Patriot

@MAX Burner Sano Install, I like it! Let there be light! Patriot🇺🇸

That wood working hobby could lead to a complete a mahogany dinette table, pantry and microwave countertops!! 👍🏻😊 Patriot🇺🇸

Caution flag Wayfinder, no cheating here, just suggesting you use of the search function as many mod topics on the forum have been discussed in ad nauseam. Patriot🇺🇸

Nice work! We never watch our TV, we are too busy sightseeing! 👍🏻👍🏻👍🏻

United States Air Force March 79 - June 92 Served in the Combat Theater of Operations during Desert Shield, Desert Storm, Desert Calm. Truly an honor to serve. Freedom is not Free. Patriot🇺🇸

@rideandfly Yes! this worked really well where we had a little area of the belly band lift. No issues since! 👍🏻👍🏻

Wayfinder, Propane Wing Nut Mod. The forum search window is your friend. Here you go - Patriot🇺🇸

Touch light replacement just completed over the dinette. It’s important to note that the TL’s I have replaced have all been working fine. I do hope Oliver finds a higher quality touch light. These are cheesey at best. Hopefully they will last. Loosen the light cap by turning and remove it. Drill out the existing rivets, cut the white and black wire as close as you can to the old light. This will leave you plenty of wire to connect your replacement. Connect the new TL wires by braiding the wire ends to each respective color. I used electrical tape and heat shrink tubing for the finish. Tuck the extra wire back into the wire opening in the hull ceiling. Install the light base with new rivets and attached the light cap. When using these touch them gently. Don’t ask me how I know. 😎 Let there be light! Patriot🇺🇸 Pics- New light with heat shrink tubing. If for some reason you need rivets you can purchase these at Ace HW. They work fine.

@chiwald Please post your Hull # and TV information in your signature block, it really helps members on here assist you with a solution.😊 Thanks! Patriot🇺🇸

I actually learned that it’s not a rumor. Oliver is moving away from touch lights in the 2024 Ollies and likely beyond. The light will be a little smaller than the present light and from what I also learned won’t allow a retro fit into earlier models. Patriot🇺🇸

@Ollie-Haus Great find! I just happen to be replacing a touch light over the dinette. So I took a photo of it. Thanks for posting the Amazon link as they look petty identical. Probably the same company in China just a different supplier. I purchased (3) spares on our recent trip to Oliver. I hope this replacement lasts! This is the third touch light I have replaced. 😏 Oliver TL Amazons version -

A quick open source answer to your question appears to be yes. https://truckinformer.com/do-ford-f-150-catalytic-converters-get-stolen-frequently/ Patriot🇺🇸

@Wayfinder What do you plan to replace yours with? Patriot🇺🇸

@SeaDawg Here is a little closer photo of the new fiberglass foundation that the Truma Aventa requires given it has a much different foot print than the Dometic. I learned Oliver will no longer allow Truma Service to retro fit Truma Aventa AC’s. Long story short, Truma Service attempted to do the “free” Truma retro fit on an Oliver and the trailer ended up back at Oliver Service for major and very expensive fiberglass repair work. Another reason we wanted our Truma installed only by Oliver. The entire fiberglass foundation you see supporting the base of the Truma is all new. Look closely and you will see 3 tiny weep holes. They are simply there to allow any moisture out of this interior sloped area of the roof. Patriot🇺🇸

Update - Please disregard my request above. I could not locate a company that makes a cover for the Truma Aventa, so I just ordered a custom cover from this company- https://www.coversandall.com/?utm_source=transactional_email&utm_medium=email&utm_campaign=footer The same company that is also crafting my Honda 3200i custom cover. I will post up my review of quality fit and finish of both these custom covers once I receive them. Patriot🇺🇸

We just had the Truma retro fit completed and now would like to purchase a cover for the AC when our Ollie is parked. What’s everyone using? I have not had any luck searching on line. Suggestions? Nothing listed here that I think will fit. 😕 https://www.adcoprod.com/ac-covers Thanks! Patriot🇺🇸

@SeaDawg No heat pump or heat strip on the Truma Aventa.

A great story about your new to you Oliver! Hoping all goes through with a final purchase and that you begin enjoying many camping adventures! Congrats! Patriot🇺🇸

Awesome! We really like ours so far! Patriot🇺🇸

Hopefully the foot print of the Freshjet 3 will mirror the foot print of the Dometic Penguin Oliver uses. A direct retro fit and clean install is critical especially on an Oliver. It might be a good idea to ask if there will be any Fiberglass work necessary on the exterior or interior? We just had the Truma Aventa installed and it required a fair amount of fiberglass work by Oliver. It turned out excellent. Patriot🇺🇸

Yes the current Dometic AC’s are noise makers! Truma and Houghton are so much quieter that now Dometic is forced to step it up! Ya gotta love competition in the free market! 😊 Patriot🇺🇸

That’s wisdom! Learned this sticky trick years ago. Great to see it still being used. Thanks @rideandfly!

Thanks Max! Just a work in progress. I appreciate the kind words. Patriot🇺🇸

I wonder if the the Dometic Fresh Jet will retro fit and use the existing condensate drains like the Truma Aventa? Patriot🇺🇸