Jump to content

Recommended Posts

Posted (edited)

A quick search of "awning" on the forum returns about 50 pages of posts. With multiple brands having been installed on our Olivers over the years, there's a wide variety of satisfaction and usage. We are looking to replace our Girard awning. We'd like to be able to connect something more robust to the Oliver so that we have a place to cook outside protected from rain and wind. We understand that "protected from" is a matter of degree.

@Hokieman has suggested a MoonShade XL which is the direction we're thinking of (manual, staked down, wind walls available). Has anyone else added or replaced their awning?

Edited by John and Jodi

John and Jodi

San Antonio, TX

2022 Elite II - Hull #1126 being pulled by a 2022 F-150 Powerboost.

Map Legend: Red - Driven Through; Orange - Stopped In; Blue - Explored Parts; Green - Explored Whole

 

 

States20250506.png.6933c9e9b3d98a0f6721be33b0e952d1.png

travel trailer units for sale
Find Oliver Travel Trailers for Sale
New Travel Trailers for Sale
Posted

Never considered it, but for the record we have the Fiama brand and rarely if ever use it. Too much of a PITA to deal with. If you go through with it would love to hear your experiences in changing.

  • Like 2

Legacy Elite II #70

Posted (edited)

Here is a setup that @Mike and Carol posted, the awning is further stabilized with support posts and screen anchored for better securement. Maybe they or others with a similar setup will chime in with their experiences. 

IMG_8243.thumb.png.9f50037137707b4682e04f1d2e5f1bfb.png
 

This may be an adaptation of the Lippert Solera RV Awning Shade Screen or similar product, provided pic for example only:

IMG_8244.thumb.png.6041869b64298e54bb11b1da4522698b.png

Edited by Ronbrink
  • Like 2


Ron and Brooxie | Clear Lake (Houston), Texas

2020 OLEll, Twin, 579:

No installed solar, dual 30# propane tanks w/GasStop safety devices, Renogy 40A DC-DC charger, 460Ah LFP battery bank/Victron SmartShunt, auxiliary Cerbo-S GX/Victron 30A Blue Smart IP22 Charger combo, interior mounted Hughes Autoformer, twin independent sliding Lagun mount tables, extended dinette table and pantry landing, tongue-mounted hoist, Beech Lane refrigerator Ventilation/Evaporate Coil fans, metal valve stems with TST cap sensors and signal repeater, Waste Master sewer hose management system, Dreiha Atmos 4.4 A/C upgrade/Ceilo Breez Max thermostat, FlagpoleBuddy Starlink Mini suction mount kit.

2019 GMC Savana 2500 Cargo Work Van:

Explorer Limited SE, Low-Top 7 Passenger van conversion, 6.0L V8 Vortec, 6-Speed Automatic, RWD; Air-Lift LoadLifter air suspension/WirelessAir compressor; Bilstein B6 4600 Series shocks; metal valve stems for TST tire pressure monitoring system; Buyers Products cargo containment boxes/DC Cargo securement system; rear bumper DC-DC Anderson power cable outlet; 100Ah 12V portable power station/Dometic CFX 75L Dual Zone cooler; front 2” receiver hitch/QuikrStuff Mach2 double bike rack; Mechman 320A high output alternator; Starlink Mini/Veritas Vans magnetic mount.

  • Moderators
Posted
8 hours ago, Ronbrink said:

Here is a setup that @Mike and Carol posted, the awning is further stabilized with support posts and screen anchored for better securement. Maybe they or others with a similar setup will chime in with their experiences. 

IMG_8243.thumb.png.9f50037137707b4682e04f1d2e5f1bfb.png
 

This may be an adaptation of the Lippert Solera RV Awning Shade Screen or similar product, provided pic for example only:

 

That’s us.  We use our screen often with the awning (Fiamma).  If it’s windy we also stake down the support poles and the awning stays secure in some pretty high winds.  Mike

  • Thanks 1

Texas Hill Country | 2016 Elite II #135 | 2020 Ram 2500 6.7L Cummins

ALAZARCACOFLGAIDILKSKYLAMDMSMOMTNENVNMNYNCNDOHOKSCSDTNTXUTVAWVWYsm.jpgimage.jpeg.815d5dd040f6c139c307d1e86ae39bab.jpeg

 

Posted (edited)

@Mike and Carol What brand is your screen and where did you get it?

Also, how does it connect to the Flamma awning?

Thanks

Edited by dewdev

2018 Oliver Elite II, Twin Bed, Hull #354 

2024 RAM 1500, 4 x 4; Gas. 5.7L V8 Hemi MDS VVT Torque; 3.21 rear axle ratio w/TIMBREN spring rear suspension addition

Maine 

 

  • Moderators
Posted
2 hours ago, dewdev said:

@Mike and Carol What brand is your screen and where did you get it?

Also, how does it connect to the Flamma awning?

Thanks

We got it at Quartzsite at one of the vendors set up outside of the big tent.  Not sure what the brand is, there are no markings.  It slides into the one of the two Keder Rail slots on the Fiamma awning.  There’s a short piece that slides in and then the larger part of the awning zips into the smaller part at the top.  Mike

Texas Hill Country | 2016 Elite II #135 | 2020 Ram 2500 6.7L Cummins

ALAZARCACOFLGAIDILKSKYLAMDMSMOMTNENVNMNYNCNDOHOKSCSDTNTXUTVAWVWYsm.jpgimage.jpeg.815d5dd040f6c139c307d1e86ae39bab.jpeg

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...