Galway Girl Posted September 17, 2019 Share Posted September 17, 2019 I’ve done a modification to add an Optronics 7-Way trailer harness plug protector. Here’s the link to the part I used from e-trailer.(Including shipping and tax < $10 https://www.etrailer.com/Trailer-Plug-Covers/Optronics/ACP7B.html 7 Way Plug Protector - by Optronics And here’s where I mounted it…on the back of my Tongue Box. I used stainless #10 bolts to mount the unit. It could be mounted with zip ties to the bottom of the tongue as well if you don’t want to drill holes. The cover is a semi rigid type of rubber material but with enough flex to make it easy to insert or remove with one hand. In any case, I switched to this after my original “rubber cover” leaked. 2 2019 Elite II (Hull 505 - Galway Girl - August 7, 2019 Delivery) Tow Vehicle: 2021 F350 King Ranch, FX4, MaxTow Package, 10 Speed, 3.55 Rear Axle Batteries Upgrade: Dual 315GTX Lithionics Lithiums - 630AH Total Inverter/Charger: Xantrex 2000Pro Travel BLOG: https://4-ever-hitched.com Link to comment Share on other sites More sharing options...
Townesw Posted August 10, 2021 Share Posted August 10, 2021 @Galway Girl How has this Optronics 7 pin plug holder worked out? I read some reviews that said it was hard to get the plug in the holder and some reviews that said that the “latch” wouldn’t hold the plug if mounted vertically. Bill and Martha 2018 LEII Hull 313 Original owners 3/14/2018 2019 Chevrolet 2500HD Duramax Link to comment Share on other sites More sharing options...
ThomB87 Posted August 10, 2021 Share Posted August 10, 2021 I have not had a problem. 2 Bill Thomas 2019 Elite II Hull # 534 2020 Chevrolet Silverado HD 2500 Link to comment Share on other sites More sharing options...
Jim_Oker Posted August 10, 2021 Share Posted August 10, 2021 Ours is working fine. I used 3M VHB tape to mount it to the cargo box instead of bolts. I used the primer that 3M sells for the tape on both the plastic holder and the metal cargo box. It's been holding up quite well thus far. It is a nice low-stakes test of using VHB tape on the outside and w/o any caulking to protect it - 3M says this is usable "indoors or outdoor" and that it "Creates a permanent seal against water, moisture and more." 1 1 Jim and Yanna, Woodinville WA 2004 Ford E250 camper conversion Oliver Elite II hull #709 Link to comment Share on other sites More sharing options...
Jim_Oker Posted August 10, 2021 Share Posted August 10, 2021 Just now, Townesw said: I read some reviews that said it was hard to get the plug in the holder and some reviews that said that the “latch” wouldn’t hold the plug if mounted vertically. We haven't had either issue (and ours is indeed mounter vertically so as to make it tough for any water to get into the open end of the plug) 1 Jim and Yanna, Woodinville WA 2004 Ford E250 camper conversion Oliver Elite II hull #709 Link to comment Share on other sites More sharing options...
Frank C Posted August 11, 2021 Share Posted August 11, 2021 8 hours ago, Townesw said: @Galway Girl How has this Optronics 7 pin plug holder worked out? I read some reviews that said it was hard to get the plug in the holder and some reviews that said that the “latch” wouldn’t hold the plug if mounted vertically. Mine is mounted vertically also. Keeps water out, and no problems with plug retention. 1 Link to comment Share on other sites More sharing options...
dewdev Posted August 11, 2021 Share Posted August 11, 2021 I have a 7 pin plug holder mount on the front of the storage box which I do not use. The previous owner told me a no cost option. Tuck the 7 pin plug in between the fiberglass shell in front of the propane tanks and the frame of the trailer (the fiberglass shell is the one you can see in FrankC's picture.) This location works great, the plug stays in place and no moisture or water gets into the plug. 1 2018 Oliver Elite II, Twin Bed, Hull #354 2024 RAM 1500, 4 x 4; Gas. 5.7L V8 Hemi MDS VVT Torque; 3.21 rear axle ratio Maine Link to comment Share on other sites More sharing options...
taylor.coyote Posted August 11, 2021 Share Posted August 11, 2021 Yep, had bugs living in my 7 pin plug . this was the catalyst for me to get a plug storage cover. this option is a no drill solution that installs with worm screws that tighten the bands around your front jack. takes 5 minutes the install. its clean and works well https://www.amazon.com/gp/product/B01MFFC0IU/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Click image to open expanded view 2 2 2016 Legacy Elite II, Twin Beds, Hull #124 Tow Vehicle: 2019 Ford F250 4x4 / Short Bed / Crew Cab / 6.7 Diesel Fieldbrook, Ca Link to comment Share on other sites More sharing options...
Ray and Susan Huff Posted August 11, 2021 Share Posted August 11, 2021 11 hours ago, ThomB87 said: I have not had a problem. We bought one; attached it to the tongue (we don't have the storage basket) with zip ties, to see how it worked. My husband doesn't like that the holder fills up with road dirt while traveling. Unless you wash it out before storing the plug, the dirt transfers to the plug. He thinks there are better ways to store the plug and protect it from the elements. 1 Ray and Susan Huff Elite II Twin "Pearl" - Hull#699; delivered December 7, 2020 2013 F350 6.7l diesel Super Duty 4x4 long bed crew cab 1UP-USA Heavy-duty bike rack 2017 Leisure Travel Van Unity Twin Bed (sold) Link to comment Share on other sites More sharing options...
