 people take a picture of it. The power of one line in one song!

Sitting in our Ollie with the AC blowing it is 96 degrees outside. Another Oliver is setting up across the campground. About the only time to sit outside is 5 AM.

Anyone use these? I think they are the new Oliver standard. https://www.amazon.com/Homdec-Interior-Lighting-Surface-Dimmable/dp/B097SKPXSC?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=A1CK9LI16C4XW1&th=1

My stove one is acting exactly like your sink one. My sink one was acting up, but it seems to be fine now. I don't use the other touch lights very much. Thanks for the link. Those seem to be the very thing I was looking for.

Am I the only one having problems with the touch lights?

Thanks. I contacted Oliver via e-mail and got this. The price has went up and the services has went down. Maintenance Performed Inspect & Clean A/C Includes cleaning coil & filters, removing debris, test operation, & check drain system Pressurize Plumbing & Inspect Includes leak testing Fresh & City water inlets, water lines, connections & fixtures. Inspect & Test Water Heater Includes visual inspection of fixture connections & operation Inspect Anode, if equipped Inspect LP Line Decalcify Plumbing & Water Heater Decalcify plumbing lines & Fixtures to remove calcium buildup Decalcify or flush Water Heater Inspect & Lube Blade Valves Test operation & lubricate valves Inspect & Lubricate Jacks Test operation, lubricate pivot joint, & inspect gears Repack Bearings, Inspect Brakes & Grease EZ Flex Inspect Brake components Inspect Bearings & Repack Grease EZ Flex zerks Recaulk Exterior Clean perimeter & recaulk joints Apply lap sealant on roof for additional seal for penetration points Perform LP Pressure Test Test LP Regulator for proper pressure & lockup pressure Perform LP Timed Pressure Drop Test Test LP lines for leaks Test GFCI Receptacles Ensure GFCI operation to all receptacles Perform 7-Pin Test Inspect & Test 7-Pin function, Clean Exterior & Grease Inspect Coupler Operation Test & Lubricate Coupler Inspect Axle & Suspension Visual inspection of axle & leaf springs Check Tire Pressure & Tread Depth Inspect & Clean Window Tracks Clean window tracks for proper drainage Charge & Load Test Batteries Clean/Sanitize Fresh Tank

I have two of the touch lights, the one over the stove, and the one over the sink that work sometimes, and don't work most of the time. I want a light with a real switch like the one in the bathroom. I don't want to do anything to the existing light hole. I understand I will need a hole for a switch. Has anyone done this? What light did you use, and where did you get it. Thanks

I plan to take my Ollie to Hohenwald to get the leak fixed, along with a couple of other warranty issues. I do my own maintenance, but I thought while I had her there I'd let the experts go through it. This thing cost a lot of money, and I want my grandkids to use it some day.

I had used their "Contact Us" page. I have not got a response. They rarely answer the phone.

Can someone talk to me about the maintenance provided by the mothership at Hohenwald? What all do they do? Has anyone documented a detailed list of their service? I could not find anything on their website. Thanks

I have come to the conclusion it leaks when the pump runs. Not sure where. I have looked everywhere but under bathroom sink. Not sure why the pump cycled like it did. It has not recycled since I only filled to about 90%. Now it only runs when we use water. Maybe it went into some kind of vacuum spasm when I use the overflow outlet..

I will fill to overflow and see if any new clues show themselves. I guess I'll be taking the trailer to Hohenwald when we get home.

That must be a standard now. Oliver had me take the wood cover off under the kitchen sink. I checked and it was not wet.

We have been on the fresh water tank all day yesterday and all night. It is 7 AM local time Saturday. I filled the tank to 90% and hit the road yesterday morning. We were on FW tank all day Thursday and Friday. We have been on the FW tank now for 3 days. Pump is normal. No leak.

That makes sense.