Mike and Carol

Looks like a great rally! I think regional rallies are a great way to get “neighbors” together. Mike

We have a Black Rifle coffee shop downtown in our little town of Boerne, TX. It’s more popular than the Starbucks on the other side of the freeway and is a great place to have a cup. The coffee is good, you can order the strength you like. We like it. Mike

I didn’t drill any holes. The switch sits on top of the middle battery inside the battery box. Not fancy but functional and easy, Mike

Installing a switch is just a matter of disconnecting cables from the battery and reconnecting to the switch. The challenge for me was just figuring out the best spot for the switch! Mike

Looks like you did a great job!

Welcome to the forum! Glad to hear your Q7 is doing the job. We’ve owned a bunch of Audi’s since our first new one in 1976! Keep us updated on your travels. Mike

Diesel is $2.99 at our Walmart, Quick Stop and HEB (Supermarket).

We’ve found that Loves and the other major truck stops almost always have high diesel prices. I always look for a Walmart, prices are always low. On major routes most small towns have a Walmart close by, gives us a chance to walk around a bit too. Even better are Buc-ee’s, always low price diesel, just not a lot of them around yet. Quik Stops and supermarkets are also lower price. Mike

My guess without seeing the cover is that it is Pete Marks, @bugeyedriver. He’s a HAM guy and mentioned being on the cover. Mike

Brian - three bolts, all with their own washers and nuts. I drilled up through the fiberglass, then through the bottom of the box. I had the box clamped to the tongue. The hardware is stainless steel with neoprene washers on the aluminum. Mike

Congratulations! Hope to see you out on the road - Mike

Great mod opening up some more storage space! It’s now on my to-do list. Mike

Ours travels on the floor of the closet. Carol has cooked up some great chili in ours, among other dishes. Mike

Bill, which model do you have? Mike

Exciting! Keep us all updated, there’s a lot of interest. Mike

Assuming you have AGMs now, I would wait until they’re at end of life and then replace with lithiums. That’s what I did. It would be nice to source our own USA lithium and make our batteries here. Mike

Same here.

Interested!

I’m on my third switch. I now carry a spare. Mike

Thanks, Craig. I’ll work on my screen name vs real name recall! Mike

Not sure who Craig is, I’ll check with Jason.

Yep. The site we were in was reserved before the cutoff. We normally just reserve after we arrive at the rally. Not this year. Mike

How does Oliver recommend disabling the 7pin?

This works for us too.

When my Xantrex 2K inverter was acting up a few years ago the Xantrex tech had me do a few things which did not solve the issue. Then he said to do a hard reboot. I left it overnight and when I reconnected the issue was gone. Mike