mossemi

Although my Ollie #193 has the fan in the same location as @topgun2 and @rideandfly I had to replace the original fan due to noise. My fan has an on or off switch mounted in the main switch panel inside the door and a thermostat midstream of the DC power supply before the fan which automatically controls the fan as long as it has the power switches on. Did you find a thermostat in your fans DC power supply? Mossey

👍

That’s the P-trap's job or in the Ollie, it's the one way valve under the kitchen sink topgun2 mentioned above. The bathroom has a P-trap and it creates a block in the vent system with water in the trap. The one way valve under the kitchen sink does the same with a valve. You said you don’t smell it anywhere else in the Ollie, so maybe you are bringing it inside when you enter the door, Mossey

If I remember correctly that’s the reason I went to work everyday! Mossey

Don't forget that the drain vent is above the closet and you would be closest to it while entering the Ollie. Mossey

I would not rely on a detector, if we smell propane, we shut of the tanks and start troubleshooting. Trust your instincts! Mossey

I'm pretty sure that link works just the way the Reno Gazette designed or requested it.😉 Mossey

Krunch and I climbed Star Dune in August of 2009. The 750' climb was like walking in quick sand. It being August, we started climbing before daylight to beat the heat. Mossey

We turn the water pump off after each use. Just a habit we developed over time. With 2 switches, we are never too far away from one. And under the subject of TMI, we don’t flush yellow at night, we accumulate and flush in the morning. We also turn off the city water supply when we leave the campground. Mossey

Adding more solar panels either on the roof or the ground is a more expensive solution, but probably the most practical. Mossey

Was the water running at the base of the dunes? How was the campground, crowded? Mossey

@MAX Burner and @Geronimo John Thank you for putting in the time and effort needed in order to create this suspension spring pack replacement MOP. 👏👏👏 Mossey

@routlawThank you for posting your pictures and camping report. Well done! Mossey

I bought my first Hitchrider for a Toyota Highlander and a utility trailer and I was very pleased with the product. When we decided to buy an OTT, we sold the Highlander and bought a used Toyota Landcruiser. To my dismay, the Hitchrider would not fit the LC. A call to Hitchrider and with some requested measurements, they produced one that fit the LC. Great product and company. I am using the original model with my new truck. Mossey

I was content thinking it was unique! Now that I know it isn’t, I agree. Mossey

FYI, Mossey

Congratulations! Mossey

My 2017 LE2 door looks identical! I do not think wind had anything to do with it, but maybe sun exposure. It has puzzled me for several years and I haven’t really figured out how to fix it. The skin does pull the styrofoam apart, so I’m not sure if replacing the skin is the answer. I am leaning towards applying something to the existing skin, just haven’t figured out what. Mossey

When I was 11, Mickey Mouse was in second place, right behind Bonanza! And Captain Kangaroo was in last place.😎 My dad and his poker buddy’s guarded those cards and chips better than the whiskey and the clothes pins where in use on my rubber band gun! Mossey

I bet my old Schwinn Stingray bike is in there somewhere! Mossey

I wonder when they started using PVC instead of ABS for the drain pipe? Mossey

I find WAGO Lever Nuts are extremely useful when testing or troubleshooting circuits and combining different AWG sizes. So to answer your question, I use the 221-4xx series up to 12 AWG and the 221-6xx series up to 10 AWG. I also use tape on the levers just like I do on wire nuts. Mossey

I often take the outside shower head off of the hose and pump it out. Something else to try is opening the fresh water drain valve on your way home from a camping trip. Although I would much rather water my property than the road. Mossey

You mean it is like the gas gauge in my truck, not the digital information? Mossey

Sorry I didn’t answer that question the first time you asked it. I used a multi tool to trim the top and bottom. My original cutout was wide enough, but not tall enough. Good luck on your project! Mossey