Moderator+ ScubaRx Posted August 11, 2021 Moderator+ Share Posted August 11, 2021 5 minutes ago, Ray and Susan Huff said: We bought one; attached it to the tongue (we don't have the storage basket) with zip ties, to see how it worked. My husband doesn't like that the holder fills up with road dirt while traveling. Unless you wash it out before storing the plug, the dirt transfers to the plug. He thinks there are better ways to store the plug and protect it from the elements. I can see where this would be a problem and I'm glad you pointed it out. Some of the time, I see these mounted the other way around and that is definitely a problem. So the protective cover needs a protective cover. Hmmmm, this could go on forever... 1 1 1 Steve, Tali and our dog Rocky plus our beloved Storm, Lucy, Maggie and Reacher (all waiting at the Rainbow Bridge) 2008 Legacy Elite I - Outlaw Oliver, Hull #026 | 2014 Legacy Elite II - Outlaw Oliver, Hull #050 | 2022 Silverado High Country 3500HD SRW Diesel 4x4 Link to comment Share on other sites More sharing options...
ThomB87 Posted August 14, 2021 Share Posted August 14, 2021 Maybe because mind is attached to the basket and higher up than the tongue, but I have no issues with dirt or other debris when traveling. Bill Thomas 2019 Elite II Hull # 534 2020 Chevrolet Silverado HD 2500 Link to comment Share on other sites More sharing options...
Jim_Oker Posted August 14, 2021 Share Posted August 14, 2021 On 8/10/2021 at 9:14 PM, Ray and Susan Huff said: Unless you wash it out before storing the plug, the dirt transfers to the plug. We have yet to encounter that issue. Possibly having mounted it to the rear side of the storage tray rather than to the tongue has helped, or perhaps we'll see more of this when we spend more time on dirty wet roads. 1 Jim and Yanna, Woodinville WA 2004 Ford E250 camper conversion Oliver Elite II hull #709 Link to comment Share on other sites More sharing options...
LongStride Posted August 14, 2021 Share Posted August 14, 2021 The one that attaches to the jack post with plastic worm gear clamps is a great option for those who shudder with trepidation at the thought of drilling holes into their Ollie. I have yet to drill a hole in mine, although I am certain the day will come sooner than later. Mike and Yasuko 2021 Legacy Elite Hull #820 Link to comment Share on other sites More sharing options...
Overland Posted August 15, 2021 Share Posted August 15, 2021 On 8/10/2021 at 9:48 PM, taylor.coyote said: Yep, had bugs living in my 7 pin plug . this was the catalyst for me to get a plug storage cover. this option is a no drill solution that installs with worm screws that tighten the bands around your front jack. takes 5 minutes the install. its clean and works well https://www.amazon.com/gp/product/B01MFFC0IU/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Click image to open expanded view That’s the same one I have and I’ll second the recommendation. Link to comment Share on other sites More sharing options...
Moderator+ ScubaRx Posted August 15, 2021 Moderator+ Share Posted August 15, 2021 On 8/14/2021 at 4:25 PM, LongStride said: ...I have yet to drill a hole in mine, although I am certain the day will come sooner than later. This project I did in 2016 might have driven you to drinking. 3 Steve, Tali and our dog Rocky plus our beloved Storm, Lucy, Maggie and Reacher (all waiting at the Rainbow Bridge) 2008 Legacy Elite I - Outlaw Oliver, Hull #026 | 2014 Legacy Elite II - Outlaw Oliver, Hull #050 | 2022 Silverado High Country 3500HD SRW Diesel 4x4 Link to comment Share on other sites More sharing options...
Ray and Susan Huff Posted August 15, 2021 Share Posted August 15, 2021 On 8/14/2021 at 11:31 AM, ThomB87 said: Maybe because mind is attached to the basket and higher up than the tongue, but I have no issues with dirt or other debris when traveling. We don't have the storage basket, so ours is mounted on the tongue. Ray and Susan Huff Elite II Twin "Pearl" - Hull#699; delivered December 7, 2020 2013 F350 6.7l diesel Super Duty 4x4 long bed crew cab 1UP-USA Heavy-duty bike rack 2017 Leisure Travel Van Unity Twin Bed (sold) Link to comment Share on other sites More sharing options...
Ray and Susan Huff Posted August 15, 2021 Share Posted August 15, 2021 On 8/10/2021 at 7:48 PM, taylor.coyote said: Yep, had bugs living in my 7 pin plug . this was the catalyst for me to get a plug storage cover. this option is a no drill solution that installs with worm screws that tighten the bands around your front jack. takes 5 minutes the install. its clean and works well https://www.amazon.com/gp/product/B01MFFC0IU/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Click image to open expanded view I like this, but I'm afraid to add any more mods to the Honey-do list. 1 Ray and Susan Huff Elite II Twin "Pearl" - Hull#699; delivered December 7, 2020 2013 F350 6.7l diesel Super Duty 4x4 long bed crew cab 1UP-USA Heavy-duty bike rack 2017 Leisure Travel Van Unity Twin Bed (sold) Link to comment Share on other sites More sharing options...
Moderators SeaDawg Posted August 16, 2021 Moderators Share Posted August 16, 2021 14 hours ago, ScubaRx said: This project I did in 2016 might have driven you to drinking Indeed! Nice work, @ScubaRx 2 2008 Ram 1500 4 × 4 2008 Oliver Elite, Hull #12 Florida and Western North Carolina, or wherever the truck goes.... 400 watts solar. DC compressor fridge. No inverter. 2 x 105 ah agm batteries . Life is good. Link to comment Share on other sites More sharing options...
ThomB87 Posted August 16, 2021 Share Posted August 16, 2021 Also beside a cover I use dielectric grease to keep moisture out of the plug. Should work on bugs too. Bill Thomas 2019 Elite II Hull # 534 2020 Chevrolet Silverado HD 2500 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now